These Model 1902 Luger carbines were an attempt by DWM to a produce a lightweight rifle substitute. There were a total of 2,500 of this model reportedly produced in two serial number blocks. The desirable features of these carbines include the long frame, flat mainspring, grip safety, dished toggles, recessed/flat breech bolt, and the 11 3/4 inch barrel. Due to the longer barrel, these carbines have a small spring accelerator mechanism in the forearm that aids in cycling. Fitted with a three position rear sight (adjustable from 100-300 meters) mounted on top of the barrel in front of the receiver and a bead front sight mounted on a ramp on top of the barrel. The top of the chamber area is blank, and the front toggle has the DWM logo. Full serial number marked on the frame extension and the underside of the barrel. The last two digits of the serial number are marked on the bottom of the recoil lug, grip safety, trigger, takedown lever, side plate, breech bolt, and toggle assembly. Numbered "511" inside the replacement forend. Unnumbered replacement walnut grips. Fitted with a nickel plated magazine with "GERMANY" stamped on the wooden base. The included period walnut shoulder stock features a checkered wrist, lower sling swivel, black horn buttplate, and is numbered "506" on top of the attaching iron.

Fine, retains 60% faded original blue finish with freckling and edge wear, handling marks, some patches of light pitting, and recut checkering on the re-oiled replacement grips. The bolt hold open is not properly functioning, otherwise mechanically fine. The shoulder stock is fine, with some light handling marks and dents, some patches of light corrosion visible on the iron, and numerous insect holes on the buttplate.