This C.S. Pettengill double-action, percussion revolver was manufactured by Rodgers, Spencer & Co., of Willow Dale, New York c. 1860. The hammerless, double action revolver has a six-shot cylinder and early "split" loading lever. Total production of the early revolvers with split loading levers is estimated at approximately 250 pieces. The revolver has a blue finish on the barrel, cylinder, frame and trigger guard. The loading lever is blued. The two-piece grips have a high polish piano finish. The top of the frame is marked: "PETTENGILLS/PATENT 1856" in two lines. "RAYMOND & ROBITAILLE/PATENTED 1858" is stamped in two lines on the bottom of the frame ahead of the trigger guard. The serial number is stamped on the inside of the trigger guard, bottom of the barrel and loading lever spring, top of the loading lever, side of the cylinder, butt of the frame and on the inside of the two-piece wooden grips. All of the visible serial numbers match.

Fine. The revolver is all original and retains 60% plus of the bright original blue finish. Most of the high polish blue finish is present on the barrel. The finish on the frame and trigger guard has flaked leaving a good-looking silver-gray patina with traces of blue in protected areas. The cylinder has 70% of the blue finish. Nearly all of the muted case colors are present on the loading lever. The grips are very good and retain 90% of the original piano finish. The markings and serial numbers are clear. Mechanically excellent. This is a very fine example of a very limited production, early style, C.S. Pettengill Belt Model Revolver.