ND - VERY GOOD- in working condition, 80% finish or better, appreciable wear on working surfaces 80% - 89%, no corrosion or pitting, minor surface dents or scratches. Wood condition commensurable with percent of finish with dings and dents associated with 80% - 89% gun.

OG - POOR- major or minor parts replaced; major replacement parts required and extensive restoration needed; metal deeply pitted; principal lettering, numerals and design obliterated, wood badly scratched, bruised, cracked or broken; mechanically inoperative; generally undesirable as a collectors firearm in its present state.

NPRF - NON-PROFESSIONALLY REFINISHED/COLD BLUE, ETC.

Warning: Obstruction in barrel approximately 14" from muzzle.

NF - FAIR- 0% - 40% with generally smooth finish, may have mild cleaning yet not deeply pitted, but well worn, replacement of minor parts may need mechanical adjustments, may have rust and may have corrosion pits which do not render article unsafe or inoperable. In working condition. Wood condition commensurable with percent of finish with dings and dents associated with 0% - 40% gun.

Includes JCPenny Model No. 4510 4x32 scope.

NG - POOR- major or minor parts replaced; major replacement parts required and extensive restoration needed; metal deeply pitted; principal lettering, numerals and design obliterated, wood badly scratched, bruised, cracked or broken; mechanically inoperative; generally undesirable as a collectors firearm in its present state. Finish obscured by heavy cleaning, rust or corrosion.

NG - POOR- major or minor parts replaced; major replacement parts required and extensive restoration needed; metal deeply pitted; principal lettering, numerals and design obliterated, wood badly scratched, bruised, cracked or broken; mechanically inoperative; generally undesirable as a collectors firearm in its present state. Finish obscured by heavy cleaning, rust or corrosion.

Upper barrel flat marked "GR DOUGLAS 45 CAL".

NE - GOOD- in working condition, wear on working surfaces, finish 40% - 79%, no broken parts, no corrosion or pitting that will interfere with proper functioning, but may have some minor surface pitting. Wood condition commensurable with percent of finish with dings and dents associated with 40% - 79% gun.