Blued Winchester Proof Steel barrels with a single red bead sight on the matted vent rib which is marked "CUSTOM BUILT BY WINCHESTER", wedges of scroll engraving at either breech and muzzle, 3 inch chambers with automatic ejectors, and chokes marked "SKEET."/"SKEET." The blued action displays Winchester 21-4 pattern engraving consisting of extensive closed scroll surrounding three detailed game scenes including of a pair of mallards taking off from a marsh on the left, a pair of quail in flight over a field on the right, and a pair of pointing dogs in a field on the underside. The engraving extends to the triggerguard, tangs, and toplever. The gun features a single selective trigger and tang mounted safety switch. Beautifully figured, fancy 21-A pattern checkered beavertail forend with engraved fittings and ebony tip inlay and straight grip stock with checkered bare butt. Included are two extra matching numbered barrel set, one 27 inch 28 gauge featuring "SKEET"/"SKEET" marked chokes and 2 7/8 inch chambers with ejectors, and one 28 inch 20 gauge featuring chokes marked "FULL"/"FULL", 3 inch chambers with ejectors, and its own beavertail forend. Also included is a leather bound takedown case with canvas cover, oiler, and three sets of nickel snap caps, one for each gauge. Barrel measurements for the 20 gauge set (R/L): bore diameter nine inches from the breech .617/.617 inches; choke constriction .026/.026 inches; minimum wall thickness .025/.024 inches. Barrel measurements for the 28 gauge set (R/L): bore diameter nine inches from the breech .554/.552 inches; choke constriction .009/.015 inches. Stock measurements: 1 7/16 inch drop at comb; 1 3/4 inch drop at heel; 14 1/2 inch length of pull; cast-off; weight 7 lbs. 7 oz. Provenance: The Buffalo Bill Center of the West