This is an example of a Winchester Skeet Grade two barrel set shotgun. The first barrels are 28 inches with a red bead front and steel mid bead sight, 2 3/4 inch chambers with chokes marked "WS-1" and "WS-2" with ejectors. The second barrels are 30 inches with a red bead front and steel mid bead sight, choked modified/full and 3 inch chambers with ejectors. The left rear of the 28 inch barrels are marked "WINCHESTER - 12 GAUGE/2 3/4 CHAM." and the bottom receiver trigger plate is marked "SKEET" directly ahead of the trigger guard. Winchester proof marks on the barrels, matching serial numbers and two Winchester oval proofs on the barrel flats and a Winchester oval proof on the right side of the water table and the three line "Made in U.S.A. Model 21", address marking on the left side. Single trigger with selector, tang mounted safety with gold "SAFE" and mounted with a nicely figured checkered walnut forearm and pistol grip stock with a vented Mershon recoil pad and Winchester grip cap. Length of pull is 13 1/2 inches. With spare parts and leather takedown case with "V.D.S" on the side.

Excellent with 90% of the original finish, most of the wear is on the bottom of the receiver and knuckle from usage. Some finish wear on the muzzle and rib. The wood has a hairline crack in the forearm between the knuckle and release mechanism. There is also a small chip missing next to the lower tang on the otherwise excellent stock. The leather case is very good with some scuffs.