Manufactured in 1911. The chart on page 309 of "The Parker Story" by Gunther, Mullins, Parker, Price and Cote lists 99 BHE grade shotguns manufactured with 32 inch Acme steel barrel in 12 gauge chambering. "Parker Gun Identification and Serialization" verifies the grade, gauge, barrel quality and length, stock, and ejectors. Dual bead sights on the matte concave rib marked "PARKER BROS. MAKERS. MERIDEN, CONN. ACME STEEL", 2 5/8 inch chambers, automatic ejectors, standard markings on the flats, and full chokes. The receiver features standard B grade engraving with detailed hunting dogs on the sides, two running deer on the underside, and the balance covered in fine, tight scroll engraving. With single selective trigger and automatic sliding tang safety. Checkered splinter forearm with engraved fittings and pistol grip stock with fancy fleur-de-lis carved accents, checkered flats, gold grip cap inscribed "T.J. Donald/Felicity Ohio/1911", and solid rubber recoil pad. Barrel and stock measurements are: bore diameter at 9 inches from breech R-.731/L-.730 inch; bore constriction R-.038(full)/L-.037(full); minimum wall thickness R-.030/L-.030 inch; drop at comb 1 5/8 inches; drop at heel 2 5/8 inches; length of pull 14 1/8 inches; cast-off.

Very fine as professionally restored with 98% of the deep blue finish remaining, some small dings, two small professionally installed screws on top of the rib just forward of the breech, and clear markings. The receiver has 98% of the dark refurbished case colors with detailed engraving, light handling marks, and clear markings. The refinished wood is also very fine with attractive grain, some small dings, and added recoil pad. Mechanically excellent.