Auctions Consignment Latest FAQ About us

Lot 3070:First Year Production Colt First Model Dragoon Revolver

April 21st, 2013|Rock Island, IL

Lot 3070:First Year Production Colt First Model Dragoon Revolver

April 21st, 2013|Rock Island, IL

Estimated Price$12,000 - $18,000

First Year Production Colt First Model Dragoon Revolver

This is a scarce example of a Colt First Model Dragoon Revolver that was manufactured in the first year of production, 1848. Colt 1st Model Dragoon production started at serial number 1341. The serial numbers for 1000 1st Dragoon Revolvers purchased by the Ordnance Department in 1848 to arm the Regiment of Mounted Rifles start at 2000 which indicates that this is a civilian contract revolver. The revolver has the combination of oval cylinder stops and square back trigger guard which are distinctive to 1st Dragoon Revolvers. The brass trigger guard and back strap have traces of the silver-plated finish found on commercial production Dragoon revolvers. The top barrel flat is fitted with a dove-tail mounted rear sight. The rear sight is contemporary to the revolver but not a Colt fitting. The cylinder is the early style with a single locking pin. The top barrel flat is roll-stamped with the legend: "ADDRESS SAML COLT, NEW-YORK CITY-" reading towards the muzzle. The left side of the frame is stamped: "COLTS/PATENT/U.S." near the middle of the frame; later production Dragoon revolvers had the patent markings moved toward the forward edge of the frame (commercial Dragoon revolvers have "U.S." below "COLTS/PATENT"). The cylinder is roll-stamped with the Ranger and Indian fight scene and "MODEL U.S.M.R./COLT'S PATENT" above and below the serial number. The serial full number, "1717" is stamped on the bottom of the barrel lug, frame, trigger guard, back strap and side of the cylinder using the very small numbers found on early 1st Dragoon Revolvers. The partial serial number "717" is stamped on the wedge and the cylinder arbor pin. The loading lever is numbered "142". 1st Model Dragoon revolvers are scarce in any condition. Both the military and commercial production Dragoon revolvers were very popular on the frontier is the years before the Civil War. Dragoon revolvers are prominently displayed in early photographs of frontiersmen and California 'Forty-Niners'. As a result of hard frontier use, the survival rate of Colt 1st Model Dragoon revolvers is low and most of the remaining examples show extensive service wear.

ConditionGood. This revolver is a solid example of a working gun that was used but well cared for. The barrel, loading lever, cylinder, frame and hammer have an attractive, mottled gray-brown, patina with minor dents and scratches but no significant pitting. The cylinder scene is worn and barely visible. The percussion nipples have moderate flash pitting. The single safety pin is intact. The brass trigger guard and back strap have an attractive patina with traces of silver-plating in protected areas. The walnut grip is in good condition with moderate to heavy handling wear with more edge wear present on lower left panel. The serial numbers, barrel legend and patent markings are clear. The loading lever is a period replacement. The action functions well. This is a nice example of a hard-to-find, very early, commercial production, Colt 1st Model Dragoon Revolver.

Details

ManufacturerColt

ModelDragoon

TypeRevolver

Serial number

ClassAntique

Caliber / Gauge44 percussion

Barrel7 1/2 Inch

Finishblue/case-hardened

Gripwalnut

Item LocationRock Island, IL