The Skeet Grade was manufactured from 1936 to 1959. White bead front and metal mid bead sights on the matte solid barrel with 2 3/4 inch chambers and choked WS1/WS2 with ejectors. The left barrel at the breech is marked "MODEL 21 WINCHESTER/TRADEMARK - 20 GAUGE 2 3/4" and the underside is marked "WINCHESTER PROOF STEEL" and "WS-2" (left) and "WS-1" (right). The water table and barrel flats are marked with the Winchester oval proofmark. The right side of the water table is unmarked with the exception of the proof, and the three-line address and model marking is on the left side. The bottom receiver plate directly ahead of the trigger guard is marked "SKEET". The matching serial number is marked on the upper tang, on the left side barrel flat, and on the forearm hardware and wood. Single trigger with selector, tang mounted manual safety with gold "SAFE" and mounted with fancy checkered beaver tail forearm and straight wrist stock with a factory checkered bare butt. Barrel and stock measurements are: bore diameter at 9 inches from breech .513/.513 inches; wall thickness at 9 inches from breech .0935 inches; drop at comb 1 1/2 inches; drop at heel 1 7/8 inches; length of pull 13 7/8 inches.

Excellent with 95% plus original blue finish. Displaying mild edge wear on the muzzle, and breech, and small handling marks. The wood is very fine with small surface scratches, handling marks, sharp checkering, and a few scattered small indentations. Mechanically excellent.