This is an excellent WWII production U.S. Army contract Stevens Model 620 trench shotgun. This is highly desirable and highly sought US WWII Military trench shotgun. This one was the later improved version of the original 520 Trench shotguns that had the redesigned "rounded back" receiver, similar to the Model 12 trench shotguns, making this a much stronger and safer trench shotgun. This model was used by both the US Army and Marines during WWII, Korea and Vietnam. The barrel has the three-line factory address/markings, and a single "P" firing proof over a small Ordnance Shell and Flame acceptance proof is at the breech. The left of the barrel side is marked: "PROOF TESTED-12 GAUGE/-2 3/4 INCH CHAMBER-". The barrel correctly gauges as a cylinder bore at the muzzle. The barrel has the correct WWII Stevens six-hole heat shield/bayonet lug that has the correct purplish tint to the metal due to its alloy construction, with the capital "S" stamped on the left side of the bayonet lug. The left side of the receiver is stamped with a "P" firing proof over the Ordnance Corp Shell and Flame proof followed by "MODEL 620" with the "U.S." farther back on the receiver. It is fitted with a walnut pump handle and buttstock with a black plastic buttplate. There is a single bale type sling swivel attached to the bayonet lug and another one correctly mounted on the lower toe area of the stock.

Excellent with 90% plus of the original blue finish overall with light edge and high spot wear overall with some light thinning on the front left sides of the receiver with thinning on the magazine tube from where the action was cycled. The buttstock and pump handle are both in near excellent condition with a nice original dark oil finished walnut with light handling marks on the right side of the pump handle, and the lower rear sides of the buttstock by the sling swivel and in front of the buttplate and also around the very edges of the pistol grip. An excellent condition World War II Stevens model 620 Trench shotgun.