Late production U.S. Springfield Model 1795 Type IV muskets such as this one were manufactured between late 1813 through early 1815 using a mixture of leftover components on hand at the armory in the transition leading up to the Model 1812. The Model 1795 lock has a projecting point at the rear with an updated round shaped hammer, and is marked with the script "US" over the federal eagle and shield emblem above "SPRINGFIELD" (arched) at the center and "1814" at the tail. "1814" date also marked on the buttplate tang (double stamped). The barrel is of the shorter length as on the Model 1812 and has a bayonet stud on top near the muzzle and New York State "NYS" along with "P/eagle head/V" proofs marked at the breech. Brass blade front sight on the rear strap of the upper barrel band. Sling swivels are mounted through studs on the middle band and trigger guard finial. Very faint script "US" marked on the left stock flat, and "X" carved into the left of the buttstock. "GDM" (George D. Moller) collection initials marked at the toe of the stock. Includes US socket bayonet, leather sling (one of the loops is ripped), and wood tampion. Provenance: The George Moller Collection

Good with gray/brown patina and scattered light to moderate pitting. Stock is very good as lightly sanded and re-oiled with scattered scratches and dents, and a few small chips at the toe. Mechanically fine. Included bayonet is good with brown patina and scattered mild pitting.