Introduced late in World War II, the M2 Carbine was designed to work both as a factory-made machine gun as well as an armorer upgrade to the extant M1 carbine; this flexibility allowed armorers and arsenals to rapidly swap M1 and M2 components as needed to fulfill TOS requirements, and some manufacturers would make carbine receivers sans model number until the end of production, roll stamping the rest of the markings and then hand-stamping the "1" or "2" as needed for the day. "N" marked blade front and "HI" marked adjustable rear sights, undated Winchester barrel, and an overstamped number "2" on top of the original "1" mark on the receiver ring as typical of a period field converted M2 carbine. The transfer bar, selector switch, hammer, and milled trigger housing are not maker marked. The auto sear is marked "7161837" in white. Fitted in an unmarked modern reproduction low wood stock with an unmarked Type III barrel band, "IO" four-rivet upper handguard, and checkered buttplate. "UQ" marked magazine. Includes oiler and green canvas sling. Provenance: The Al Walker Collection

Very fine, retains 95% refinished parkerized finish with some light pitting (heavier below the wood line) and some areas of light surface corrosion on the barrel band, and some light handling marks. Modern replacement stock is very fine as lightly sanded and re-oiled with some light handling marks. The auto sear plunger is scuffed on the edge, and does not seat cleanly in the auto sear, popping out of position occasionally, otherwise mechanically very good. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.