With a white bead front and steel mid sights on the elevated vent rib, ported single barrel. The single barrel chamber gauges at 3 1/4 inches (marked as 2 3/4") and is threaded for choke tubes (Improved cylinder installed). With standard markings on the blued frame, quick change, non-selective over/under trigger group and a tang mounted safety/trigger group release switch. Mounted on a multi-point checkered beavertail forearm and pistol grip stock with a black plastic grip cap, padded adjustable comb and adjustable recoil pad. Length of pull is 14 3/8 inches. The black Perazzi case includes a ported over/under barrel set numbered to the gun with 3 1/4 inch chambers (marked as 2 3/4") threaded for choke tubes (skeet/skeet installed), raised vent rib and dual bead sights. The case also contains an extra trigger group in a release/under configuration, 4 extra choke tubes for the single barrel set, stock wrench, assorted Allen wrenches, gun oil and two cloth barrel sleeves. A separate plastic case contains 6 Briley choke tubes for the double barrel set (tubes are not interchangeable from the double to single barrel sets) and a choke tube wrench. Single barrel measurements are: Bore diameter at 9" from breech .745; Wall thickness at 9" from breech .057. Double barrel measurements are: Bore diameter at 9" from breech T .737/ B .736; Wall thickness at 9" from breech T .053/ B .054.

Very good with 85% plus original blue finish, moderate edge wear on the trigger guard and frame, scattered surface scratches and general handling type marks. The second barrel set shows general handling marks. The wood is very good with the added adjustable comb, and recoil pad, general handling type marks, small scattered dings, and some small scuffs. Mechanically excellent. The case is very good with storage and handling type marks.