Manufactured late during World War II in Suhl, this Gustloff Werke K98k rifle is outfitted in the "long rail sniper" configuration, with the 3 1/2 inch long mounting rail secured to the receiver side wall with two guide pins and three screws, the latter also fitted with a set of smaller lock screws; mechanically this mounting system was very similar to the American-fielded M1C Sniper, though the use of an extended mount arrangement to bring the scope directly over the bore simplified armorer installation and end-user adjustment of the optics. The rifle is fitted with a hooded blade front sight and a tangent rear sight, with the receiver ring manufacturer code marked "bcd/4" on the breech of the barrel. Small eagle proofs stamped on various components. Mounted on the rail is a "bek" code Dialytan 4x scope numbered "77465/+", with a ring and matching mount set numbered "1276." All matching visible serial numbers. Fitted with a smooth pistol grip stock, which has a matching serial number to the rifle stamped in the bottom of the butt, with a checkered cupped steel buttplate. Includes leather sling and scope covers.

Very good, retains 30% mostly faded original blue finish with smooth brown and gray patina on the balance and some patches of pitting. Stock is fine with some scattered scratches and dents, and a clear stamping. Mechanically excellent. Scope and mount are fine, retaining 70% plus of the original blue finish on the tube with some smooth brown patina on the dial and rear objective piece, and the optics are a bit hazy with a solid reticle. High quality examples of late war German sniper rifles are rare on the market, as many snipers made a point to destroy or discard their equipment prior to capture for fear of reprisals.