Manufactured and registered in Portland, Oregon prior to the 1986 cutoff, this Uzi bolt is configured for compatibility with commercial semi-auto receivers, properly slotted on the right side to pass the restrictor block, with serial number and address engraved on top.

Excellent, with 90% original matte black finish, showing bright high point and cycling wear. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479.

Manufactured in Israel and imported by Action Arms of Philadelphia, Pennsylvania as a semi-automatic carbine, this Uzi Model B has been outfitted as a selective fire machine gun via installation of the registered conversion bolt described as Item A. No permanent modification were made to the receiver; the bolt restrictor block and barrel collar are untouched. Post front and two-leaf peep rear sights, with a non-ratcheting top cover, "A F S" marked trigger housing with proper open bolt components, knurled barrel nut, standard receiver markings, a set of ribbed forearm and grip panels, and an underfolding stock.

Very fine as upgraded to full automatic, with 95% of the black finish, showing mild wear and handling marks overall, as well as some dents on the sight wings. The panels show a few minor scratches and scuffs. Mechanically excellent.

Threaded to match the barrel currently installed in the host gun (Item B), 12 1/2 inches overall, with alloy and steel construction, internally configured with a ported expansion chamber and baffle stack. With an insulated cover.

Excellent, with 98% original matte black finish, showing some light handling marks overall.NOTE: This Silencer is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 479, National Firearms Act.