The included Connecticut Shotgun Manufacturing letter states that this Model 21 was obtained by Connecticut Shotgun Manufacturing from the liquidators of U.S. Repeating Arms in New Haven, CT. The letter further confirms the configuration of the gun itself. Single red bead sight on the matte rib, standard markings on the left chamber, Winchester "WP" proofs on the flats, 2 3/4 inch chambers with ejectors, improved cylinder/modified chokes, and jeweled flats. The receiver is a flat side round frame with lightening cuts in the water table, single gold washed trigger with selector, and tang mounted thumb safety with gold inlaid "SAFE" marking. With AAA fancy American black walnut checkered beavertail forearm with ebony tip insert and pistol grip stock with Winchester hard rubber grip cap, gold initial oval, and checkered bare butt. Barrel and stock measurements are: bore diameter at 9 inches from breech.547/.548 inch; minimum wall thickness .031/.031 inch; drop at comb 1 3/8 inches; drop at heel 2 inches; length of pull 14 1/4 inches. With leather bound takedown case with reproduction Winchester interior label, two nickel snap caps, and canvas and leather case cover. This is a Winchester manufactured Model 21 finished by Connecticut Shotgun Manufacturing Company.

Excellent overall. 99% original blue finish remains with only light handling marks and sharp checkering on the nicely figured wood. Mechanically excellent. Case is excellent with some light storage marks.