This is a very fine example of a WWII German MP-40 submachine gun. Typically the MP-40s were called a "Schmeisser"; however, they are actually a "Machine Pistole" which derives from the Germans use of "MP" in their model numbers. They used many wartime stampings combined with limited machined parts to reduce manufacturing time and reduce cost. They were produced by three factories: Erma Werke, Haenel and Steyr, with this example produced by the Haenel factory in 1942. The rear receiver end cap is stamped with: "MP40/fxo 42/7938o cos". The left side of the receiver tube, barrel nut and barrel are stamped with serial number "7938o" and with the appropriate "WaA37" and WaA44" Waffenamt proofs. Additionally, the other smaller parts are correctly stamped with serial numbers "7938" or "938" as appropriate. It has the traditional dark red bakelite grips and lower receiver cover. This MP-40 is complete with one original WWII "MP38 U. 40" marked magazine that is proofed on the back side with a maker's code of "kur 43" over two "WaA815" Waffenamt proofs.

Very fine with 70% plus of the original blued finish overall with edge and high spot wear overall with a the balance a mixed brown patina finish. The trigger housing cover and grip panels are all in fine condition showing a nice original color with light handling marks and pressure dents on the sides in some areas. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.