Manufactured between 1983 and 1989 as a faithful reproduction of the beloved Parker shotgun. Single brass bead sight on the solid matte rib, 3 inch chambers with automatic ejectors, and chokes marked "MOD"/"FULL". The casehardened receiver shows the standard DHE Grade engraving of a setter on the left, a pointer on the right, and a covey of pheasants on the underside along with "PARKER" all surrounded by floral scroll. Single selective trigger and automatic tang mounted safety switch. Lightly figured, multi-point checkered walnut splinter forearm with Deeley style latch and engraved fittings and straight grip stock with teardrop flats, blank inscription oval, and engraved skeleton buttplate surrounding a checkered bare butt. Includes a second set of matching numbered 26 inch 20 gauge barrels with a "2" on the lump, 2 3/4 inch chambers with ejectors, and chokes marked "IMP. CYL"/"MOD". Also included are a leather bound takedown case that houses the whole set, two nickel snap caps, and boxes for the gun and extra barrels. Barrel measurements for set "2" (R/L): bore diameters measured nine inches from the breech .620/.620 inches; choke constriction .010/.017 inches; minimum wall thickness .035/.035 inches. Barrel and stock measurements for the primary set (R/L): bore diameters measured nine inches from the breech .622/.623 inches; choke constriction .020/.040 inches; minimum wall thickness .033/.034 inches; 1 5/16 inch drop at comb; 1 15/16 inch drop at heel; 14 5/16 inch length of pull; weight 6 lbs. 10 oz.