Manufactured in 2007 and built as a pair with blued Bohler Antinit steel barrels with single steel bead sights on the matted vent ribs, chambers marked 3 inches, Briley choke tubes (skeet/improved cylinder installed), and display a band of light engraving at the breech. The barrels are mated to a coin sidelock action displaying exceptionally well laid out tight English scroll and bouquet engraving which makes excellent use of negative space with "BERETTA" hand cut on either side as well as on a ribbon on the underside. The engraving extends to the toplevers where it surrounds a gold inlaid coronet, and the right hand rolled triggerguards. Each gun is gold inlaid with the number "1" or "2" on the rib at the breach, triggerguard, and forend release. The engraving is signed on the right of the trigger plates "Giustacchini" with the "G" stylized to appear as a cat. The actions are fitted with single non selective triggers and tang mounted manual selective safeties with gold inlaid "S" markers. The pair are mounted beautifully contrasted multipoint checkered walnut forends with engraved fittings and Deeley releases, and pistol grip stocks with leather wrapped recoil pads. Included with the set is a leather wrapped Beretta double gun takedown case with brass plaque reading "Sheldon Fireman" on the front and an extra barrel with 2 3/4 inch chambers and choke tube system (modified/full installed). Extra barrel measurements: bore measured nine inches from the breech .725/.727; minimum wall thickness.032/.031 inches. Barrel and stock measurements: bore measured nine inches from the breech .729/.726; minimum wall thickness .035/.034; 1 3/8 inch drop at the comb; 2 1/16 inch drop at the heel; 14 5/16 inch length of pull; weight 8 lbs. 2 oz.

As described in "A". Barrel and stock measurements: bore measured nine inches from the breech .726/.725; minimum wall thickness .048/.045; 1 5/16 inch drop at the comb; 2 1/8 inch drop at the heel; 14 5/16 inch length of pull; weight 8 lbs 4 oz.