Three dot sights, with standard markings, alloy frame, ambidextrous decocker safety and magazine catch, and checkered grips. In Ruger case with extra magazine, papers, and sleeve numbered to gun.

Near new in case, with some minor handling marks.

Fixed sights, 50th anniversary logo on the chamber, standard markings, serrated trigger and checkered grips with red eagle medallions. In a 50th Anniversary case numbered to gun, with papers, extra magazine and shipping sleeve.

Near new in case, with some tiny dings on the underside of the muzzle and minimal handling marks overall. Grips are sharply checkered with minor scratching. Mechanically excellent.

Marked "COMPETITION TARGET MODEL" on the right rear of the frame, fixed front and adjustable rear target sights, blue serrated trigger and fitted with checkered laminated grips with right hand thumb rest. Complete with original box and outer cardboard container numbered to the gun. The outer container shipping box still has the original paper wrapping and shipping label.

Near new in box with only light handling marks. The grips are as new.

Introduced in 1994. Fixed three dot sights, standard markings, ambidextrous magazine release and decocker and ribbed grips. In case with papers, extra magazine and shipping box numbered to the gun.

Near new in case, with only light handling marks.

Introduced in 1999. 3 dot sights, standard markings, ambidextrous decocker, serrated ring hammer and polymer frame with ribbed grip section. In case numbered to gun with papers, loader, extra magazine and shipping box.

Near new in case, with only light handling marks.

Introduced in 1997. Three-dot sights, with standard markings and ribbed red medallion grips. In original case with papers, padlock and extra magazine.

New in case.

Introduced in 2004. Three dot sights, with a loaded chamber indicator, standard markings, decocker safety, serrated hammer and polymer frame with integral mounting rail and checkered red eagle grips. In case numbered to gun with extra magazine, papers, magazine loader and padlock accessories.

Near new in case with a few light handling marks.

Fixed blade and notch sights, with "LCP" on the left side of the slide, address on the right and caliber markings on the chamber. One piece synthetic frame, with smooth trigger, finger grooves and checkered and serrated grip section. In box numbered to gun with papers, pouch and padlock.

New in box.

Three dot sights, bobbed hammer, ambidextrous magazine catch and checkered grips. In gray plastic case with extra magazine and shipping sleeve.

Near new in case, with storage residue and light handling marks.

Introduced in 1996. Three dot sights, slide mounted decocker, standard markings and ribbed grip section. With gray plastic case, extra magazine and shipping sleeve.

Near new in case, with only minor handling marks.

Introduced in 2005. Interchangeable Lite Pipe front sight and adjustable V-notch rear, with drilled and tapped receiver, chamber indicator and half checkered red eagle grips. In case with papers, sight rail, front sight inserts and extra magazine.

Near new in case, with only minor handling marks.

Introduced in 1996. Three-dot sights, standard markings, decocker safety, ambidextrous slide catch, frame mounted light rail and textured and ribbed grip. In a gray plastic case numbered to gun with a padlock, papers and extra magazine.

Excellent, with 98% of the original satin stainless finish, showing mild spotting on the slide catch and safety lever. Grips and action are both excellent. Case is excellent.

Patridge blade front and adjustable rear sights, standard markings, chamber indicator, and checkered grips with red medallions. In case numbered to gun with scope rail, papers, padlock and an extra magazine.

Near new in case, with only light handling marks.

Adjustable three dot sights, with standard markings, loaded chamber indicator, trigger and ambidextrous manual safeties, ambidextrous magazine catch, frame rail and checkered grips with ribbed backstrap. In case numbered to gun, with extra magazine, papers, padlock and a CKRT First Production Run SR9 folding knife with 3 1/4" partially serrated blade.

Near new in case, with only minor handling marks. Knife is excellent.

Introduced in 1992. Produced without sights, standard markings, polished bolt, integral ring bases on receiver, checkered pistol grip stock and a solid rubber recoil pad. With box numbered to gun, scope rings and papers.

Near new in box, with minimal light handling marks. Box shows light wear.

Raised bead front and folding adjustable notch rear sights, with standard markings, integral ring bases on the receiver, rotary magazine, checkered pistol grip stock, sling swivel studsand a serrated Ruger buttplate. With Ruger box numbered to gun and papers.

Near new in box, with minimal light handling marks. Box is fair.

Discontinued in 2007. Blade and adjustable notch sights, with integral mounting bases on the receiver, standard markings, and a checkered pistol grip stock with ribbed buttplate. With factory box numbered to gun and papers.

Near new in box, with only light handling marks.

Blade front sight and folding aperture rear sight on the receiver, along with standard markings and integral ring bases. Smooth pistol grip stock, with a serrated Ruger buttplate. With original box numbered to gun, scope rings and papers.

Excellent, with 99% plus of the original blue finish, showing light handling marks on the metal and wood. Mild tearing of the box, which is otherwise fair. Mechanically excellent.

Introduced in 1987. Blade front and adjustable fold-down rear sight, standard markings and integral base mounts on the receiver, smooth pistol grip stock, sling swivels and smooth buttplate. With original box with papers and scope rings.

Near new in box, with only minor handling marks. Box is fair, with some holes and tears.

Ramp blade front and quarter rib-mounted 3-leaf express rear sight, with standard markings, ring bases on the receiver, checkered pistol grip stock with ebony and blue steel accents, sling swivel studs and a solid rubber recoil pad. With Ruger box numbered to gun, papers, scope rings and a shipping sleeve.

Near new in box with only slight handling marks overall. Box shows minor tears.

Blade and folding adjustable notch sights, integral scope rail and cocking indicator on the receiver, standard markings, rotary magazine, casehardened lever, smooth pistol grip stock and carbine buttplate. With a Ruger box numbered to gun, papers and shipping sleeve.

Near new in box, with light handling marks on the metal and a tiny chip on either side of the stock immediately ahead of the receiver. Mechanically excellent.

Blade and adjustable peep sights, standard markings, 5 round magazine, smooth pistol grip stock, sling swivels and a smooth buttplate. With Ruger box hand-numbered to gun, papers and shipping carton.

Excellent, with 99% original blue finish, showing some dings and fading near the muzzle, and mild handling marks overall. Stock is also excellent with only light handling marks. Box is fine, with some tears and holes. Mechanically excellent.

Standard markings, blade front and single folding leaf rear sights, the top of the receiver is drilled and tapped for scope mounting, cocking indicator, and the carbine is mounted with a smooth pistol grip stock with plastic carbine buttplate. Complete with the original box numbered to the gun and shipping box.

Near new in box with only light overall handling marks. The box is very good, with some tape repair on the shipping box. Mechanically excellent.

Introduced in 1998. Blade and adjustable notch sights, with standard markings and ring bases on the receiver, detachable magazine and checkered pistol grip stock with Ruger imprints and ribbed rubber buttplate. With original box numbered to gun, papers and shipping sleeve.

Near new in box with minimal handling marks. Box is very good, sleeve shows a few tears.

Introduced in 2007, a pistol built around the 10/ 22 action. Manufactured without sights, with a mounting rail fitted to the top of the receiver, wide serrated trigger, and long magazine catch. Smooth green laminate stock, with a semi-beavertail forearm, sling mount, and contoured pistol grip with backstrap knuckle and flared butt. In box numbered to gun with a carrying case, spring loaded bipod, papers and a gun lock.

New in box.

Introduced in 1984. Produced without sights, ring bases on the receiver, standard markings, rotary magazine and checkered pistol grip stock with Ruger medallion grip cap, sling swivel studs and a solid recoil pad. In box numbered to gun with scope rings and shipping sleeve.

Near new in box, with some light handling marks overall. Shipping sleeve is missing an end.

Introduced in 1999. Blade front sight and folding leaf adjustable rear sight. Standard markings, the top of the receiver is milled to accept the Ruger scope ring system, and mounted with a smooth one piece pistol grip stock with steel carbine buttplate. Complete with the original box numbered to the gun.

Near new with only light handling marks.

Introduced in 1998. Bead front and folding adjustable notch rear sights, standard markings, ring bases on the receiver, detachable rotary magazine and checkered one piece pistol grip stock with a Ruger grip medallion, sling bases and a black rubber buttpad. With original box numbered to gun, scope rings and papers.

Near new in box, with a tiny amount of spotting on the bolt handle and minimal handling marks. Stock is excellent, with a few light scuffs. Some tape repair to box. Mechanically excellent.

Ramp white bead blade front and adjustable notch rear sights, with standard markings, satin finished bolt, engraved Ruger logo on the floor plate, checkered pistol grip stock, Ruger medallion grip cap and solid recoil pad. With Ruger box numbered to gun, papers and scope rings.

Near new in box, with light handling marks. Box shows a few minor tears.

Introduced in 1997. Bead blade front and folding adjustable notch rear sights, standard markings, integral scope ring bases on the receiver, in-line bolt action striker and smooth pistol grip stock with ramrod, sling swivel studs and a solid recoil pad. In box numbered to gun with accessory kit, rings, papers and a shipping box.

Near new in box, with minimal light handling marks. Sleeve and box show some mild wear.

Blade front and ghost ring rear sights, with standard markings and integral mounting bases on the receiver, plastic upper handguard and textured rubberized stock with NRA medallion in the pistol grip and Hogue recoil pad. With original box numbered to gun, papers and scope rings.

Near new in box, with only light handling marks.

Introduced in 1992. Ramp bead front and 2-leaf express rear sights, the latter mounted on a quarter rib, with standard markings, integral ring bases on the receiver, and a checkered circassian walnut stock with ebony tip, medallion grip cap, sling swivel studs and a solid recoil pad. With box numbered to gun, shipping sleeve, cable lock, scope rings and papers.

Near new in box, with minimal light handling marks. An end is absent from the sleeve, with light wear on the box.

Bead and folding adjustable peep sights, standard markings and integral ring bases on the receiver, detachable rotary magazine, smooth pistol grip stock and flat buttplate. With factory box numbered to gun, papers, scope rings and cable lock.

Near new in box, with only light handling marks. Box is very good, with a few light scuffs.

Introduced in 2000. Dual brass beads on the high vent rib, with screw-in choke tube, auto-ejector and 2 3/4" chamber. Satin finish receiver, with gold fill on the Ruger marking, "RUGER/ CONTROLLED/ PATTERN/ TRAP MODEL" on each side and wide adjustable trigger. Checkered beavertail forearm and pistol grip stock with adjustable comb, length of pull and a solid Decelerator recoil pad. In box numbered to gun with tools, extra choke tube and a cable lock. Unadjusted length of pull is 13 5/8 inch.

Excellent, with 98% of the original finish, showing light handling marks and signs of firing. Stock is in equal condition. Box shows mild wear.

Single brass bead sight, with chokes marked "FULL/ MOD.", ejectors and 2 3/4" chambers. Three line address on underside of receiver, with single trigger and tang safety/ selector. Checkered pistol grip stock with beavertail forearm, red medallion grip cap, fancy grain buttstock and solid recoil pad. Length of pull is 14". With original box numbered to gun and papers.

Excellent, with 99% of the original blue finish, showing some light wear in the chamber area and on the underside of the receiver. Stock is excellent, with the grain especially attractive on the left side of the butt. Box shows minor staining.

Dual brass bead sights, with screw-in choke tubes, ejectors and 3" chambers. Three line address on underside of receiver, with single trigger and tang safety/ selector. Checkered pistol grip stock with beavertail forearm, brass medallion grip cap, fancy buttstock grain and solid recoil pad. Length of pull is 14". With original box numbered to gun, papers, choke tool and 3 extra chokes.

Near new in box, with only light minor handling marks and attractive wood grain. Box shows mild wear.

Introduced in 1977. Single brass bead sight, with chokes marked "MOD./ IMP. CYL.", ejectors and 3" chambers. Three line address on underside of receiver, with single trigger and tang safety/ selector. Checkered pistol grip stock with beavertail forearm, red medallion grip cap, fancy buttstock grain and solid recoil pad. Length of pull is 14". With original box numbered to gun, papers, and internal boxes with red leatherette label.

Near new in box, with only minor handling marks. Box is very good, with some folding and scuffs.

Single brass bead sight, with screw-in choke tubes, ejectors and 2 3/4" chambers. Three line address on underside of receiver, with single trigger and tang safety/ selector. Checkered pistol grip stock with beavertail forearm, brass medallion grip cap, fancy buttstock grain and serrated buttplate. Length of pull is 14 1/4". With original box numbered to gun, papers, choke tool and three extra tubes.

Near new in box, with some only minor light handling marks. Packaging shows a few dents and scuffs. There is a dent in the lid of the box, which reaches through to the inner barrel box.

Produced by Ruger using a 10/22 barreled action installed into a housing and stock unit produced by Nordic Components. Produced without sights, with a birdcage flash hider on the heavy barrel, free-floating tube forearm with mounting points for Picatinny rails, standard receiver markings with integral sight rail, textured rubber pistol grip and multi-position telescoping buttstock. In box numbered to gun with papers, lock and shipping sleeve.

Near new in box, with only light handling marks.

According to the information provided by the consignor, this collection was started by his father, who was a Ruger employee from the 1950's onward. As the story goes, in the mid-1950s Ruger extended an option to its employees to reserve a low serial number, essentially giving them right of first refusal on each gun produced in that number, in order to start their own private collections. His father's original number, 00061, was reportedly given by Bill Ruger to a VIP with Charter Arms on accident, and by way of apology Ruger issued him serial number 00038 out of his own personal 00001-00040 reserved number range. Every gun in this lot is with its original box, with the majority in new to near new condition, and all with serial numbers ending in 00038, with the three starting numbers appropriate to each model. The GP-100 was introduced in 1986, with this example showing standard markings, adjustable rear sight, smooth trigger and rubber grips with smooth wood panel inserts. In box with papers and shipping sleeve numbered to gun. Also included with the lot is a large amount of Ruger memorabilia, the majority of which was given by the company directly to the employees, including a number of mugs, steins, anniversary pins, matchboxes, a Ruger 30 Year commemorative wall calendar, 30th Anniversary gun cleaning pad, and additional items. This collection has an on-going status, when a new firearm is manufactured the Factory will continue to entitle serial number 00038 to the collection. The buyer may purchase the firearm from the seller at seller's cost, which is approximately 60% off the retail price.

Near new in box, with minimal light handling marks.

Introduced in 2000. Blade and adjustable notch sights, standard markings, fluted cylinder and smooth grips with black eagle medallions. In Ruger box with sleeve numbered to gun.

Near new in box, with only minor handling marks and a faint cylinder drag line.

Introduced in 1988. Blade front and adjustable rear sights, standard markings, unfluted cylinder and smooth grips with black medallions. In box with papers and shipping sleeve hand numbered to gun.

Excellent. The revolver retains 99% original finish with several minor scratches overall, heaviest on the frame, and faint drag line on the cylinder. The grips are as new

Introduced in 1979. Blade front and adjustable notch rear sights, standard markings, fluted cylinder, checkered hammer and smooth medallion grips. With Ruger box.

Near new in box, with only minor handling marks and a noticable cylinder drag line. A small scuff is present on the left grip panel. Mechanically excellent.

Introduced in 1988. Blade front and adjustable rear sights, standard markings, unfluted cylinder and smooth grips with black medallions. In box with papers and shipping sleeve hand numbered to gun.

Near new in box, with only light minor handling marks.

Introduced in 1988. Blade front and adjustable rear sights, standard markings, unfluted cylinder, barrel rib milled for Ruger scope rings and fitted with smooth laminated grips with black and silver medallions. Complete with the original box with Ruger scope rings and shipping box hand numbered to gun.

Near new in box with only light overall handling marks and a faint drag line on the cylinder.

Standard markings, the top strap is milled to accept the Ruger scope ring system, fixed front sight with red insert, adjustable rear sight and fitted with a combination rubber and Goncalo Alves grips. Complete with the original box and shipping box numbered to the gun and a pair of Ruger scope rings.

Near new with a few light scratches and faint cylinder drag line. Grips are excellent with light handling marks.

Blade front sight and adjustable rear sight, standard markings, all blue finish and fitted with smooth two piece walnut grips with Ruger medallions. Complete with the original box, extra 44 Remington Magnum cylinder, papers and shipping box shared with "J" of this lot.

New in the box.

Introduced in 1988. Fixed sights, standard markings, 5-round cylinder, checkered hammer and rubber grip with ribbed plastic panels. With original box to gun, papers and shipping sleeve numbered to the gun.

Excellent, with 99% plusof the original finish, showing some light handling marks on the metal and grip. Box is excellent. Mechanically excellent.

Blade front sight and adjustable rear sight, standard markings, all blue finish and fitted with smooth two piece walnut grips with Ruger medallions. Complete with the original box, extra 38-40 Winchester cylinder, papers and shipping box shared with "H" of this lot.

Near new with a faint cylinder drag line.

Fixed sights, with standard markings, casehardened frame and smooth medallion grips. In a Ruger box with papers and shipping sleeve numbered to gun.

Near new in box, with only minor handling marks

Introduced in 1994. Fixed sights, standard markings, and smooth grips with black medallions. In a plastic case numbered to gun with papers and a padlock.

Near new in case, with only light handling marks.

Fixed sights, with standard barrel markings, hinged loading lever, unfluted cylinder and smooth simulated ivory medallion grips. In Ruger gray case with papers and cable lock.

Excellent, 99% plusoriginal finish, with some light frosting and handling marks on the surface. Grips are new.

Fixed sights, with standard markings, casehardened frame and checkered grips. In Ruger gray case numbered to gun with papers.

Excellent. The revolver retains all of the original blue finish with only a very faint cylinder drag line. The case colors are geginning to silver out on the topstrap otherwise bright.

Introduced in 2005. Blade and adjustable notch sights, unfluted cylinder, standard markings, and textured wraparound rubber grips. In Ruger gray case numbered to gun with papers.

Near new in case, with a small rough spot on the right side of the muzzle, light handling marks overall, and a barelynoticable cylinder drag line.

Blade front and adjustable Micro rear sights, with flattop frame, gold filled commemorative marking on the barrel, and checkered grips with black eagle medallions. In case numbered to gun with papers and padlock.

Near new in case, with minimal light handling marks.

Fixed sights, flattop frame, gold filled commemorative markings on top of barrel and checkered black eagle grip. In a Ruger red case numbered to gun with papers and lock.

Near new in case, with some light minor handling marks.

Made in 2008. Fixed sights, with gold commemorative markings, roll engraved and gold banded cylinder. Gold finished trigger guard and smooth grips. In box numbered to gun with pouch, papers and lock.

Near new in box, with only minor handling marks.

Pinned blade front and groove rear sights. Address and model markings on the barrel, with a enclosed hammer, fluted cylinder, smooth trigger and a set of Hogue Tamer grips. In box numbered to gun with pouch, papers and gun lock, which weigh more than the revolver itself.

New in box.

Produced in 2009. Blade front and adjustable rear sights, with gold filled commemorative markings on top of the barrel, gold banded unfluted cylinder, and smooth black medallion grips. In box numbered to gun with pouch, lock and papers.

Near new in box, with only light minor marks overall and a faint cylinder drag line.

Blade and notch sights, with "1 OF 5000" on the barrel, Bill Ruger's signature roll stamped on the extension, standard markings and checkered grips with Red Eagle medallion. In box with papers, "salt cod" wood case and shipping sleeve numbered to gun.

Near new with only light overall handling marks.

Introduced in 1997. Partridge front and adjustable rear sights, with standard markings and ribbed grips. In original case with shipping sleeve, papers, padlock and extra magazine.

Near new in case, with only light handling marks.

Fixed sights, standard markings and checkered grips with black eagle medallion. With Ruger box, papers and shipping sleeve numbered to gun.

New in box.

Introduced in 1982 and features a fixed front sight with adjustable rear target sight, blue serrated trigger, bull barrel and checkered black plastic grips with silver Ruger logo on the right panel. Complete with original box and outer cardboard container numbered to the gun.

New in box.

Introduced in 1987. Three dot sights, standard markings, ambidextrous decocker safety and magazine catch, alloy frame and ribbed grips. In case with extra magazine, papers, and shipping box.

Excellent, with 99% of the original matte finish, showing some bright edge wear and minor scuffs and handling marks. Mechanically excellent.

Introduced in 1991. Three dot sights, standard markings, slide mounted decocker safety, and ribbed grips. In case with extra magazine, papers and shipping sleeve.

Near new in case, with only minor handling marks.