Manufactured between 1983 and 1989 as a faithful reproduction of the beloved Parker shotgun. Single brass bead sight on the solid matte rib, "1" marked on the lump, 2 3/4 inch chambers with ejectors, and chokes marked "MOD"/"FULL". The casehardened receiver shows the standard DHE grade engraving of hunting dogs on either side and a covey of pheasants on the underside along with "PARKER". The gun features single a selective trigger and automatic tang mounted safety switch. Beautifully figured, multi-point checkered walnut splinter forearm with engraved fittings including the Deeley latch release and straight grip stock with carved flats, blank inscription oval, and engraved skeletonized buttplate around checkered bare butt. Includes a second set of matching serial numbered 26 inch 28 gauge barrels with a "2" on the lump, 2 3/4 inch chambers with ejectors, and chokes marked "Q1"/"Q2". Also included is a leather bound takedown case that houses the whole set, a canvas cover, and two nickel snap caps as well as the original boxes and shipping box. Barrel measurements for set "2" (R/L): bore diameters measured nine inches from the breech .555/.555 inches; choke constriction .006/.011 inches; minimum wall thickness .022/.022 inches. Barrel and stock measurements for set "1" (R/L): bore diameters measured nine inches from the breech .554/.554 inches; choke constriction .018/.038 inches; minimum wall thickness .022/.023 inches; 1 5/16 inch drop at comb; 2 1/16 inch drop at heel; 14 3/16 inch length of pull; weight 5 lbs 11 oz.