Manufactured in 1984 and imported via HK Inc of Chantilly, Virginia, the G3SG/1 is a production variant of the German G3 battle rifle intended for issue to sharpshooters. Starting life as G3's hand-selected off the assembly lines, the SG/1 variant is further accurized, including a specialized cheekpiece, buffer assembly, and a special double set trigger assembly. Automatic fire capability is retained, allowing the sharpshooter to perform ranged suppression fire and also to fight and maneuver as a more conventional infantryman if needed. Post front and 4-position drum rear sights, a birdcage flash hider on the threaded muzzle, a folding bipod on the end of the forearm, and the model, caliber, importer and date markings on the magazine well. The trigger group is "S/E/F" marked with a functional trigger pack, a red painted adjustment screw immediately behind the trigger and the set button inside the guard. Note that the trigger group is fitted with a proper military-pattern front hinge pin, not the cosmetic two-piece "pin" seen on converted HK91/93 rifles. The stock is fitted with a raised cheekpiece. Attached to the claw mounts is a Schmidt & Bender 1 1/2-6x scope, and included with the lot is a hard case, rubber scope eyepiece, sling and cleaning tools

Excellent, with 90% of the original black finish, showing some light scuffing on the receiver from the scope and mild handling marks overall. The optics are crisp and clear. Both the full auto function and the set trigger function are mechanically excellent. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.