Skip to main content
Rock Island Auction Company
AuctionsConsignmentLatestFAQAbout us
Log InCreate Account
Rock Island Auction CompanyRock Island Auction Company
Contact us
1-309-797-15001-800-238-8022[email protected]
Locations
Bedford, TX
3600 Harwood RoadBedford, Texas 76021, USA
Rock Island, IL
7819 42nd Street WestRock Island, Illinois 61201, USA
Hours
Monday - Friday8:00 a.m. - 5:00 p.m.
Navigation
AuctionsConsignmentLatestFAQAbout usAccount
More Info
Terms & ConditionsPrivacy PolicyJob postings & CareersOrder a catalogContact
Social media
© 2025 Rock Island Auction Company. RIAC believes that this website is accessible to the widest possible audience pursuant to the guidelines of the Americans with Disability Act. Click here for more information.
Healthcare Transparency in Coverage.
Disconnected
Unable to connect to live update server, attempting reconnection. If this persists, please try refreshing your browser.
Disconnected state indicated by at top of page. If you cannot see this icon, you are connected.
Rock Island Auction Company
Hello.
Please Log In, or .

Home
Auctions
Consignment
Latest
FAQ
About us

  • /Auctions...
  • /Premier Firearms Auction #4090

Premier Firearms Auction #4090

December 08, 2023 to December 10, 2023
This auction has ended.
Log In to download catalog
Log In to download catalog
  • /Auctions...
  • /Premier Firearms Auction #4090

Premier Firearms Auction #4090

December 08, 2023 to December 10, 2023
This auction has ended.
Log In to download catalog
Log In to download catalog
Auction Time Summary
Preview DayThursday, Dec 7th10:00 AM - 6:00 PM
SESSION IFriday, Dec 8th10 AMLots 1 through 722
SESSION IISaturday, Dec 9th10 AMLots 1000 through 1751
SESSION IIISunday, Dec 10th10 AMLots 3000 through 3777

Phone: 1-309-797-1500

Toll-Free: 1-800-238-8022

Email: [email protected]

Rock Island Auction Company - Bedford

3600 East Harwood Road

Bedford, TX, 76021, USA

Page 1 of 45
Showing 1-50 of 2,250 results
Lot 1
Antique Winchester Model 1886 Rifle in .45-90 W.C.F.
Manufactured in 1895, with the desirable early casehardened receiver found only on Model 1886 rifles manufactured prior to 1902. As the spiritual successor to the Model 1876, these rifles were highly prized in the American west for their stunning firepower and rugged dependability, especially in .45-90 caliber, which was more than capable of stopping even the most dangerous North American game. The top of the barrel is marked with the two-line address and desirable caliber marking at the breech. The model designation is on the upper tang, with the serial number and two-line patent dates on the lower tang. It is fitted with a German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. The included factory letter confirms the current configuration as well as receipt at the warehouse on 27 November 1895 and shipment on 2 October 1896 in order number 20572.
Documentation
Antique
Caliber / Gauge: 45-90 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 2
Three-Digit Serial Number 946 Winchester Deluxe Model 1895 Rifle
Manufactured in 1896, the second year of production, as one of the first 5,000 manufactured with the flat sided receiver. The included factory letter lists the rifle as manufactured in 1896 with a checkered pistol grip stock when received at the warehouse on 27 March 1897 and shipped the same day. The pistol grip stock may be a factory notation error as the rifle has a straight lower tang. The top of the barrel is marked with the two-line address and caliber marking at the breech. The upper tang has the two-line trademark/model, serial number on the lower tang, and two-line patent dates are on the trigger plate. "3852" is marked on the butt of the stock and "1111/C" is marked inside the buttplate along with an illegible hand marking in white. It is fitted with a pinned German silver blade front sight and an elevation adjustable buckhorn rear sight. It is mounted with a finely figured, H-pattern checkered, Schnabel tip forearm with ebony insert and a checkered straight grip stock with a smooth shotgun buttplate. The consistent wear between the metal and wood on this rifle and the extended period of time between manufacture and receipt at the warehouse lead the writer to believe that it left the factory in this configuration without the ledger being modified, and has been paired with this wood ever since. It was not uncommon for special orders to be modified to meet demands before leaving the Winchester factory, and this rifle appears to be an example of just that.
Documentation
Antique
Caliber / Gauge: 30-40 Krag
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 3
Inscribed Winchester Deluxe First Model 1876 "Open Top" Rifle
Offered here is a highly sought after deluxe Winchester "Open Top" First Model 1876 Rifle with several special order features such as a heavy octagon barrel, set trigger, engraved inscription, and deluxe pistol grip stock. Adding to its historical significance is the fact that the rifle is one of three documented factory inscribed consecutively serialized Model 1876s shipped on March 9, 1878, to order number 11257. As stated in the accompanying factory letter, this rifle was received in the warehouse on March 2, 1878, and shipped with four other arms on March 9 with a heavy octagon barrel, set trigger, checkered pistol grip stock, buckhorn rear sight, and casehardened receiver engraved with the name "Geo. E. Brown." The included copy of the factory ledger indicates that two other Model 1876s in the same March 9, 1878, shipment to order number 11257 were also engraved with a name. No. 740 featured the name W.S. Williams. No. 741 had the name Jack W. Swilling. This rifle, no. 742, has the name "Geo. E. Brown" script engraved on the left side plate. W.S. Williams has yet to be identified. While William S. Williams is a noted frontiersman, he died in 1849, nearly 20 years after this rifle was shipped. An early pioneer in the Arizona Territory, John W. "Jack" Swilling is often credited as one of the original founders of the city of Phoenix. During the Civil War Swilling served with both the Confederate States Army as a minuteman and the United States Army as a civilian aid. When Arizona officially withdrew from the Union in 1861, Swilling was serving with a militia company named the Arizona Guards. The guard was absorbed into the Confederate Army. In May 1862 Union forces captured Tucson and soon after Swilling became a civilian employee of the U.S. Army. Throughout his life Swilling worked a number of jobs. He was an owner of a mine and saloon. He was a builder of a canal, a farmer, and a rancher. When the rifle was shipped in March 1878 Swilling's health was failing and in August he wrongfully arrested and imprisoned for a crime he did not commit. His time in prison contributed to his decline in health and eventually led to his death soon after he was released. The true culprits of the crime were discovered after his death. Whether or not rifle no. 741 was ordered by the Arizona pioneer is not known. George E. Brown remains unknown at this time; however, the George E. Brown & Co. was a well known Aurora, Illinois, cattle and horse breeder of the period. This three digit serial number Model 1876 rifle has the seldom encountered open top frame whereas the later Model 1876s had dust covers. Approximately 3,000 were produced out of the total of 63,871 manufactured between 1876 and 1897. The rifle is fitted with globe front sight, an elevation adjustable buckhorn rear sight, an tang peep sight with 5 inch staff. The rifle correctly lacks a caliber designation as early production Model 1876s were offered in only in .45-75 WCF. The top barrel flat is stamped with the two-line Winchester address/King's patent dates marking ahead of the rear sight. The serial number is in script font just below the lever catch on the lower tang. The action is equipped with a documented special order single set trigger. The checkered forearm and pistol grip stock are deluxe walnut. The pistol grip has an ebony insert and the stock is fitted with a trapdoor crescent buttplate (cleaning rod not included). The left side of the lower tang has the assembly number "128," which is repeated on the stock inlet and buttplate.
Documentation
Antique
Caliber / Gauge: 45-75
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 4
Winchester Model 1866 Lever Action Rifle
Manufactured in 1880 as a Fourth Model 1866 rifle with the gradually sloped receiver in front of the hammer and the serial number on the bottom of the lower tang in script numerals. These rifles are one of the most iconic weapons of the American West with this example having made it to England, proving that the Model 1866 had international appeal. The direct descendant of the iconic Henry rifle, they bridged the gap between the Henry and the Winchester Model 1873. The Model 1866 was highly prized on the western frontier for its rapid firepower in comparison to many single shot arms of the time, and was used by people in all walks of life. The top of the barrel is marked with the standard two-line Winchester address and King's patent marking. London proofs are stamped on the left side of the barrel and receiver at the breech. The cartridge elevator is marked "44 CAL." It is fitted with a German silver blade front sight and a later production replacement elevation adjustable notch rear sight. It is mounted with a smooth forearm and straight grip stock with an iron trapdoor crescent buttplate (cleaning rod not included).
Antique
Caliber / Gauge: 44 RF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 5
Engraved Winchester Model 1886 Lightweight Takedown Rifle
The included factory letter states the rifle was received in the warehouse on August 17, 1915, and shipped the same day on order number 633085 to Abercrombie & Fitch Co. of New York City. Rarely do we catalog Winchesters where the factory ledger records the recipient. Ledger entries generally only include the in warehouse date and ship date with the order number. The factory letter also states the rifle was in takedown configuration with a round barrel in .33 WCF caliber, checkered pistol grip stock, half magazine, shotgun butt, and oil finish when it shipped in 1915. The rifle was subsequently embellished by master engraver Arnold Griebel. A previous owner explains when he obtained the rifle and how it came to be engraved: "The deluxe 1886 Winchester s.n. 153353 I purchased in the early 1950s. It has a beautiful walnut stock, pistol grip, shotgun butt, and fine checkering. My wife's uncle worked for a small company that dealt in precious metals. Arnold Griebel would buy gold from him to use for inlays on guns. This is how I met Arnold. He was somewhat selective who he would do work for. After several meetings we decided what would be appropriate to put on the rifle. Arnold worked on a small table in his kitchen on the northwest side of Chicago...He did the work about 1960 and I was more than pleased with it." Born in Germany Griebel came to the U.S. in 1928 and was employed as a die engraver and later as a free lance gun engraver in Chicago. He died on September 13, 1970, at the age of 79. The receiver features fine panels of floral scrollwork on stippled background. The sides of the receiver are decorated with detailed game scenes: a buffalo in a mountain scene on the left side and a buck in a forest scene on the right side. Griebel signed his work on top of the chamber. The rifle is fitted with a beaded blade Lyman front sight, an elevation adjustable rear sight, standard Winchester markings including factory oval proofs, and checkered deluxe walnut forearm and pistol grip stock with hard rubber Winchester grip cap and checkered steel shotgun buttplate. The left side of the lower tang is stamped "416." The assembly number "416" is marked in pencil on the stock inlet. "416" is also repeated on butt of the stock and buttplate.
Documentation
Curio and Relic
Caliber / Gauge: 33 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 6
Union Metallic Cartridge Co. Cartridge Display Bullet Board
Cartridge boards such as this were a complimentary advertisement provided to sporting goods stores by cartridge manufacturers to hang in their shops, giving consumers a physical representation of the wide range of cartridges they provided. One of these boards is clearly shown hanging in the well-known photograph of the interior of J.P. Lower & Sons' shop in Denver, and other examples would have hung in other gun shops around the country as promotional items distributed by the Union Metallic Cartridge Co. in the late 19th century. These cartridge display boards, especially this excellent example, naturally make eye-catching display pieces in gun rooms, gun shops, homes, and businesses. Being one of the largest American cartridge manufacturers, Union Metallic Cartridge Co. would have wanted boards such as this hanging in as many retail locations as possible to compete with the likes of Winchester. This impressive board includes cartridges ranging from the tiny BB cap up to the massive 1 inch Gatling. Centered around a central diamond shaped image depicting a herd of deer and the "U.M.C." logo, a number of primers, caps, wads, and cut away brass shotgun shells join the myriad of rifle and revolver rounds. The frame features the attractive U.M.C. trademark and Union Metallic Cartridge Co. carved banners at the top and bottom respectively. It measures approximately 41x54 1/2 inches overall.
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 7
Factory Engraved New Haven Arms Volcanic Lever Action Carbine
This is a solid representative example of one of the approximately 1,000 carbines for all three barrel lengths (16 1/2, 21 and 25 inches) manufactured by Oliver Winchester's New Haven Arms Company between 1857 and 1860. The Volcanic lever action firearms are historically significant and represent an important step in the development of American repeating firearms and self-contained cartridges. The lever action and integral spring-loaded magazine of these pistols and carbines served as the basic design for the Henry rifle, and Oliver Winchester's investment in the Volcanic Repeating Arms Company eventually led to the establishment of the Winchester Repeating Arms Company and the Model 1866, 1873, and 1876 rifles. The Volcanic repeaters were mainly hampered by their underpowered and often problematic ammunition. After these New Haven pistols, lever action designs focused on rifles and carbines. The barrel has a blade front sight and is marked "NEW HAVEN CONN PATENT FEB.14.1854." This barrel marking was adopted by the New Haven Arms Company after Oliver Winchester reorganized the Volcanic Repeating Arms Company in April 1857. The receiver has a dovetail mounted sporting type rear sight featuring a thumb wheel elevator and niter blue finish. A factory floral scroll engraving is featured on the sides of the receiver, and the engraving extends to the upper tang. The left side of the lower tang is marked "68." "68" is repeated on both upper tang screws, one buttplate screw, the butt of the stock, and the buttplate. The cartridge follower is a crudely made period replacement. Provenance: The Felix A. Bedlan Collection
Antique
Caliber / Gauge: 41 Volcanic
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 8
Engraved Smith & Wesson Large Frame No. 2 Type I Pistol
Smith & Wesson manufactured approximately 500 large frame Volcanic pistols from 1854-1855. Surviving examples are scarce and very desirable in any condition. This factory engraved, early production Smith & Wesson Large Frame No.2 lever action pistol was manufactured by Horace Smith and Daniel B. Wesson in Norwich, Connecticut, c. 1854. This large frame pistol has the distinctive Type I features which include: an uncrowned muzzle, flat T-bar spring, frame with hump behind the lever, loading lever with finger spur and single screw cartridge carrier spring. The eight-inch, .41 caliber, part-round/part-octagon barrel has an integral 10-shot magazine, a "pinched" blade front sight blade, and round magazine follower. The top barrel flat is roll-stamped with the four-line legend: "SMITH &WESSON/NORWICH. CT./CAST-STEEL/PATENT." The top of the frame has a screw-fastened notch rear sight. The hammer has fine hand-knurling on the spur. The receiver sides, top, back strap, sideplates, and back of the hammer are decorated with the well-executed, open scroll engraving that was standard on S&W Volcanic pistols. The matching serial number "164" is stamped on the back of the rear sight and on the butt under the left grip and lightly written inside the rosewood grips.
Antique
Caliber / Gauge: 41 Volcanic
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 9
Engraved Smith & Wesson Volcanic No. 1 Lever Action Pistol
The bottom of the frame is shown on page 34 of "Volcanic Firearms: Predecessor to the Winchester Rifle" by Lewis & Rutter as an example of a later frame without a screw hole. It is noted as from the Donovan Williamson collection. It is one of approximately 1,200 No. 1 pistols that were manufactured by Horace Smith and Daniel B. Wesson in Norwich, Connecticut, in 1854 and 1855. They are historically significant pieces for both Smith & Wesson and Winchester collectors. The barrel has "CAST-STEEL" (right), "SMITH & WESSON/NORWICH CT" (top) and "PATENT/FEB. 14. 1854." (left). Factory floral and scroll engraving is featured on the frame, side plates, and hammer. The left side of the butt has "I 316," the right side of the lever has "316" and "I," and some of the small parts and both grip panels are stamped with "316". The lever is the later style without a spur on the bottom. Provenance: The Donovan Williamson Collection; Property of a Gentleman
Antique
Caliber / Gauge: 31 Volcanic
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 10
Winchester Model 1866 Lever Action Saddle Ring Carbine
This is an extraordinary example of a Fourth Model 1866 carbine that was manufactured by the Winchester Repeating Arms Co. in 1891. The included factory letter confirms the carbines configurations, and lists it as being received in the warehouse on May 07, 1891. Changed to Rim on August 18, 1898, (it began as centerfire per the factory letter). Shipped from the warehouse on August 18, 1898, order number 2603, received in the warehouse on August 18, 1899. Then shipped from the warehouse on September 26, 1901, order number 113108. The carbine has the distinctive brass receiver with blue 20-inch barrel, 13-shot magazine and barrel bands. The hammer, lever, trigger and carbine style iron buttplate are color casehardened. The loading gate and bolt are niter blue. The stock and forearm are oil finished straight grain American walnut. The carbine has the Fourth Model features which include: receiver profile with less drop ahead of the hammer than earlier models, iron buttplate with sliding brass trapdoor and serial number stamped on the lower tang between the lever latch and tang screw. A staple mounted saddle ring is located on the left side of the receiver. The upper tang is factory drilled and tapped for a rear sight. The barrel has a block mounted steel front sight located behind the upper barrel band and late sporting style folding leaf rear sight marked "1873" and graduated to 900 yards. The magazine has the late style screw fastened cap. The hammer has forged bordered knurling on the spur. The butt trap contains a four piece jointed steel cleaning rod with brass tip. The top of the barrel is roll stamped with the second style legend "WINCHESTER'S-REPEATING-ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860." ahead of the rear sight and the late "44 B" caliber marking between the rear sight and the receiver. "44 CAL" is stamped in script letters on the bottom of the cartridge elevator. The serial number is stamped in script numerals on the lower receiver tang. Provenance: The Joe Marlin Hilliard Collection
Documentation
Antique
Caliber / Gauge: 44 RF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 11
Winchester Deluxe Model 1876 Lever Action Rifle
The Model 1876 was the first Winchester lever action rifle offered in calibers truly suitable for hunting large and dangerous game. The larger caliber Model 1876 was popular among those in the West who believed .44-40 wasn't quite enough stopping power for whatever they might encounter. Deluxe variations of the Model 1876 are always in demand in any condition. With only 63,871 rifles and carbines manufactured between 1876 and 1897, surviving examples of the Model 1876 rifle are scarce. Generally being viewed as a working gun, these rifles in deluxe configuration or with special order features are especially rare. This deluxe Model 1876 has all the character of a rifle that has spent a lifetime on the frontier, including the shortened barrel and magazine tube to meet the demands of the day. It is easy to imagine this "short rifle" carried on horseback out west, as likely was the case. The rifle is stamped with a cattle brand style marking, an iconic feature of the American West, on the right side of the butt of an "A" over a bar over "Y." Per the consignor, this rifle was part of the Cody Firearms Museum and was identified as from the "A Bar Yellowstone Ranch that records show was in operation through the 1870s and 1880s." Further information on this ranch could not be found. The included factory letter lists the rifle in .45-60 caliber with an octagon barrel, set trigger, checkered pistol grip stock and casehardened receiver when received at the warehouse on March 28, 1884, and shipped on April 14. This rifle was manufactured as a Third Model with integral dust cover rail and a dust cover with grip serrations at the rear. The top barrel flat is marked with the two-line address/King's patent marking and the caliber marking at the breech. The caliber is again marked on the bottom of the cartridge elevator. The upper tang is marked with the model designation, and the serial number is on the lower tang. The XX deluxe walnut forearm and pistol grip stock have factory "H" pattern checkering. The buttstock has an ebony insert in the grip area and a trapdoor crescent buttplate (cleaning rod not included). The left side of the lower tang is marked "1838 S XX." The assembly number "1838" on the stock inlet and buttplate.
Documentation
Antique
Caliber / Gauge: 45-60
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 12
Winchester Model 1894 Trapper's Carbine with 16 Inch Barrel
Manufactured in 1920 with Winchester factory oval proofs on the barrel and receiver at the breech. These carbines were widely valued in the American West well into the 20th century by farmers and ranchers due to their portable firepower. The left side of the barrel has the two-line address/patent date, two-line nickel steel marking, and the caliber marking. The top of the receiver ring is period, deeply hand filed with a conjoined "HF" that has the look of a cattle brand. The upper tang is marked with the three-line model and trademark information, and the serial number is on the bottom of the receiver. It is fitted with a pinned blade front sight, folding ladder rear sight, and a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a carbine buttplate. Provenance: The Brandhorst Collection
Curio and Relic
Caliber / Gauge: 30 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 13
Antique Winchester First Model 1873 Lever Action Rifle
The Model 1873 is one of the most famous of all American firearms and has been popularly known as "the Gun that Won the West" due to its popularity with pioneers. The rifle has the very desirable late first model dust cover with integral "thumb print" that rides in grooves mortised directly into the frame. Only about 31,000 First Models were manufactured. The top flat of the barrel is marked with the two-line address and King's patent marking and correctly lacks a caliber marking. The upper tang is marked with the model designation and the serial number is on the lower tang. It is equipped with a replacement beaded blade pattern front, an elevation adjustable notch rear sight, and a special order single set trigger. It is mounted with a smooth forearm and straight grip stock with a trapdoor crescent buttplate containing an included four-piece cleaning rod.
Antique
Caliber / Gauge: 44 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 14
Antique Black Powder Colt Single Action Army Revolver
The Colt Single Action Army was one of the most popular handguns in late 19th century and is easily the most iconic and most thoroughly associated with the American West. This example was manufactured in 1881, in a time when much of the West remained untamed, and it certainly has the classic look of an authentic western working gun. The included factory letter confirms the current configuration (grips and barrel length not listed, as was typical for standard guns) as well as shipment to J.P Moores & Sons on 7 September 1881. J.P Moores was one of Colt's many large distributors, a first stop for thousands of firearms that were destined to head farther west. The top of the barrel has the standard one-line address on top. The left of the frame has the three-line patent dates, and the "45CAL" caliber marking is on the left of the trigger guard. The matching serial number is marked on the bottom of the frame, trigger guard, back strap. The assembly number "6255" is marked inside the loading gate. It is fitted with blade and groove sights and a smooth walnut one piece grip.
Documentation
Antique
Caliber / Gauge: 45 Long Colt
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 15
Factory Engraved New Haven Arms Co. Henry Lever Action Rifle
Factory engraved Henry rifles are among the most desirable of all antique firearms thanks to their important place in the development of lever action firearms and the Winchester Repeating Arms Co. as well as their place in the history of the American Civil War, the West, and popular culture. The factory engraved rifles represent only a small percentage of the already scarce original Henry rifles and are highly sought after by collectors, especially high condition examples like this one. This beautiful rifle was manufactured in 1864 and featured the classic factory scroll and floral engraving patterns with beaded backgrounds of Samuel J. Hoggson; however, rather than the more common deer or dog motifs on the left side plate, it features a nicely detailed reposed stylish lion which may have been engraved specially for someone of English ancestry. This unusual motif plus the rifle's high condition certainly places it in the upper echelon of Henry rifles. The engraving also extends to the tang of the buttplate which has the point heel standard on later production Henry rifles. Additional later production features include: a flat back German silver blade front sight, notch and ladder rear sight with stop screw below the 900 yard top notch, no second rear sight dovetail on the frame, all serifed letters in the two-line address and patent marking on the barrel, larger diameter magazine follower and beveled follower cut, and sling mounts on the left side of the barrel and stock. The serial number is marked on the top of the barrel at the breech, and the "W" inspection mark of Oliver F. Winchester is stamped between the lever latch and rear screw on the lower tang. The stock has attractive figure visible in the wrist. Provenance: The Mac McCroskie Collection
Antique
Caliber / Gauge: 44 Henry RF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 16
Winchester Model 1895 Lever Action Saddle Ring Carbine
Manufactured in 1917. This World War I era Winchester Model 1895 saddle ring carbine is in excellent condition, having the appearance of just coming off the production line. Its exceptional condition makes it a standout piece of Winchester heritage. Designed by prolific firearms inventor John Browning, the Model 1895 was the first box magazine lever action rifle Winchester manufactured. It was designed to chamber the new high powered smokeless ammunition that ushered in a new era of big game hunting. The carbine is fitted with a pinned blade front sight, folding ladder rear sight with stair step base, and saddle ring on the left side of the receiver. The receiver has the caliber designation ".30/ARMY" above a Winchester factory oval proof on the chamber and the two-line Winchester legend on the left side. The upper tang has the three-line model/trade mark information. It is mounted with a smooth forearm with finger groove and an upper handguard, as well as a smooth straight grip stock with a trapdoor carbine buttplate containing a bore brush.
Curio and Relic
Caliber / Gauge: 30 Army (30-40 Krag)
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 17
Winchester Model 94 Lever Action Saddle Ring Carbine
This is an outstanding, high condition pre-World War II Winchester Model 94 saddle ring carbine as manufactured in 1920. Finding these pre-war examples in near new condition is becoming extremely difficult, and this example is certainly a stunner! The carbine is fitted with a pinned blade front sight and a folding ladder rear sight. A saddle ring is mounted on the left side of the receiver. The left side of the barrel carries the two-line Winchester address/patent dates marking, two-line nickel steel marking, and the caliber designation. A Winchester factory oval proof is stamped on the barrel and receiver at the breech. The upper tang has the three-line Model 94/trade mark information. Mounted with a plain carbine forearm and buttstock.
Curio and Relic
Caliber / Gauge: 30 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 18
Winchester Single "W" Cartridge Display Board
This Winchester Repeating Arms "W" cartridge board was manufactured around the 1890s and measures approximately 38x51 inches including the outer oak frame. These cartridge board advertisements would have been a common sight in sporting goods retailer's shops around the turn of the century, and were an excellent, eye-catching way for Winchester to gain a leg. The cartridges and components represented range from the tiny BB cap to the massive 4 gauge and total over 100 items not counting the individual caps. The most desirable cartridge on the board is the extremely rare 70-150 caliber that was intended for use in the Model 1887 shotgun, but never put into production. The main cartridge display forms a large "W" clearly signifying Winchester, and the background has attractive vignettes of a western hunter on the plains firing a Winchester while using his horse for cover and two hunters armed with Winchesters in a winter scene while the center has a brace of ducks suspended from the "H" trademark. The back has the standard "PRESENTED WITH COMPLIMENTS/OF THE/Winchester Repeating Arms Co./PLEASE HANG IN A PROMINENT PLACE." label.
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 19
Volcanic Repeating Arms 6-Inch "Belt Model" Navy Pistol
The various "Volcanic" pistols and carbines manufactured by Smith & Wesson, then Volcanic Repeating Arms Co., and then followed by the New Haven Arms Co. are historic firearms that represent incremental steps in the evolution of American lever action firearms and ultimately led to the innovative Henry lever action rifle and the Winchester rifles that followed. Production of these firearms connected a whole host of influential figures in 19th century American firearms history, most famously Oliver Winchester, whose investment in the Volcanic Repeating Arms Company in 1855 led to the creation of the New Haven Arms Co. and then the establishment of the historic Winchester Repeating Arms Company. Only around 600 of these Large Frame 6-inch "Belt Model" Navy pistols were manufactured by the Volcanic Repeating Arms Co. in 1855-1857. The pistol has the distinctive "brass" (gunmetal) frame, a 6 inch octagon barrel, integral magazine, and loading lever with finger hole. The barrel has a "pinched" blade front sight. A fixed notch rear sight is mounted in a dovetail near the back of the frame. The top of the barrel is roll-stamped with the lightly stamped legend: "THE VOLCANIC/REPEATING ARMS CO./PATENT NEWHAVEN CONN. FEB. 14. 1854." in three lines. The serial number is stamped on the right side of the loading lever, the left side of the frame underneath the grip, and on the inside of both grips. All of the visible serial numbers match.
Antique
Caliber / Gauge: 41 Volcanic
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 20
New Haven Arms Co. Volcanic No. 1 Lever Action Pocket Pistol
The Volcanic lever action firearms are historically significant American firearms and are key links in the evolutionary tree that led to the Henry lever action rifle and the creation of Winchester Repeating Arms Co. and its innovative lever action rifles popular in the American West. The Volcanic repeaters were mainly hampered by their underpowered and often problematic ammunition but set the stage for further innovation. This is one of only an estimated 850 "No. 1 4 inch Pocket pistols" manufactured by the New Haven Arms Co. of New Haven, Connecticut, in 1857-1862. The pistol has the distinctive octagon barrel with integral six-shot magazine, round finger hole in the lever and flat bottom grips. The pistol is fitted with a pinched blade front sight on the barrel and a notch rear sight at the rear of the frame. The top barrel flat is marked "NEW HAVEN CONN./PATENT FEB. 14. 1854." Both grip panels are numbered to the gun.
Antique
Caliber / Gauge: 31 Volcanic
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 21
Winchester Deluxe "Centennial" Model 1876 Lever Action Rifle
The Winchester Model 1876 Rifle made its public debut in 1876 at the Philadelphia Centennial Exposition where it garnered the title "The Centennial Model" in honor of the Declaration of Independence. By all accounts the Model 1876 was "a revolutionary gun," as legendary Winchester expert George Madis pointed out. Originally chambered in only .45-75 WCF cartridge, the Model 1876 offered a larger caliber for customers, particularly those out West, who believed .44-40 WCF lacked the stopping power for whatever came their way. Only 63,871 were made c. 1876-1898. The model was fairly quickly supplanted by the Model 1886, but the Model 1876 has that classic early Winchester appeal with its side plates, dust cover, toggle link action, and combination of blued and casehardened metal. Surviving examples of the Centennial rifle are scarce, especially those in high condition. Even rarer are deluxe Model 1876s in outstanding condition. The Model 1876 was a "working gun" when a powerful rifle was still highly valued on the wild Western frontier and customers were generally not inclined to spend extra money on deluxe features. Surviving examples display all the character of hard use. This deluxe example, however, bucks the trend and remains in excellent condition, having the appearance of just coming off the production floor. This stellar deluxe Model 1876 is certainly worthy of the finest and most advanced Winchester or lever action collection. The rifle was manufactured in 1882, when a powerful rifle would have still been highly valued on the wild Western Frontier. It has the desirable casehardened, Second Model receiver with the dust cover guide retained with two screws and a dust cover with grip serrations at the rear. Winchester expert George Madis notes that only one out of every nine Model 1876s received a casehardened finish. The rifle is fitted with a dovetail blade front sight and a folding ladder rear sight marked “1876.” The top barrel flat has the two-line Winchester legend ahead of the rear sight and “CAL. 45-60” at the breech. The caliber marking is repeated on the bottom of the cartridge elevator: "45-60." The stock was not removed to check assembly numbers out of respect for the outstanding, rare condition. The forearm and straight grip stock are original factory deluxe grade walnut featuring fine “H” style checkering. The buttstock is fitted with a blued shotgun type steel buttplate. The accompanying factory letter states the rifle was received in the warehouse on March 24, 1882 and shipped the same day and confirms the 26 inch octagon barrel, plain trigger, checkered stock, casehardened frame, and shotgun butt.
Documentation
Antique
Caliber / Gauge: 45-60
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 22
Winchester Model 1892 Lever Action Rifle
Manufactured in 1926, this is an outstanding, near new example of a late production Winchester Model 1892 rifle. There are Winchester factory oval proofs on the barrel and receiver at the breech. The upper left flat of the barrel has the two-line model, trademark, and caliber information. The upper tang is marked with the three-line trademark information, and the serial number is on the bottom of the receiver. It is fitted with a blade front sight and elevation adjustable buckhorn rear sight. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate.
Curio and Relic
Caliber / Gauge: 32 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 23
Winchester Model 94 Saddle Ring Carbine
This is an exceptional, virtually unused example of a Winchester Model 94 Saddle Ring carbine that was manufactured c. 1922. The receiver is roll-stamped with the "MODEL 94" designation adopted around serial number 500,000. The carbine has a full blue finish. The stock and forearm are straight grain, oil finished, American walnut. The 20-inch round barrel has a steel block front sight base with blued blade located behind the upper barrel band and a folding leaf rear sight graduated top "20". A staple-mounted saddle ring is located on the left side of the receiver. The upper receiver tang is factory drilled and tapped. The stock has a carbine style buttplate. The left side of the barrel is roll-stamped with two-line legend: "MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO./NEW HAVEN. CONN. U.S.A. PATENTED AUGUST 21 1894" just below the lower barrel band. "-NICKEL STEEL BARREL-/ESPECIALLY FOR SMOKELESS POWDER" is roll-stamped in two lines on the left side of the barrel below the rear sight followed by the caliber designation: "-.30 W.C.F." Oval Winchester "W/P" proof marks are stamped on the top of the barrel and receiver. The upper receiver tang is roll-stamped: "MODEL 94/-WINCHESTER-/TRADE MARK REG.U.S. PAT. OFF.& FGN." in three lines. The serial number is roll-stamped across the underside of the front of the receiver.
Curio and Relic
Caliber / Gauge: 30 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 24
Glass Winchester Store Display Gun Cabinet
This factory store display cabinet was manufactured in the early 1900s to aid Winchester dealers in displaying their Winchester long guns. There is a brass "Walrus Mfg. Co. Decatur, ILL." manufacturer plaque attached to the bottom. It is constructed of oak, with full length glass panels and a cathedral top with glass panels. The top of door is stamped with the serial number for the cabinet "358". It stands approximately 73 inches in height on four legs with the typical brass feet sheathes present, and each side is approximately 18 inches wide. The inside display height is approximately 45 inches. On the inside is a four sided rack that will hold 20 long guns. All four sides are 5/8 inch thick and are marked "WINCHESTER" in white and black bordered red letters with black lettered "PATENT APPLIED FOR" on a white background below. The bottom of the case and the inner edge of the rack is lined with original green felt.
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 25
Special Order Winchester Model 1873 Rifle
The Model 1873 is one of the most famous of all American firearms and has been popularly known as "the Gun that Won the West" due to its popularity with pioneers. It was often paired with a Colt Single Action Army or other revolver chambered for the popular .44-40 W.C.F. cartridges. This made carrying ammunition for both your rifle and your revolver simple and allowed an individual to be ready to defend themselves against man or beast in a variety of tough situations. Offered here is a high condition special order antique Model 1873. The factory letter states the rifle originally had a plain trigger and octagon barrel when received in the warehouse on December 13, 1883 but returned to the factory and changed to a rifle with round barrel, plain trigger, 1/2 magazine on March 15, 1884, and then returned to the warehouse and shipped on March 15, 1884, with nine others to the order number 11247. The rifle is fitted with a dovetail front sight and a buckhorn elevation adjustable rear sight. The half magazine is a special order feature. The third model receiver has an integral dust cover rail and dust cover with grip serrations at the rear. The rifle correctly lacks a caliber designation. The upper tang is marked "MODEL 1873." The lower tang has the serial number. The forearm and straight grip stock are plain walnut. The buttstock is fitted with a trapdoor buttplate (cleaning rod not included).
Documentation
Antique
Caliber / Gauge: 44-40 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 26
Winchester Model 1876 Lever Action Rifle
Manufactured in 1882, the larger caliber Model 1876 was popular among those in the West who believed .44-40 wasn't quite enough stopping power for whatever they might encounter. This example is a Third Model, with integral dust cover guide and a dust cover with grip serrations at the rear. The barrel is marked with the two-line Winchester address/King's patent marking and the caliber marking at the breech, which is repeated on the bottom of the cartridge elevator. The upper tang is marked with the model designation, and the serial number is on the lower tang. It is fitted with a German silver blade front sight and "1876" marked folding ladder rear sight. It is mounted with a smooth forearm and straight grip stock with a trapdoor crescent buttplate (cleaning rod not included).
Antique
Caliber / Gauge: 45-60 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 27
Three-Digit Serial Number Winchester Model 1895 Flat Side Rifle
Manufactured in 1896, the first year of production, this is a fine example of a "flat side" Model 1895, which is only seen on the approximately first 5,000 made. The top of the barrel is marked with the standard two-line address and the caliber marking "30 U.S." at the breech. The upper tang is marked with the two-line trademark and model designation, early three-digit serial number on the lower tang, and the two-line patent dates on the trigger plate. It is fitted with a pinned German silver blade front sight and an elevation adjustable buckhorn rear sight. It is mounted with a smooth Schnabel tip forearm with ebony insert and a smooth straight grip stock with a crescent buttplate.
Antique
Caliber / Gauge: 30-40 Krag
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 28
Special Order Winchester Deluxe Model 1876 Lever Action Rifle
This is a fine example of a documented, special order, Winchester deluxe Model 1876 lever action rifle with factory letter. The letter lists the features as: "Type: Rifle, Caliber: 40/60, Barrel Type: 1/2 Octagon, Trigger: Plain, Checkered stock with pistol grip, 1/2 Magazine, Shotgun butt" and "Casehardened". The letter states this rifle was shipped from Winchester on June 4, 1886. The rifle has a blued 26-inch barrel with casehardened forearm cap, receiver, hammer, trigger and lever and shotgun buttplate. The dust cover and loading gate have a fire blue finish. The forearm and pistol grip stock are highly figured, fancy grade, walnut with a piano finish and Winchester "Style H" checkering. The bottom of the pistol grip has a horn or ebony inlay. The barrel has a replacement Sheard front sight with 1914 patent date and a sporting style buckhorn rear sight with flat top. A folding graduated peep sight is mounted on the upper receiver tang. The Third Model receiver has an integral dust cover rail and a dust cover with serrated edges. The top of the barrel is roll-stamped: "WINCHESTER'S-REPEATING ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29.1866. OCTOBER 16. 1860." in two lines ahead of the rear sight. "CAL. 40-60" is stamped on the top barrel flat between the rear sight and the receiver. "40-60" is roll-stamped in script numerals across the bottom of the cartridge elevator. The serial number is stamped in small numerals across the lower tang between the lever latch and the rear tang screw.
Documentation
Antique
Caliber / Gauge: 40-60 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 29
Thomas Stuart's One of One Thousand Winchester Model 1873 Rifle
Winchester's lever action rifles, especially the Model 1873, remain among the most iconic and collectible American firearms of all time, and none is more desirable than the exceedingly rare One of One Thousands. James D. Gordon wrote, "To the collector of early Winchesters, the Model 1873 'One of a Thousand' has long been the epitome of desirable guns." If these rifles were the epitome of a desirable guns, this rifle has to be the epitome of the most desirable One of One Thousands. It has everything a collector could want: immense rarity, extremely high condition, exceptional quality, and a documented connection to the Montana frontier starting with its special order by "Mr. Montana" himself, Granville Stuart, followed by its historic factory inscription for his younger brother and fellow pioneer Thomas and publication in several notable collecting books. Winchester only manufactured 132 of these highly sought after rifles as part of a brief sales campaign in the 1870s specifically advertising them to men seeking the most accurate repeating rifles in the world. Many have long since been lost. When Gordon published "Winchesters New Model of 1873: A Tribute" in 1997, only 57 were known to the author. The factory ultimately abandoned the program but not before it gained the attention of some of the pioneers in the West, including Granville Stuart who ordered at least five of the 132 One of One Thousand Model 1873s. He rejected the first two, kept one for himself, ordered our current rifle for his younger brother Thomas, and ordered another for a friend. Granville and Thomas Stuart’s One of One Thousands are the only two Model 1873s deemed by Gordon and Lewis in their respective books to have the “Third Style” barrel inscription that was based specifically on Granville Stuart’s own complaints about the two rifles he rejected, and their "Third Style" rifles are distinct from later versions since their upper left and right barrel flats are not engraved. Thus, this incredible Model 1873 is one of only two One of One Thousand rifles to have the “Style Three” barrel inscription. This rifle shares Granville Stuart's One of One Thousand's exciting Montana frontier heritage but also remains one of the finest Winchester One of One Thousand rifles extant today. Most One of One Thousand rifles are plain and saw significant use, especially those that went West, but Thomas Stuart obviously took great care of his beloved factory engraved rifle given it remains without a doubt the finest "Style Three" One of One Thousand in existence and certainly one of the finest and most historic of all One of One Thousand Winchesters known. Like Granville's rifle, Thomas's rifle has been featured in several publications, including: "The Story of the Winchester 1 of 1000 and 1 of 100 Rifles" by Lewis on page 30, "Winchester: The Golden Age of American Gunmaking and the Winchester 1 of 1,000" by R.L. Wilson on page 64, "Winchester: An American Legend" by Wilson on page 49, "Winchester's New Model of 1873 A Tribute Volume II" by Gordon on 385 and 388. In the first book, Lewis writes, “The story of Granville Stuart is, in many ways, the story of the Montana Territory and the fledgling state of Montana.” “His elegant rifle, along with his brother Thomas’ rifle, are the only ones to have the Style Three barrel inscription. At the time the Stuart rifles were produced, the ‘standard’ type of barrel inscription was the Arabic 1 of 1000. In the last book, Model 1873 expert Gordon writes, “Few historic guns have as much interesting documentation as serial number 5611 and 7282, both 1 of 1000s.” A copy of a factory letter for Granville Stuart's rifle is included and lists it as 1 of 1,000 rifle with an octagon barrel, set trigger, XXXX checkered stock, Vernier peep and windgauge sights, casehardened finish, and Granville Stuart engraving. It was received in the warehouse on August 13, 1875, and shipped on August 21, 1875, in order 3514 which is the same order number listed on the ledger entry for Thomas Stuart's rifle. The rifle has “Thomas Stuart/1875” on the left side plate accented by scroll and geometric line engraving, an inlaid silver band at the muzzle, a dovetailed brass blade front sight, an adjustable sporting rear sight, the “Third Style” “One of One Thousand” in script engraving in a decorative banner with floral finials on top of the barrel at the breech followed by another inlaid silver band, scroll engraving on the top of the receiver and around the checkered oval “thumb-print” on the late First Model style dust cover which rides in grooves mortised in the front section of the frame, more scroll around the screw in the top of the frame, a border around the hammer well terminating in a scroll accent ahead of the adjustable peep rear sight, “Model. 1873.” on the tang under the sight, wavy borders on the sides and bottom of the frame with slight scroll accents, three sets of scrolls on the right side of the frame, scrolls at the front and rear of the frame on the left, the serial number engraved on the lower tang, and, correctly, no caliber marking on the elevator. The stock and forearm are checkered, and the 4x deluxe walnut buttstock has absolutely exceptional figure. The stock compartment contains a takedown cleaning rod. Adding significantly to this rifle's already considerable historical interest and value is the fact that Granville Stuart specifically ordered this One of One Thousand and his own because of the advertised enhanced accuracy of these rifles over regular Model 1873s. He intended these rifles to be actual used on the frontier for defense against Native American attacks, meting out "frontier justice" to rustlers and outlaws, hunting, and competitive target shooting. The One of One Thousand program had been announced in 1873 and then more fully explained in Winchester’s 1875 catalog under the headline “Variety of Arms.” The details of this section are covered in depth in Lewis’ book, and the most relevant section is worth reporting here to show why men like Granville and Thomas Stuart would have been drawn to order these expensive rifles for use on the Montana frontier: “Every Sporting Rifle we make will be proved and shot at a target, and the target will be numbered to correspond with the barrel and be attached to it. When one hundred barrels are thus proved, the one making the best target will be selected and set aside, and another hundred proved in the same way, and so on until one thousand have been tested and ten targets selected with the barrels with which they were made. They will then be made up into Guns, in which each part is selected with the utmost care and finished in the finest manner. They will then be again subjected to trials for accuracy, and the best of the ten selected and marked ‘One of a thousand,’ the price of which will be $80.00 to $100.00. The other nine will be marked ‘one of a hundred,’ and the price will be from $60.00 to $75.00 each. Sportsmen will readily see that this severe process of gleaning will be a slow and expensive one, and the result be but a limited number of choice Guns, and that orders should be given in advance of their wants, or patience exercised with the necessary delay of filling them.” A regular Model 1873 for comparison cost $50 when the rifles were first debuted. Period documentation on this rifle begins even before it left the factory and includes a copy of the letter from Granville Stuart to Winchester explicitly laying out what he wanted for his and Thomas' 1 of 1,000s. He had previously rejected two prior rifles because they did not meet his specifications and expectations based on Winchester’s advertisement. . After receiving the first rifles that he rejected, he wrote to Winchester on May 20th, 1875, stating “The two 1 of 1000 rifles order by me arrived in good order but I am disappointed in them because you did not send such as I ordered, nor do you give any explanation why you did not follow the terms of the order.” After repeating the above order, he notes that Winchester had initially said they could not send a One of One Thousand meeting his specification for some months but could send “a very fine gun, finished in accordance with my instructions.” He wrote back tell them he wanted nothing but One of One Thousand Rifles and repeated that he wanted “’two of your very finest finished (not plated) one of a thousand rifles.’ Now with the exception of the wood in the Model 1873, I do not see that the guns are any better finished you’re your common ones, there is not a single line of engraving on them, and you did not send a hunting front sight nor a Beach front sight, nor did you send the leather cases, and although you state the sights are adjusted to 1000 yards, yet I find upon [inspection] that their greatest range is only 850 yards.” He notes that he has “some cause to be dissatisfied with” Winchester’s handling of his order but did note that his rifle “shoots remarkably well.” He also noted in a letter on June 14, 1875, that the new rifles should come with both hunting sights and globe and peep sights and the latter graduated out to 1,000 yards and “on some appropriate place on this latter engrave in fancy text surrounded by a wreath of flowers my name and date this, ‘Granville Stuart 1875; and on the other ‘Thomas Stuart 1875’ in same styles. The guns of course to be ‘one of a thousand,’ engraved and finished in your best style. I also want the words ‘One of a Thousand in fancy letters and surrounded by a wreath or other appropriate border for the figures on those guns you sent before, ‘1 of 1000’ are neither neat nor of a handsome appearance.” In this statement, you can credit Granville Stuart with generating the distinctive Third Style inscription on his rifle and his brother Thomas’ and the Fourth Style that followed. He also specified a casehardened finish. Some of these letters are also in part transcribed in the pages in the books above. His original order from October 22, 1874, had requested: “Two of your ‘One in a Thousand Rifles, 24 inch, Octagon barrels, set triggers, & finely engraved, in fact the finest guns made by you, but not plated, Model of 1873, (center fire) fitted with hunting sights, and also peep rear sight, with Beach front sight. Also wiping rod and all appurtenances & leather case for each, full length of the gun." He added, “If these guns are as accurate as they should be . . .and as well finished as described I think many can be sold in this territory.” On November 15, 1874, he noted that his goal was to get rifles “in superior finish” and desired the rifles be “as nearly absolutely accurate as you can make them” since they intended to use them in shooting matches. A ledger from May 1875 lists “for ‘One of a thousand’ Winchester rifle 122.50.” among other expenditures including ammunition, candy, and other regular expenditures. The staff at the Winchester factory clearly took their time this time around to ensure the Stuart brothers were satisfied with their rifles by truly supplying some of the finest wood we've ever seen on a Model 1873 and tastefully embellishing and inscribing the rifles personally for the brothers. They succeeded in satisfying Granville given, on September 6, 1875, he wrote that the rifles "which arrived yesterday are perfect in every particular, they are far superior to any rifle made, except for very long range shooting, and I am not sure that I will not make even that exception for today at my first trial of my gun I made 45 out of a possible 60 at 500 yards, and I expect to be able to reach 55 at my next trial. When I get it down to a scratch, I will send you some of my scores." One of his friends was so impressed by the Stuart brothers’ rifles that he had Stuart order him a One of One Thousand on May 23, 1876. Winchester surprised his friend by making it more deluxe than was ordered. On July 26, 1876, Stuart wrote to them with the $105.75 payment for that rifle stating the rifle “is a magnificent gun and exceeds any anticipations, as I had not expected any engraving or peep & combination front sights for which accept my thanks. It is indeed a beauty and the friend for whom I ordered it is in ecstasies over it and well he may be for if the Sioux should come a little further up this way it will be a mightily handy thing to have in the house. If poor Custer’s heroic band had been armed with these rifles they would have covered the earth with dead Indians for 500 yards around and it is probable a portion of them [meaning Custer’s men] would have been alive when Gibbon and Terrys forces reached the bloody field. Why the Government does not adopt your arms is beyond any comprehension.” Clearly Winchester had succeeded in pleasing Granville and establishing themselves a healthy reputation on the Montana frontier. Granville Stuart (1834-1918) led a remarkable life that parallels the history of the American West and was a gold miner, Montana pioneer, rancher, vigilante leader of “Stuart’s Stranglers," an author, and a statesman among other vocations. He has been called the “Father of Montana” and “Mr. Montana” and was a nationally known figure in his own time and lived the most notable years of his life as a pioneer in Montana in the second half of the 19th century. His life story was a grand adventure with gold, shootouts, travels through dangerous conditions, conflicts with Native Americans, and even years spent in faraway lands that certainly feel like a story you might have heard or seen before in a Western. Thomas Stuart (1839-1915) was cut from much of the same cloth as his two eldest brothers and was also an influential pioneer in the Montana Territory, especially in Deer Lodge. He may have been the better marksman based on his performance in the two historic matches in 1875, the same year this rifle shipped. On October 8, 1875, the New North-West reported the scores from the match between the Deer Lodge team led by Granville Stuart and Samuel T. Hauser's Helena team. In the 1,000 yard match, Thomas shot the best with a score of 28 to Granville's 24. The best score on the Helena team was 22. In the 500 yard match for the Creedmoor rifle, Thomas was again the best marksman with a score of 56. Granville and the best competitor on the other team each scored 51. With the Stuart brothers' marksmanship, the Deer Lodge men brought home both prizes from the territorial fair. In a match the following year between the two teams, Granville bested Thomas by two points and their team again beat the Helena marksmen, although by this time Granville is noted to have been shooting a Sharps Creedmoor Rifle while Thomas was using a Sharps sporting rifle and is noted as having two defective cartridges resulting in two zeros. Of the shots fired, if you drop those two shots, he again out shot Granville, and that becomes clear when you see the targets. Two of the Helena marksmen shot it out for the individual win and prize. Thomas was the son of Robert and Nancy Stuart. He was born in Iowa and grew up in Muscatine County just to the West of our Rock Island, Illinois, facility with his older brothers James (1832-1873), Granville, and Samuel (1836-1909). Robert, Granville, and James went to California in search for gold in 1852, and Thomas didn't see Granville or James again for more than a decade. Thomas headed to the West in the early 1860s and mined in Colorado. Granville wrote to tell Thomas of his gold discoveries in the Alder Gulch which induced Thomas and his other mining friends to move to Montana leading to a gold rush in 1862. Some sources say he was met with hostile Indians during his journey which caused him to end up temporarily in Boise, Idaho. Others say he headed to Boise first intentionally to mine there and then left the following spring. The Society of Montana Pioneers indicates he then traveled across the mountains via Camas Prairie and Lava Bed trail and arrived at the Alder Gulch in May of 1864. After arriving in Montana, he worked in the Dance, Stuart & Co. store with James and also prospected with Granville and continued to work as a miner. He married the following November to Ellen Armell (1853-1934) of French-Canadian and Piegan ancestry whose father was the agent at the Big Timber Indian Agency. In 1870, they were living southeast of Deer Lodge, likely on one of his claims, and soon made good money from high grade ore at Lower Boulder and Pioneer and was doing well-enough to loan Granville $1,000 and to hire servants and expanded into horse breeding. When James died in 1873, Granville and Thomas traveled 500 miles to bring James back for burial in Deer Lodge. With the loss of the eldest brother, Granville became the family patriarch and became even closer with his youngest brother Thomas as demonstrated by this rifle and their continued business connections although some have also hinted at Granville's jealousy and disapproval of some of his brothers choices. Given Thomas' loan to Granville, perhaps the rifle was a thank you gift, but it may have also been paid for by Thomas himself given he was the more financially stable of the brothers. That same October, they also opened the 5-Stamp Stuart Mill with Rezin Anderson per the New North-West. That venture was ultimately a failure, but together, they continued to buy and sell mining claims to make a profit in the 1880s and 1890s. In 1875, Thomas was one of the members of Pioneer Co. which owned the Pioneer Ditch and the Keystone Ditch and mined for gold. Like his older brother, he served in various local civic offices and organizations, including the Masons and as the secretary and a board member of the Montana Collegiate Institute, and donated $5,000 for the building of St. Mary's Catholic School despite being a Presbyterian. In 1877, he led the Deer Lodge Volunteers during the Nez Perce War in defense of the territory which also led to some controversy in the newspapers over General O.O. Howard's criticism of the volunteers. Thomas purchased land in 1880 from Colonel J.C. Thornton and established a homestead near the north of town. On November 9, 1883, the New North-West ran an advertisement for his horses and separately noted that "One of the best Horse Farms in the Territory is that of Thomas Stuart, Deer Lodge. His stock is unexcelled, Live Oak and his progeny having first rank wherever known." It also noted that a couple of Conrad Kohr's horses along with several of Granville Stuart's had been stolen. The next summer, Stuart's Stranglers meted out frontier justice to suspected rustlers, killing at least 20 in extra-judicial gun fights and lynchings. Thomas Stuart's involvement in the vigilante activities of his brother aren't clear. He was an actual lawman as Deer Lodge's night marshal for a decade, so he might have stayed out of. 1884 was also a terrible year for his family in a fashion all too common on the frontier: he and his wife lost three of their children to diphtheria within one month early in the year. On April 5, 1884, he sold his 160 acres to Conrad Kohrs and John Bielenberg and then moved into a house owned by Granville in Deer Lodge. Kohrs and Bielenberg had previously purchased 2/3 of his brother's DHS Ranch. He worked for Kohrs & Bielenberg, the biggest cattle ranchers in the territory. In 1885, the Montana Stock Growers Association was formed and headed by Granville, and Thomas was appointed to the position of territorial veterinary surgeon despite lacking the qualifications although he was certainly experienced with livestock. He resigned to allow an Dr. George H. Keefer to take the role. He was later appointed deputy surgeon in 1887. He died suddenly in 1915 while caring for his horses, and his funeral was held at the local Masonic hall. He was survived by two sons and three daughters as well as his wife. Provenance: The Mac McCroskie Collection
Documentation
Antique
Caliber / Gauge: 44-40 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 30
Special Order Nickel Winchester Deluxe Second Model 1873 Rifle
Manufactured in 1880, this is a very scarce example of a Winchester deluxe Second Model 1873 rifle with a special order full nickel plated finish. The Second Model receiver has the dust cover guide rail retained by two screws and the dust cover with gripping serrations at the rear. Renowned Winchester author, George Madis, states in "The Winchester Book" that only one of every 600 Model 1873s received a plated finish, either partial or full, and that only one of every 600 received special wood, making a rifle in this configuration incredibly scarce. The included factory letter lists the rifle with an octagon barrel, plain trigger, checkered pistol grip stock, graduated peep and globe sights, and a full nickel finish when received at the warehouse on 27 March 1880 and shipped the same day in order number 19577. The top barrel flat is marked with the two-line address and King's patent markings, and the rifle correctly lacks caliber markings, as .44 W.C.F. was initially the only caliber offered for the Model 1873. The model designation is marked on the upper tang and the serial number is on the lower tang. The left side of the lower tang is marked "XX 671" and "671" is marked inside the buttplate. The stock does not appear to have a matching assembly number but it appears to be original. It is fitted with a period replacement German silver blade front sight and an elevation adjustable notch rear sight. The upper tang shows evidence of once having a peep sight mounted, with filler screws now in the factory tapped holes, and the stock inlet shows evidence of the peep sight mounting holes. It is mounted with an H-pattern checkered forearm and pistol grip stock with ebony grip insert and a trapdoor crescent buttplate (cleaning rod not included).
Documentation
Antique
Caliber / Gauge: 44-40 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 31
Winchester Model 1866 Lever Action Rifle
The legendary Winchester Model 1866 or "improved Henry" was one of the earliest and most widely used repeating rifles in the American West and saw use in conflicts over land, gold, and other resources on the frontier in the second half of the 19th century in the hands of settlers, Native Americans, outlaws, lawmen, and hunters. It is the direct descendant of the Henry rifle and traces its lineage back to earlier repeaters like the Volcanic. This rifle was manufactured in 1872 as a third model with the serial number stamped in block numerals behind the trigger, and the distinctive brass receiver has the more moderately curved shape at the rear when compared to the earlier first and second models. The rifle is fitted with a German silver blade front sight, period modified two leaf rear sight, and tang peep sight with 4 inch staff. The top barrel flat is stamped with the two-line Winchester New Haven address/King's improvement patent marking. Sling swivels are mounted on the underside of the forend cap and stock. The forearm and straight grip stock are nicely figured walnut. The buttstock is fitted with a trapdoor crescent buttplate (cleaning rod not included).
Antique
Caliber / Gauge: 44 RF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 32
Winchester Model 1892 Saddle Ring .44 W.C.F. Carbine
These Winchester Model 1892 saddle ring carbines were incredibly popular in the American West due to their ability to pair with a Colt Single Action Army revolver and share ammunition. There were valued for their small size during the age of travel on horseback and remained so into the age of the automobile. It was stronger and sleeker than Winchester's earlier "pistol caliber" repeaters like the classic Model 1866s and Model 1873s. This example was manufactured in 1900, is chambered in the always desirable .44-40 WCF caliber, and is in outstanding condition. Model 1892s were a working gun of the period, and rarely do we catalog turn of the century examples in such excellent condition. It is fitted with a pinned blade front sight and a folding ladder rear sight on a barrel stamped with the two-line Winchester address ahead of the rear sight and "44 W.C.F." at the breech. A saddle ring is mounted on the left side of the receiver. The underside of the frame has the serial number. The upper tang is stamped with the three-line Model/patent date information. Mounted with a smooth walnut forearm and straight grip stock with a blued carbine buttplate.
Antique
Caliber / Gauge: 44 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 33
Staten Island Yellow Fever War New Haven Arms Volcanic Carbine
This carbine is featured on page 112 of "Volcanic Firearms: Predecessor to the Winchester Rifle" by Lewis and Rutter as part of their discussion of Volcanic carbines used during the Staten Island Yellow Fever War in 1858. One of the captions states, " Identification number '19' stamped on the receiver of a New Haven Arms Company 16-inch carbine, serial number 136...This carbine, and others noted with similar stamped numbers, are thought to be among those stamped with inventory numbers by the New York Metropolitan Police." They also show an example marked with "8" that was previously sold by Rock Island Auction Co., and we have also sold examples marked with "7," "18," and "37" in the same location. They point to Herbert G. Houze's article "The Volcanic in Service During the Staten Island War of 1858" in the September/October 2005 issue of "Man at Arms." Volcanic carbines are well-documented as used by New York City police officers to quell a mob that attacked the hospitals on Staten Island in New York Harbor. The New York City Quarantine Station was situated on 30 acres of land on Staten Island that had been sold by former New York Governor and U.S. Vice President Daniel D. Tompkins. The sale had a provision that the land would revert to Tompkins's heirs if it was no longer used as the quarantine station. Because of the expansion around the area, the land became more valuable and citizens also grew concerned about the increased proximity of the station and local residents. Ray Tompkins who stood to inherit the land if it was abandoned by the government organized a mob that pulled patients from their beds and burned the Men's Yellow Fever Hospital and the Small Pox Hospital as well as other buildings at night on September 1, 1858. U.S. Marines arrived the next day to defend the government buildings, but government officials sent in an insufficient force thinking the danger had passed, and the mob attacked again that night and burned the Women's Yellow Fever Hospital and the homes of two of the doctors. In response, the city sent in a large force of police officers to secure the area. The New York Times on September 6, 1858, reported that, "The police force at Quarantine consists of 100 men...Each man is armed with a Volcanic repeating rifle, loaded with twenty balls, which can all be fired in less than two minutes. The aggregate is equal to one thousand shots." Their math skills were lacking given that would total 2,000 shots, but the twenty-round capacity points to the "16 inch" variation of the carbines, and the low production of the Volcanic carbines combined with the numbers found on these carbines certainly fits with the idea that these were the New York carbines. Officials quickly setup tents to care for the patients, and Lewis and Rutter indicate that situation soon calmed down. Instead of being imprisoned for his crimes, Tompkins was acquitted. The authors also point out that New Haven Arms Co. agent Joseph Merwin also promoted the Volcanics in advertisements in the New York Times starting on October 12, 1858. Reports indicate that 120 Volcanic carbines saw service with the NYC police during the conflict. The New York Times on May 26, 1859, reported that "The bill of the New Haven Arms Company, amounting to $1,150, for Volcanic arms which the Company let the authorities have during the Quarantine riots, in September last, was received." Houze estimated that around 50 were kept in service while 70 were returned to Merwin and the company. It is further theorized in the book "that rifles were marked in this manner while they were in use by the New York Metropolitan Police." Further investigation into period newspapers includes other accounts of the police all being armed with Volcanic carbines, and some reports also indicate they had Volcanic pistols as well. For example, The Buffalo Commercial Advertiser on September 6, 1858, republished a report from the New York Evening Post that stated "The one hundred policemen required to be sent to Quarantine by the Commissioners of Emigration arrived there in the steamboat Dr. Kane...They were all armed with the volcanic repeating rifles and pistols, furnished by the manufacturers, and are under the command of Captain Walling, the same officer who commanded during the Seaguine's Point War. They have a six-pounder, and plenty of ammunition in charge." The report also notes that Tompkins was arrested "quietly" and "After delivering Mr. Ray Tompkins into the care of Captain Williamson, of the 14th precinct, Detectives Stephenson and Wildey returned last night to Quarantine, for further operations. At daybreak this morning they took a force of twelve policemen, armed with the volcanic repeating rifles, and sallied forth" and made additional arrests. The carbine is marked with the rack number "19" on the underside of the frame behind the cartridge elevator. It has a blued octagon barrel, casehardened loading lever and hammer, brass frame and buttplate, and a high gloss varnished walnut stock. A fixed rear sight is mounted in a dovetail on the receiver behind the elevator port. The top of the barrel flat is stamped with the later New Haven Arms Company marking: "NEW HAVEN CONN PATENT FEB 14 1854" adopted after the Volcanic Arms Company was re-organized as the New Haven Arms Company by Oliver Winchester in 1858. The left side of the lower tang has "230" crossed out by five lines and then "136" further towards the rear. The screws, inside of the buttplate at the heel, and heel of the stock under the buttplate are also numbered "136." The Volcanic lever action carbines were not a commercial success, but the design was sound and with the development of reliable rimfire cartridges evolved into the Henry Rifle and paved the way for the highly successful Model 1866 Winchester rifles and carbines. Production of Volcanic Carbines with 16-1/2, 21 and 25 inch barrels totaled fewer than 1,000 pieces, and surviving examples are rare. These "rack numbered" 16 1/2 inch carbines are particularly rare and desirable. The Volcanic lever action carbine is a key piece in the evolution of the Winchester lever action rifle. Provenance: The Stephen Rutter Collection, Property of a Gentleman
Antique
Caliber / Gauge: 41 Volcanic
Lot 34
Deluxe Special Order Winchester Model 1873 Lever Action Rifle
This is an exceptional Winchester Deluxe Model 1873 lever action rifle with extensive special order features. The example has the Second Model receiver with screw-fastened dust cover rail and dust cover with serrated finger guide. The rifle has a blued full-octagon barrel, dust cover, bolt and loading gate. The forearm cap, hammer, trigger, lever and crescent buttplate are color casehardened and the receiver has the very desirable, special order, casehardened finish. The forearm and pistol grip stock are deluxe fancy grain walnut with checkered panels and a high polish piano finish. The bottom of the pistol grip has an ebony inlay. In addition to the special order casehardened receiver, deluxe checkered pistol grip stock and forearm and rare combination of full octagon barrel and half-magazine the rifle is equipped with other special order features which include: (1) globe front sight, (2) folding leaf tang sight and (3) single set trigger. The rifle is accompanied by a Cody Firearms Museum factory letter that describes it as: "Type: Rifle, Barrel: Octagon, Trigger: Set, Checkered Stock, Pistol Grip, Casehardened and Sights: Peep & Globe Sights". The letter states this rifle was shipped from the Winchester warehouse on May 31, 1882. In addition to the special order features the rifle has a standard buckhorn sporting rear sight and the butt plate has a sliding brass trap door. The butt trap contains a four-piece jointed steel cleaning rod with brass tip. The top of the barrel is roll-stamped with the legend: "WINCHESTER'S-REPEATING ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29.1866. OCTOBER 16. 1860." in two-lines ahead of the rear sight. The serial number is stamped in small numerals on the lower tang behind the lever latch. Provenance: The Joe Marlin Hilliard Collection
Documentation
Antique
Caliber / Gauge: 44 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 35
Civil War Production First Model New Haven Arms Henry Rifle
This first model Henry lever action rifle was manufactured in 1862. The rifle has the distinctive brass receiver and crescent buttplate with octagon barrel and integral 15-shot magazine. The rifle has the first style receiver with rear sight dovetail and early style buttplate with rounded heel. The rear sight dovetail on the receiver was discontinued about serial number 3,000, and a buttplate with pointed heel was introduced at about serial number 4,000. The barrel has the early pattern nickel silver front sight blade with rounded back and third pattern folding leaf rear sight. The third pattern rear sight is distinguished by "900" stamped below the center notch in the top of the leaf elevator bar with rounded ends and lack of the elevator stop screw in the top of the leaf. The stock and barrel are fitted with a sling swivel and loop for a sling hook. Sling swivels and loops were extra cost, special order items until mid-1863. The buttplate has a hinged brass trapdoor and the butt trap contains a four-piece hickory cleaning rod. The stock is straight grain American walnut with a varnished piano finish. The rifle has a blue barrel and integral magazine. The hammer, trigger and lever are color casehardened. The top barrel flat is roll stamped with the two-line legend "HENRY'S PATENT. OCT. 16. 1860/MANUFACT'D BY THE NEWHAVEN ARMS.CO. NEWHAVEN.CT." The left side of the lower tang is stamped with the numbers "1159" and "1862. "1862" repeated on the stock inlet, the inside of the buttplate below the trap, both upper tang screws, the lower tang screw, and both buttplate screws. The serial number "1159" is repeated on the top barrel flat between the rear sight and the receiver. Experts believe that most of the 7,500 Henry rifles manufactured between April 1862 and January 1865 were purchased for use in the Civil War and saw some military service. Aside from 900 rifles purchased by the Ordnance Department in 1863-1864 to arm the 1st D.C. Cavalry Regiment, nearly all Henry rifles used in the Civil War were privately purchased by soldiers who wanted to have the most advanced firearm available and take advantage of the sustained firepower of a 15-shot magazine rifle. As rifles that saw use during the Civil War, the great majority of the Henry rifles under serial number 7,500 show moderate to heavy wear. It is not often that surviving Henry rifles are encountered with original blue finish as found on this example. The condition of this rifle was summarized by noted firearms dealer and collector Herb Glass, Jr., stating that the rifle is "a crisp and unusually nice example. It has seen use, but has obviously been well cared for...and generous amounts of blue are retained on the barrel assembly. Perhaps most important, the brass and wood are untouched and in lovely condition overall."
Documentation
Antique
Caliber / Gauge: 44 Henry RF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 36
Winchester Semi-Deluxe Model 1894 Takedown Rifle
As "the ultimate lever gun" for over a century, the Winchester Model 1894 rifle holds a special place in the hearts of collectors. These "working guns" were not often ordered with special, extra cost features, making semi-deluxe takedown variations highly sought after by collectors, especially those in high condition like this example which was manufactured in 1902. The rifle is in takedown configuration and is fitted with a half octagon barrel and half magazine. The barrel has a dovetail blade front sight, a three leaf rear sight (one fixed, two folding), the two-line address on the top flat ahead of the rear sight, "30 WCF" marked on the breech, and the two-line nickel steel marking on the upper left flat. The upper tang has the three-line model/patent marking. The forearm and pistol grip stock are checkered. The buttstock is fitted with a hard rubber Winchester grip cap and a steel shotgun buttplate. The left side of the lower tang is marked "13631 S." The assembly number is repeated on the butt of the stock and on the back of the buttplate.
Antique
Caliber / Gauge: 30 WCF
Lot 37
Winchester Model 1886 Lever Action Rifle
The accompanying Buffalo Bill Historical Center letter states the rifle was received in the warehouse on December 7, 1895, and shipped on December 9 and confirms the octagon barrel in .38-56 caliber and plain trigger. The rifle has the desirable casehardened frame and is fitted with a dovetail blade front sight and an elevation adjustable buckhorn rear sight. The top barrel flat is stamped with the two-line address ahead of the rear sight and "38-56 WCF" at the breech. The upper tang is marked '"-MODEL 1886-." The lower tang has the two-line patent date marking and the serial number. The forearm and straight grip stock are plain walnut. The buttstock is fitted with a solid crescent buttplate.
Documentation
Antique
Caliber / Gauge: 38-56 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 38
Winchester Model 1873 Lever Action Musket with Bayonet
This excellent Winchester Model 1873 Musket was manufactured circa 1903. This musket has the Third Model receiver with integral dust cover rail and dust cover with serrated edges. The musket has the distinctive 30-inch round barrel with full length forearm secured by three barrel bands, steel block front sight that serves as a mount for a socket bayonet, socket bayonet, sling swivels on the middle barrel band and stock and military style folding leaf rear sight. The musket has a carbine style buttplate with sliding brass trapdoor. The upper receiver tang is factory drilled and tapped. The barrel, magazine, barrel bands, receiver and dust cover have the Winchester charcoal blue finish. The loading gate is fire blue. The hammer, trigger, lever and crescent buttplate are casehardened with muted case colors. The stock and forearm are oil-finished straight grain American walnut. The top of the barrel is roll-stamped, "WINCHESTER'S REPEATING ARMS NEW HAVEN Ct./KING'S IMPROVEMENT PATENTED MARCH 29. 1866. OCTOBER 16. 1860." in two lines between the lower barrel band and the rear sight. The caliber, "44 W.C.F.", is roll-stamped between the rear sight and the receiver. The upper receiver tang is roll-stamped, "- MODEL. 1873. -" in fancy letters with foliate devices at either end. "44 CAL" is roll-stamped across the bottom of the brass cartridge elevator in script letters. The serial number is stamped in script between the lever latch and the rear tang screw. This musket is one of a 700 gun lot of Model 1873 Muskets in the 569,000-57,1000 serial number range that were shipped to Central America in September 1903. In the late 1950s, some of these muskets were discovered in storage in Nicaragua and imported to the U.S. These muskets were generally unissued and unfired and remained in nearly new condition. Provenance: Richard Peters, USMC, Reserves Law Enforcement, a Gentleman
Curio and Relic
Caliber / Gauge: 44 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 39
Factory Engraved Winchester Deluxe Model 1890 Slide Action Rifle
Manufactured in late 1906 this deluxe Model 1890 shows beautifully executed factory No. 10 pattern engraving. During the period Winchester promoted the No. 10 engraving as the following: "Anyone wishing to ornament a rifle at small expense will find this style very desirable, as it possesses the characteristics of the more elaborate and costly styles." The quality of engraving is equal to the more expensive grades Winchester offered. The receiver is decorated with fine scrollwork on punch dot background, scalloped borders, and a game scene of a buck on the left side. The accompanying factory letter states the rifle was received in the warehouse on January 3, 1907, and shipped on January 7 and confirms chambering in .22 WRF and checkered pistol grip stock. Although the factory engraving is not mentioned in the letter, it is most certainly factory as confirmed by renowned firearms historian R.L. Wilson. Wilson evaluated the gun, and his conclusions are presented in his accompanying letter: "The author regards Model 1890 Takedown Rifle No. 301703 as an excellent and completely authentic example, in every respect...As was sometimes the case, the [factory] notes kept on No. 301703 missed the fact that the rifle was factory engraved. An examination of the rifle reveals that the engraving present was there from the date of manufacture. The patina and bluing are clearly the originals, and applied at the factory following embellishments." The barrel is marked with the two-line address/patent marking and caliber designation on the top flat and is fitted with a dovetail beaded blade front sight and an elevation adjustable rear sight. Mounted with a twelve-groove slide handle and finely figured pistol grip stock with a hard rubber grip cap and crescent buttplate. The left side of the lower tang is marked "2514 X." The assembly number "2514" is repeated on the butt of the stock and back of the buttplate.
Documentation
Curio and Relic
Caliber / Gauge: 22 WRF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 40
Antique Winchester Model 1890 Rifle with Casehardened Receiver
Manufactured in 1898. Fitted with beaded blade front and elevation adjustable rear sights. The barrel is marked with the two line Winchester address in the middle of the top flat and "22 W.R.F" caliber marking at the breech. The casehardened takedown receiver is marked with the three line model marking on the upper tang and serial number on the lower tang. Mounted with a straight grain 12 groove forend and straight grip buttstock with casehardened buttplate. The included factory letter lists this rifle as chambered in Winchester Rimfire when received in the warehouse on August 12, 1898, and shipped the next day on order number 1819.
Documentation
Antique
Caliber / Gauge: 22 WRF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 41
Winchester Model 1890 Slide Action Rifle in .22 Short
Manufactured in 1930. Beaded blade front and elevation adjustable notch rear sights. The barrel inscription shows similarities to both the sixth and seventh styles with the addition of the 1911 patent date, full "1890" year marking, and the caliber marking integrated into the stamping. Third Model receiver with exposed locking lugs, Winchester "WP" proofs on the barrel and receiver at the breech, non-factory added "WINCHESTER/TRADE MARK" roll stamp on left side of receiver, standard loading port cut in the magazine tube, and matching numbers on the receiver and lower tang. 12 groove slide handle and smooth straight grip stock with blue steel crescent buttplate.
Curio and Relic
Caliber / Gauge: 22 RF Short
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 42
Special Order Winchester Model 1886 Deluxe Takedown Rifle
This Special Order Winchester Model 1886 Deluxe Takedown Rifle was manufactured in 1904. The letter lists the rifle features as "33 caliber, round barrel, Plain trigger, Checkered stock, Pistol grip, Full magazine, Shotgun butt, Rubber butt plate, Takedown and Oil finish". The letter states that this rifle was shipped from the Winchester warehouse on April 19, 1905. The rifle has a blue finish on the barrel, magazine, forearm cap, receiver, loading gate and trigger. The hammer and lever are color casehardened. The stock and forearm are deluxe, fancy grain, walnut with Winchester Style H checkering and a piano finish. The stock has a black, hard rubber, pistol grip cap embossed with "WINCHESTER REPEATING ARMS" in relief and a black, hard rubber, checkered, shotgun buttplate with the circular Winchester logo in the center. The 24-inch round barrel has a Lyman "Winchester Express" front sight with bead and a Lyman Express rear sight. The rear sight has two folding leaves; the first leaf has a flat top and white sight triangle, and the second leaf has a large V. A Lyman folding combination rear sight is mounted on the receiver tang. The top of the barrel is roll-stamped "MANUFACTURED BY THE/-WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A.-" in two lines ahead of the rear sight. The left side of the barrel is roll-stamped "NICKEL STEEL BARREL/ESPECIALLY FOR SMOKELESS POWDER" in two lines between the rear sight and the receiver. "33 W.C.F." is roll-stamped on the top of the barrel just in front of the receiver. The 1884 and 1885 patent dates are roll-stamped on the lower tang behind the trigger, and the serial number is stamped on the lower tang behind the tang screws. The rifle is complete with three Winchester hang tags, with one of them listing the original price as $30.00.
Documentation
Curio and Relic
Caliber / Gauge: 33 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 43
Special Order Winchester Model 1873 Lever Action Rifle
This special order Winchester Model 1873 rifle was manufactured in 1885. The rifle has the Third Model receiver with integral dust cover rail and dust cover with serrated edges. The rifle has a 24-inch round barrel with half magazine. The barrel has a "Rocky Mountain" front sight with steel blade and a replacement buckhorn style rear sight with flat top. The upper tang is factory drilled and tapped for a folding combination tang sight. The barrel, dust cover, loading gate and trigger have a blue finish. The forearm cap, receiver, hammer, lever and crescent buttplate are color casehardened. The stock and forearm are 1X, fancy grain American walnut with a varnish finish. The rifle is accompanied by a factory letter which describes it as: "Type: Rifle, Barrel Type: Round, Trigger: Plain, 1/2 Magazine", and "Casehardened". The letter states this rifle was received and shipped from the Winchester warehouse on December 11, 1885. The top of the barrel is roll stamped with the two-line legend: "WINCHESTER'S-REPEATING-ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860." ahead of the rear sight. "44 CAL." is roll stamped between the rear sight and the receiver. "44 CAL" is roll stamped across the bottom of the cartridge elevator. The upper receiver tang is roll stamped: "-MODEL 1873-" in fancy letters with foliate devices at either end. The serial number is stamped in script between the lever latch and the rear tang screw. Casehardened receivers were special order features on Model 1873 rifles and carbines. Rifles with casehardened receivers usually had fancy grain walnut stocks and forearms.
Documentation
Antique
Caliber / Gauge: 44 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 44
Winchester Centennial Model 1876 Lever Action Sporting Rifle
The included factory letter states the rifle was received in the warehouse on September 19, 1882 and shipped on September 21 with an octagon barrel in .45-60 caliber and plain trigger. This Third Model rifle has the integral dust cover guide rail and dust cover with serrated rear edges. The rifle has a 28-inch octagon barrel and full length magazine. The barrel has a sporting style front sight with nickel-silver blade and a folding leaf rear sight graduated to "10" and marked "1876" at the top of the leaf. A folding, graduated, "Mid-Range Vernier Peep Sight" with early style beveled base is mounted on the receiver tang. The crescent buttplate has a sliding brass butt-trap door. The top barrel flat is roll-stamped with the two-line legend: "WINCHESTER"S-REPEATING ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860." ahead of the rear sight. "CAL. 45-60" is roll-stamped on the top barrel flat between the rear sight and the receiver. "45-60" is roll-stamped in script numerals across the brass cartridge elevator. The serial number is roll-stamped in script numerals on the lower tang between the lever latch and the rear tang screw. The barrel and magazine have a blue finish. The forearm cap, receiver, dust cover and bolt are bright blue. The loading gate is fiery niter blue. The hammer, trigger, lever and crescent buttplate are casehardened. The straight grain walnut stock and forearm have a semi-gloss varnish or oil finish.
Documentation
Antique
Caliber / Gauge: 45-60 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 45
U.S./Wells Fargo Smith & Wesson First Model Schofield Revolver
This revolver is one of 3,000 First Model Schofields purchased by the U.S. Government. They were used by the U.S. Army for only a few years before being sold as surplus on the civilian market and used in the West by Wells Fargo express agents and many others. The U.S. military markings include "L" and "P" stamped on the barrel and rear cylinder face, and "L" on the frame. Lacks a visible "US" marking on the butt which has a faint serial number only. The revolver is in the standard Wells Fargo configuration with the barrel shortened to 5 inches as was common with 19th century revolvers purchased by various express companies, nickel finish, and the Wells Fargo marking on the right side of the barrel ("W.F.&CO.EX. 1879"). "GWF" initials are carved on each grip panel. Matching serial numbers appear on the butt, right grip panel, and cylinder. Includes a Wells Fargo Services hat badge
Documentation
Antique
Caliber / Gauge: 45 S&W
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 46
American Express Co. Factory Inscribed Winchester 1887 Shotgun
The included factory letter confirms the serial number, barrel length, receiver engraving, and October 10, 1893, date of shipment on order number 1078 as one of nine guns shipped. Features a documented 20 inch riot length barrel without sights, 2 3/4 inch chamber, cylinder choke, standard "WRACO" monogram on the left side of the receiver, attached (not documented in letter but looks factory) saddle ring and bar on the left side of the receiver, and three-line address and patent marking on the lower tang. The right side of the receiver is engraved "Am. Ex. Co./44". With a two piece slab forearm and pistol grip stock with checkered iron buttplate. The left side of the stock has been marked "Robertson E.C." along the comb. Length of pull is 11 1/2 inches.
Documentation
Antique
Caliber / Gauge: 12
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 47
Wells Fargo & Co. Inscribed Presentation Cane with Gilt Grip
Beginning in approximately the 16th century, canes gradually became more popular among the upper echelons of society, reaching its pinnacle around the late-19th to early-20th centuries. They became far more than just an accessory to assist with mobility, and more of a symbol of ones status and wealth. The gilt L-shaped handle on this example has been inscribed on both side, the right side marked "B.J. Hull/Entered Employ/Wells Fargo & Co's Express/1856", and the left is marked "from/DRIVERS", a Wells Fargo Wagon, and "CHRISTMAS/1882". There is a "BJH" monogram on the butt of the grip. The remainder of the grip has floral motifs throughout. The shaft is of smooth ebonized hardwood and is tipped with German silver/iron. It measures 34 inches overall.
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 48
Wells Fargo & Co. Strongbox with Lock
Wells Fargo & Co. was started in 1852 by Henry Wells and William G. Fargo to provide shipping and banking services to the ever growing gold based economy of the California frontier before railway services became available. They quickly established themselves as the main service for transporting gold and mining supplies in the American Southwest as well. Boxes like this example were used by Wells Fargo & Co. as the safest and most secure form of gold transportation in the heyday of the Wild West era as a further protection against any number of highwaymen and train robbers looking to make their fortune through ill-gotten gains. When in transportation, strongboxes like this would have been stored under the seat of the agent assigned to it. This specific strongbox is the early style green painted variety with arched "WELLS FARGO" over "& CO." and iron mountings used circa 1870. These boxes would eventually be retired in favor of all steel models which added an extra level protection on top of being fireproof. The left side of this example retains a faded partial railway express agent label with some legible text remaining. The side mounted grip straps are absent, and felt corner protectors have been added to the bottom of the metal corner bolsters. Included with the box is a "WF. CO. EX" marked lock with shackle marked "2881" and a segment of chain attached.
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 49
Marlin Deluxe Model 1881 Lever Action Rifle
The accompanying factory letter confirms this exceptional Marlin Model 1881's special order extra length 28 inch barrel in .45-70 caliber, double set trigger, and pistol grip stock when it was shipped on December 18, 1889. High end finishes were rarely noted in the Marlin factory records. The deluxe stock on this rifle is factory original. The nicely figured walnut forearm and pistol grip stock are checkered, and the stock is fitted with a casehardened crescent steel buttplate. The Marlin Model 1881 was meant as a "working gun," and Marlin customers were generally not inclined to spend extra money on deluxe features, so very few Model 1881s left the factory with special order features, making examples like this one especially desirable. The Model 1881 was the first lever action introduced by Marlin, and only 20,535 were manufactured between 1881 and 1903 compared to 63,871 of the Winchester Model 1876 it competed with. The Marlin was the stronger gun and could chamber the popular .45-70 Govt. cartridge, and it found buyers in the American West as is clearly shown in advertisements in the Dakotas, Montana, and elsewhere in the 1880s. This gun too made it to the West as it is inscribed to a known Western settler. The right side of the receiver is period inscribed with the name "C.F. LUEBBEN," and the inscription certainly has the appearance of being factory. The rifle was owned by German immigrant Charles Frederick Luebben (1874-1947). He came to the U.S. in 1896 and earned a living as a farmer/labor in several western states including Montana, Idaho, and California. Knowing that this gun made it out West makes its high condition even more impressive. Western guns were meant to be used, and their condition generally shows hard use. This deluxe Model 1881 was extremely well cared for, nearly having the appearance of just coming off factory production line. At the time of his death at the age of 72 in March 1947, Luebben was employed as a woodcutter on the Homer Hawkins ranch in the Ophir district, California. Cause of death was a heart attack. He was survived by his brother who lived in San Francisco and worked in the restaurant business. Included are census reports, obituary, and death certificate related to Luebben. The rifle is fitted with a combination Beach front sight, an elevation adjustable rear sight, and a tang peep sight. The top barrel flat is stamped with the two-line address/patent dates marking ahead of the rear sight and "45 GOVT" at the breech.
Documentation
Antique
Caliber / Gauge: 45-70
Price Realized:
Login to viewLogin to view
Price obfuscated
Lot 50
U.S. Forest Service Antique Winchester Model 1873 Rifle
The Winchester Model 1873 rifles are known as one of the "guns that won the West", however, they were also used as working guns well into the 20th century due to their durability and ability to be paired with a Colt Single Action Army in the same caliber. This rifle is an example of that, being attributed to G.W. Chapman who, while working for the U.S. Forest Service, discovered and rescued a bear cub from a forest fire that would eventually become known as the original "Smokey the Bear". An included notarized letter from Chapman's son lists the rifle by serial number along with the attribution, and a transcript of an interview with Chapman is included which details the discovery of the bear cub. Manufactured in 1882 as a Third Model with integral dust cover rail and dust cover with serrations at the rear. The top barrel flat is marked with the two-line address/King's patent marking, it correctly lacks caliber markings as .44 W.C.F. was the only caliber initially offered, and "R.P.M" is hand scratched on the bottom of the cartridge elevator. The model designation is marked on the upper tang and the serial number is on the lower tang. It is fitted with a blade front sight and elevation adjustable semi-buckhorn rear sight. It is mounted with a smooth forearm hand marked "44W" on the left and a straight grip stock with a trapdoor crescent buttplate (cleaning rod not included).
Documentation
Antique
Caliber / Gauge: 44 WCF
Price Realized:
Login to viewLogin to view
Price obfuscated
Page 1 of 45