Dual bead sights on the raised matte rib, 2 3/4 inch chambers, ejectors, standard markings, light engraving at the breech, and full/full chokes. Engraved receiver and lock plates with game bird scenes of a duck on the right and a pair of grouse on the left. The trigger plate is marked for a Hunter One Trigger, but it is fitted with a Miller brand single selective trigger. Checkered beavertail forearm and pistol grip stock with checkered hard rubber grip cap and vented Hawkins recoil pad. Barrel and stock measurements are: bore diameter at 9 inches from breech .725/.725 inch; minimum wall thickness .033/.033 inch; drop at comb 1 3/8 inches; drop at heel 2 5/8 inches; length of pull 14 3/4 inches.

Fine as refinished. 85% of the blue finish remains with some edge wear, surface scratches, evidence of light pitting under the blue, and evidence of the central rib being re-soldered. The receiver has 50% original muted case colors with a mottled brown/gray patina on the balance, some spotting, and some small dents. The revarnished wood has crisp freshened checkering, visible cracks at the left side of the wrist, and small dings throughout. Mechanically very good.