Blue, Bohler steel, vent rib barrels with white bead front and steel bead mid sights, 2 3/4 inch chambers with automatic ejectors, fixed improved cylinder/modified chokes (marked "F/IM") and standard proofs and matching numbers on the flat. The blue receiver features full coverage fine foliate engraving with punch dot backgrounds surrounding scenes of semi-relief, gold inlaid trap shooters on either side, gold inlaid crown and gold inlaid maker and model markings on the underside, and a gold inlaid American Trap Association logo. The trigger guard and tangs are engraved to match with gold wire inlaid borders. Single gold washed trigger with selector, and sliding manual tang safety. Skip-line checkered forearm with engraved and gold inlaid fittings, and pistol grip Monte Carlo stock with plastic grip cap, and solid Decelerator recoil pad. The included single barrel is numbered to the gun with matching engraving and gold at the breech, 2 3/4 inch chamber, dual bead sights, and full choke. With a leather bound Outre takedown case fitted for the set and set of nickel snap caps. Bore and stock measurements with barrel set #1(U/O): chambers proved and measured at 70mm (2 3/4"); bores 9 inches from the breech measuring at .732/.733; chokes measured .007/.023; drop at comb 1 1/2 inches; drop at back of comb; 1 3/8 inches; drop at heel 2 3/16 inches; length of pull 14 inches; weight 8 lbs. 0 oz. Bore measurements with barrel #2: chamber proved and measured at 70mm (2 3/4"); bore 9 inches from the breech measured at .744; choke measured .032