Manufactured in 2008. Stain blued steel barrels with two bands of zig zag and floral engraving, white bead front sight on the ventilated rib, 3 inch chambers, interchangeable choke tubes (skeet/skeet) currently installed, and automatic ejectors. Stainless Action with ornate tight scroll engraving on all sides with a two mallard marsh scene on the left side plate and three woodcock prairie scene on the right as well as a single woodcock on the bottom of the action above the model markings, Bottega C. Giovanelli signature on the bottom next to the trigger guard, single adjustable trigger, and manual selector safety. Mounted on a finely figured, multi-point checkered Deely release Schnabel forend and pistol grip stock with blank initial oval on the underside and Beretta Gel-Tek recoil pad. Includes original shipping box, Beretta hard case, generic take down case containing a non-matching extra 29 1/2 inch over/under barrel set with 3 inch chambers and interchangeable choke tubes (skeet/skeet installed) as well as a non-matching 34 inch ported Super X Trap Mono Top barrel with 2 3/4 inch chamber, fiber optic front sight installed and interchangeable choke tubes (full installed), and an Americase hardcase containing three choke wrenches, six barrel Briley full sleeves (two twenty gauge, two twenty-eight gauge, and two .410 bore). Extra barrel measurements: over/under set bores proved at 18.4mm/18.3mm (.724/.720) measure at .722/.723; minimum wall thickness .040/.038, single barrel bore proved at 18.3 (.720) measures at .721; minimum wall thickness .044. Bore and stock measurements (U/O): both bores proved at 18.4mm (.724) and measure at .722/.723; minimum wall thickness .040/.036; drop at comb 1 7/16; drop at heel 2 7/16; length of pull 14 3/4; weight 7 lbs. 15 oz.