Rock Island Auction Company
1-800-238-8022
Back to Catalog
Selling: December 5, 2014

Lot 1274: Colt - 1860

Sold for Colt - 1860
Full Screen
Sold For:
Rare and Extraordinary London Cased Colt Model 1860 Army Percussion Revolver
Estimated Price: $55,000 - $85,000
Serial #Colt - 1860 ManufacturerColt Model1860
TypeRevolver Gauge44 Percussion Catalog Page116
Barrel8 Inch Round FinishBlue/casehardened GripVarnished Walnut
Stock ClassAntique RatingSee Condition
DescriptionThis extraordinary Colt Model 1860 Army Revolver was manufactured in 1865. This Model 1860 Army Revolver is British proofed and has a Colt London address factory oak case with Pall Mall interior label and Colt's/Dixon bag powder flask, oil bottle and cap tin. British cased and proofed Model 1860 Army Revolvers are very rare. The revolver has a high polish blue finish on the barrel, cylinder, trigger guard and back strap. The loading lever, three screw frame and hammer are casehardened with vivid case colors. The one-piece walnut grip has a highly polished piano finish. The top of the barrel is roll-stamped "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" in one line. The cylinder is roll engraved with the Texas Navy battle scene and roll-stamped "COLTS PATENT No.", "ENGAGED 16 MAY 1843" is stamped in small letters along the forward edge of the cylinder. The left side of the frame is stamped "COLTS/PATENT" in two lines. "44 CAL" is stamped on the left shoulder of the trigger guard. The full serial number "154572" is stamped on the underside of the barrel lug, frame, trigger guard and back strap. The partial serial number "4572" is stamped on the cylinder. All of the visible serial numbers match. An "L" is stamped above the serial number on the lug and below the serial numbers on the frame, trigger guard and back strap. The "L" designation indicates that the revolver was intended for shipment to London. British London "Crown/P" and "Crown/V" inspection and proofmarks are stamped on the left side of the barrel lug and on the rebated portion of the cylinder above each chamber. The revolver features the blue steel trigger guard and back strap that were popular with British customers and hammer spur with bordered knurling. The lid of the British style oak case has brass screws around the edge and round brass plate inlaid in the center. The case has seven compartments and is lined with green baize. A 7 1/2 inch by 5 inch Colt instruction label with "14 PALL MALL LONDON S.W." address and red and black printing is glued to the inside of the case lid. The case contains .44 caliber round balls in the compartment with bone handle lid, steel cleaning rod with turned boxwood knob and slotted shank (COLT ACCOUTREMENTS by Robin Rapley p. 158) blue L-shaped screwdriver/nipple wrench, blue steel .44 caliber bullet mold for round balls and conical bullets with "COLT'S/PATENT" roll-stamped on the top of the sprue cutter in two lines and "44H" on the right block (Rapley M#28, p.137), pewter oil bottle stamped "JAMES DIXON/& SONS/SHEFFIELD" on the bottom (Rapley p. 160), key, "J. Blanch & Son" japanned 500 count cap tin with embossed brass disc (Rapley CT#30, p. 203), and medium size bag-shaped, powder flask with lanyard ring, brown lacquer body, gold-plated brass, three-position charger and niter blue spring marked "COLT'S NAVY FLASK" above the charger and "JAMES DIXON/& SONS/SHEFFIELD" below it (Rapley F#43, p. 108).

ConditionExcellent. The revolver retains 95% of the bright original blue and 99% vivid casehardened finish. Finish wear on the blue components is limited to some flaking on the left side of the barrel at the muzzle and on the bottom and front edges of the trigger guard and a few minor handling marks. There is a light drag line on the cylinder but no flash pitting on the cylinder exterior. The percussion nipples have minimal flash pitting; the revolver exterior has minimal firing wear. The cylinder retains nearly all of the Texas Navy scene. The loading lever, frame and hammer retain 99% of the brilliant case colors. There is some light flash pitting in the hammer well and on the inside of the hammer spur. The screws are excellent and retain nearly all of the niter blue finish. The grips are excellent with 98% of the piano finish varnish intact and minimal handling or storage marks. The case exterior is fine with light handling wear and a few scratches. The interior is fine. The green baize lining is slightly faded but is clean. Wear is limited to several light oil stains from contact with the revolver cylinder and recoil shield. The accessories are excellent. The cleaning rod, screwdriver and oil bottle show minimal wear. The bullet mold is excellent and retains at least 95% of the dull blue finish with sharp markings. The scarce Blanch & Son cap tin is in very good condition with 90% of the brown japanned finish intact and most of the original caps. The Dixon powder flask is exceptional; the body retains 98% of the brown lacquer finish. The top and charger have almost 95% of the gold plated finish with crisp markings and the niter blue spring has nearly all of the finish intact. This is an exceptional example of a rare cased London Colt Model 1860 Army Revolver.
Click here to see keyboard shortcuts.
F Enters/exits full screen view for items
Esc Exits full screen view for items
Moves to previous lot, or moves to previous image if full screen view is enabled
Moves to next lot, or moves to next image if full screen view is enabled
Fully zooms the image when full screen view is enabled
Fits the entire image to the screen when full screen view is enabled

Payment

Buyer’s Premium: 17.5%

Cash Payment Discount: 2.5%

Participation Requirements: Valid Credit Card required for bidding approval. You will have the option to pay with these payment options: Visa, MasterCard, Discover, Check, Money Order, Wire Transfer, and Cash.

Sales Tax: It varies each auction typically around 94% of auction items are not subject to sales tax. Read more here on sales tax.

We will contact you after the auction to arrange payment and shipping.

Terms

Premiere Auction Terms

Terms and conditions regarding Premiere Auctions. Revised : 08/29/2014

Shipping

SHIPPING CHARGES. All shipping charges must be paid by the successful bidder prior to delivery of the firearm. If Rock Island Auction (RIAC) is asked to ship the purchased lots, there will be a separate charge for such shipping. Shipping charges will be based upon what it costs RIAC to ship the purchased lots to the purchaser. All items must have shipping insurance; this insurance is mandatory. RIAC will not charge any labor charges for shipping. RIAC is not liable for any acts of omissions in packaging or shipping. Purchased lots handled by outside carriers or packers, including those RIAC may have recommended, may carry their own insurance and any claims for losses or damages should be addressed directly to the outside carriers or packers. RIAC will arrange for packing and shipping at RIAC’s earliest possible convenience. RIAC will attempt to ship as soon as possible; however, due to RIAC’s high volume of absentee bids, shipping can take up to two weeks after full payment is received. In the case of crating or any exceptional packaging, the purchaser will be charged RIAC’s cost from outside agents. Purchaser pays shipping, packing materials, and insurance charges. The shipping of any purchased items outside of the United States is hereby classified as “foreign export”. All foreign export is the sole responsibility of the purchaser.