With a high visibility orange blade type front and white bead mid sights on the matte vent rib. With 3 inch chambers (marked as 2 3/4") and improved modified/modified chokes. The frame features delicate floral and scroll engraving with trap shooting themes on the sides. Both sides features a clay pigeon in flight with the word "MARK" on the right side and "PULL" on the left. The underside is similarly scroll engraved and marked with the model designation and "MADE IN ITALY". With a single adjustable gold washed trigger and tang mounted manual safety switch. Mounted on a nicely figured multi-point checkered beavertail forearm with finger grooves, engraved hardware and pistol grip stock with an inset Beretta medallion in the grip end and a Beretta vented recoil pad. Length of pull is 13 1/4 inches. Includes a Beretta take down case.

Good as partially refinished and altered (barrels). The chambers have been lengthened to 3 inches and a half inch has been removed from the front of the barrels (barrels marked as 30"). Displaying areas of moderate pitting on the barrels nearer the muzzle that have been cleaned with a thin layer of new finish and some mixed gray patina. The frame has very sharp engravings and only light handling marks. The wood is very good with the butt trimmed , some small indentations, a few light chips at the junction with the pad and sharp checkering. Mechanically excellent. The case is excellent with general storage and handling type marks on the exterior.