Introduced to the Parker Reproduction line in 1988. The chart on page 180 of "The Parker Story" by Gunther, Mullins, Parker, Price, and Cote lists only 300 A1-Special custom engraved guns manufactured. This pair is signed next to the trigger guard "C. DeCamillis". Blued steel barrels with single brass bead sight on the matted, solid, concave rib which is marked "Parker Reproduction by WINCHESTER East Alton IL. U.S.A. Made in Japan", small band of floral engraving at the breech, "1" on the forend lug, 3 inch chambers, and chokes marked modified/full. The action displays beautifully executed full coverage rose and scroll engraving on all sides incorporating intertwining banners which read "PARKER" on either side. The engraving extends to the barrel release, upper and lower tangs, and the fabulous deeply chiseled fences. Highly figured, fancy checkered splinter forend with engraved fittings and pistol grip stock featuring raised relief fluer-de-lis accents, contrasting wood grip cap with blank inscription oval, and engraved skeletonized buttplate with checkered bare butt. Includes extra matching numbered 26 inch barrel set with "2" on the forend lug, 2 3/4 inch chambers with ejectors, and chokes marked as improved cylinder/modified. Also included is a Huey two gun takedown case that houses both guns and all four barrel sets, two snap caps, and cleaning tools as well as original boxes for all barrels and guns, and two more leather bound takedown cases with nickel snap caps and oilers and canvas covers. Barrel measurements for extra set (R/L): bore 9 inches from the breech .619/.619 inches; choke constriction .012/.019 inches; minimum wall thickness .030/.031 inches. Barrel and stock measures (R/L): bores 9 inches from the breech .619/,619 inches; choke constriction .019/.039 inches; minimum wall thickness .032/.029 inches; 1 1/4 inch drop at comb; 2 inch drop at heel; 14 1/4 inch length of pull; weight 6 lbs 12 oz.

As "A". Includes its own extra 26 inch barrel set with "2" on the forend lug, 2 3/4 inch chambers with ejectors, and improved cylinder/modified chokes. Barrel measurements for extra set (R/L): bore 9 inches from the breech .619/.620 inches; choke constriction .012/.019 inches; minimum wall thickness .031/.032 inches. Barrel and stock measures (R/L): bores 9 inches from the breech .619/,619 inches; choke constriction .019/.039 inches; minimum wall thickness .029/.033 inches; 1 5/16 inch drop at comb; 2 1/4 inch drop at heel; 14 3/16 inch length of pull; weight 6 lbs 13 oz.