Page 256 - 83-BOOK3

LOT 3471
“Terri” Engraved Perazzi Model SC3 Over/Under Shotgun with Case - Serial no. 113460, 12 gauge, 30 inch vent rib bbl., blue/coin finish, walnut stock. Manufactured in 1998. Blued steel barrels with steel mid and white
front sight beads on the raised, matted vent rib, interchangeable choke system (cylinder/skeet installed), and chambers marked 70 mm (2 3/4
inches) with ejectors. The barrels bear standard markings along with single bands of engraving at either end of the chambers. The coin finished action displays
beautiful near full coverage scroll engraving with intertwining line design and floral motifs on the left, right, and underside as well as on the trigger guard and
triggerplate. The engraver’s signature, “Terri”, can be seen on the underside of the action to the right of the triggerplate. Single gold selective trigger and tang
mounted safety switch with gold inlaid “S”. Superbly figured, multi-point checkered walnut forend with Deeley latch release and engraved fittings and pistol
grip stock with adjustable comb and Kick-Eez rubber recoil pad. Includes a factory takedown case, stock removal tool, case for an extra barrel (none included),
extra small parts, and five extra Briley choke tubes (light modified, modified, improved cylinder, light full, and full) with choke tool. Barrel and stock measurements (U/O): bore diameters 9 inches from the breech both marked 18.4 (.724 inches) and both measured .725 inches; minimum wall thickness .036/.035 inches; 1 7/16 inch drop at comb (adjustable); 2 1/8 inch drop at heel; 14 9/16 inch length of pull; cast-off; weight 8 lbs 12 oz. CONDITION: Excellent overall, retaining 99% plus original blue and coin finishes, minor handling evidence, and few tiny marks in the wood, and sharp checkering on the wood. The cases and accessories are all very fine. Mechanically excellent.
LOT 3472
Factory Engraved Connecticut Shotgun Manufacturing Co. 20 Gauge Inverness Over/Under Shotgun with Case - Serial no. I-00426, 20 gauge, 28 inch vent rib bbl., blue/casehardened finish, walnut stock. Blued steel barrels
with single brass bead sight on the matted vent rib, the left side of the upper barrel is marked “INVERNESS/20 GAUGE 3”” and the right side
is marked “CONNECTICUT SHOTGUN M.F.G. CO./N.B. CT. USA”, interchangeable choke system (improved modified/improved cylinder installed), and 3 inch
chambers (as marked) with ejectors. The casehardened round body action features beautifully executed traditional English rose and scroll engraving and
incorporates “INVERNESS” in a banner on the underside. The engraving also covers the release lever and trigger guard. Single trigger and tang mounted safety/
selector switch. Brilliant, exhibition grade, multi-point checkered walnut forearm with matching engraved rear fitting and Anson button style release. The pistol grip stock is of the same superb exhibition quality and features a red rubber recoil pad. Includes a factory takedown case containing three extra choke tubes (full, modified, and SK1) and choke tool. Barrel and stock measurements (U/O): bore diameters measured 9 inches from the breeches .619/.615 inches; minimum wall thickness .030/.032 inches; 1 7/16 inch drop at comb; 2 1/8 inch drop at heel; 14 1/4 inch length of pull; weight 6 lbs 7 oz.
CONDITION: Excellent overall, retaining 99% original blue and casehardened finishes, limited handling evidence, and sharp checkering on the forend and stock. The case is also excellent. Mechanically excellent. Estimate: 6,500 - 9,500
Estimate: 8,000 - 12,000
254