White bead front and steel bead mid sights on the solid matte rib barrels with standard fourth style markings on the left side, 2 3/4 inch chambers, ejectors, and "WS-2/IMP-MOD" chokes. The underside of the barrels and flats have standard markings including the Winchester "WP" proof. The water table has the "WP" proof on the right side and the third style three-line model and address stamp on the left. Both barrel sets, receiver, forearm hardware, and wood have matching serial numbers. Mounted on a multi-point checkered beavertail forearm and pistol grip stock with a smooth steel grip cap, and a solid rubber recoil pad with a thin leather cover on the end. The second 20 gauge barrel set is also 26 inches long with dual bead sights, standard markings, 2 3/4 inch chambers and "IMP-CYL/MOD" marked chokes. The barrel and stock measurements are: bore diameter at 9 inches from breech .615/.615 inch; wall thickness at 9 inches from breech .042/.042 inch; drop at comb; 1 5/8 inches; drop at heel 2 1/8 inches; length of pull 13 3/4 inches. The measurements for the second barrel set are: bore diameter at 9 inches from breech .612/.612 inch; wall thickness at 9 inches from breech .044/.044 inch. Includes a cloth covered takedown case with two nickel snap caps, and leather straps for the case.

Very fine. 90% factory quality refurbished blue finish remains with some light handling marks and mild forearm wear on the barrels. The receiver has a slight plum cast to the blue, wear along the lower edges, and some light surface scratches. The wood is fine with attractive figure, a small repaired chip on the back right of the forearm, scattered small dings, and some finish loss on the buttstock around the grip and comb consistent with usage. Mechanically excellent. The extra barrel set is excellent with light handling marks. The case is excellent.