Blued Excelsior steel barrels with red fiber optic front sight on the vent rib with gold inlaid "1" at the breech, 2000 dated proofs, chambers marked 2 3/4" with ejectors, chokes marked improved modified/full, a band of wavy line engraving at the front of the chamber and at the breech, and importer marking under the forearm. Blued action with "P. Beretta" inlaid in gold on either side as well as Beretta's trident logo on the underside above "DT10/Trident", carved fences, gold inlaid "1" on the trigger guard, crossbolt, and manual tang safety. Mounted in a magnificently contrasted, checkered walnut forend and pistol grip stock with gold inlaid "1" on the forend latch and "MG" on the bottom of the buttstock, and Decelerator buttpad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .726/.726 inches; choke constriction .031/.041 inches; minimum wall thickness .038/.041 inches; 1 5/16 inch drop at comb; 1 7/16 inch drop at heel; 14 5/16 inch length of pull; weight 8 lbs. 2 oz.

Excellent, retaining 99% original blue finish with limited handling marks. Wood is very fine with scattered dings and scratches and crisp checkering. Mechanically excellent.

As "A" with "2" in place of "1". Barrel and stock measurements (U/O): bore diameter nine inches from the breech .726/.726 inches; choke constriction .031/.040 inches; minimum wall thickness .039/.041 inches; 1 5/16 inch drop at comb; 1 7/16 inch drop at heel; 14 3/8 inch length of pull; weight 8 lbs 2 oz.

Excellent, retaining 99% original blue finish with limited handling marks. Wood is very fine with scattered dings and scratches and crisp checkering. Mechanically excellent.