NC - FINE- All original finish 90% - 94% or better, some dings in wood wear commensurable with percent of finish. In working order.

Top break barrel with checkered brass grips and a large satin gray trigger guard.

NB - EXCELLENT- near new condition 95% - 98%, used but little, no noticeable marring of wood or metal, bluing near perfect (some wear at muzzle or sharp edges can be expected).

Three inch long unmarked pen gun with a blued finish. The hammer is pulled back at the rear by pulling on the end cap and released by pushing a polished steel button on the side. The end of the gun is threaded with a 2 inch long polished steel barrel tube attached.

NB - EXCELLENT- near new condition 95% - 98%, used but little, no noticeable marring of wood or metal, bluing near perfect (some wear at muzzle or sharp edges can be expected).

Four inch long spring loaded pen gun designed to shoot tear gas. The end of the pen at the firing pin is threaded to accept tear gas cartridges. The hammer is pulled back with a checkered thumb piece on the exterior of the pen.

Manufactured in 1925 as a prototype tear gas gun. It is a two piece tube that measured 5-1/4 inch long and can be unscrewed at the firing pin. The hammer is pulled back at the rear with a small button on the side releasing it.

NB - EXCELLENT- near new condition 95% - 98%, used but little, no noticeable marring of wood or metal, bluing near perfect (some wear at muzzle or sharp edges can be expected).

Five inch long steel tube with a firing pin and thumb trigger piece. The end is threaded so that a cartridge of tear gas can be loaded onto it and fired with the pen. Complete with small metal swivel and green wrist band.