This is a beautiful example of a special order factory engraved Skeet Grade Model 21 Shotgun. This shotgun originally came from the Peter and Patty Murray Collection and features floral scroll engraving on the receiver, break lever, trigger guard, forearm hardware and a 1 1/2 inch wedge on the breech end of each barrel. The engraving was done by Master Engraver Nick Kusmit and is signed "NICK KUSMIT" directly ahead of the trigger guard. The shotgun was assembled by Bill Smith, the Custom Shop Manager at the time. The bottom of the receiver is marked "SKEET". The top of the barrel at the breech is marked "MODEL 21 - WINCHESTER/TRADE MARK-28 GAUGE" and the left side is marked with the two line address/patent pending. The underside of each Winchester proof steel barrel is marked "SKEET" and the water table is marked "MADE IN U.S.A. MODEL 21" over the two line address. The water table and barrel flats are marked with the Winchester oval proof. The matching serial number is marked on the upper tang and barrel flat. The water table, lug and barrel flats are jeweled. Concave matte solid rib with a red front bead and a white center bead. Blue finish, gold plated single selective trigger, tang mounted manual safety with gold "SAFE" and mounted with a triple X fancy American black walnut forearm with multi-point fine-line checkering and pistol grip stock with a Winchester hard rubber pistol grip cap and leather covered recoil pad. Measurements - Choke: skeet, Chamber Length: 2 3/4 inches, Length of Pull: 14 1/8 inches, Drop at Comb: 1 1/4 inches, Drop at Heel: 2 inches, Cast: neutral, Toe: out 3/4 inch, Overall Weight: 8 pounds. Comes with the original box with hand written end labels and three interior boxes.