Premier Firearms Auction #89

August 25, 2023 to August 27, 2023

This auction has ended.

Premier Firearms Auction #89

August 25, 2023 to August 27, 2023

This auction has ended.

Page 1 of 38

Showing 1-50 of 1,879 results

Lot 1

Antique Winchester Model 1886 Lever Action Saddle Ring Carbine

Manufactured in 1894 with the desirable casehardened receiver that was standard until approximately serial number 108000. According to John T. Madl in his summer 2018 article in "The Winchester Collector", only 1,416 Model 1886 carbines were manufactured in .40-82 W.C.F. The top of the barrel on this example is marked with the standard two-line Winchester address, and the caliber marking at the breech. Just below the address on the upper left of the barrel, the retailer marking "Juan Canedo y Cia Rivadavia 611-Buenos Aires" is hand engraved. Juan Canedo took over a large firearms retail business in Argentina from Don Alfredo Gottling, who started the business in 1857. It is reported that Canedo's firm operated into the 1970's and were known to be a major importer of the most advanced firearms models from North America and Europe. The upper tang is marked with the model designation and the serial number is on the lower tang. It is fitted with a pinned blade front sight, folding ladder rear sight, and a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a carbine buttplate. Provenance: The Tom Selleck Collection

Antique

Caliber / Gauge: 40-82 WCF

Price Realized:

Scarce Special Order Winchester Model 1873 Lever Action Rifle with Desirable Casehardened Receiver and Factory Letter

Lot 2

Special Order Winchester Model 1873 Rifle

This is a fine example of a special order Winchester Model 1873 rifle that was manufactured in 1890. It is quite unusual for a special order Winchester rifle to only have two special order features. Usually when someone took the time to place a special order rifle they loaded them up with all types of special features. This rifle is documented with a Winchester factory letter that lists the two special order features as a factory set trigger and a X stock, again this is unusual in that when someone ordered a special grade of walnut they usually choose a high grade of deluxe walnut. The factory letter also notes that this rifle has the very desirable/rare casehardened receiver, and that it was in .38 caliber with a 26 inch octagon barrel and was received in the warehouse on July 25, 1890, and shipped the same day in order 14857. The casehardened receiver was actually not considered a special order feature; however, it is rare to find these color casehardened receivers at all because it was much easier to just blue all the components. This Third Model rifle has an integral dust cover rail and dust cover with serrated edges. The barrel has the standard nickel/silver blade sporting front sight with an adjustable buckhorn rear sight and it is also fitted with an original and very rare Model "62-B" folding, tang mounted, target rear sight. Although this tang sight is not mentioned in the factory letter it has been on the rifle for the period of use, as it has the same exact wear pattern as the rear of the receiver and upper tang area. These sights were produced on a very limited basis and were used only on the Model 1873 rifles. The top of the barrel is roll-stamped in two lines ahead of the rear sight with "WINCHESTER'S-REPEATING-ARMS. NEW HAVEN CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29 1866. OCTOBER 16. 1860", with the breech end of the barrel stamped with "38 W.C.F." just ahead of the receiver. The bottom of the brass cartridge elevator is stamped "38 CAL" in script. The serial number is stamped in script numerals on the lower tang between the lever latch and the tang screw. The crescent steel buttplate has a sliding brass trapdoor. The barrel, magazine, forearm cap and receiver are blue. The hammer, loading lever and buttplate have a color casehardened finish. The stock and forearm are varnished black walnut.

Documentation

Antique

Caliber / Gauge: 38 WCF

Price Realized:

Desirable First Model Winchester Model 1873 Lever Action Rifle with Special Order Half Magazine and Factory Letter

Lot 3

Winchester Model 1873 Lever Action Rifle with Half Magazine

The included factory letter confirms this gun as a rifle with an octagon barrel, plain trigger, and half magazine and lists it as received in the warehouse on June 24, 1878, and as shipped the same day in order 12203. The rifle is a first model, with the dust cover sliding in guide grooves on the top of the frame, and has a German silver blade front sight, adjustable sporting rear sight, the two-line address and patent marking ahead of the rear sight, "Model. 1873" in ornate script on the upper tang, the script serial number on the lower tang, a smooth forearm and stock with a crescent buttplate, and an empty compartment in the stock. The elevator has hand marked "F IIIIII F/F F X/XXX" markings. The meaning of these markings is unclear.

Documentation

Antique

Caliber / Gauge: 44-40 WCF

Price Realized:

Lot 4

Winchester Model 1866 Lever Action Rifle

This Winchester Model 1866 Lever Action Rifle was manufactured in 1881. The rifle has an octagon barrel that is fitted with a German Silver, fixed blade front sight with set screw and a Sporting style rear sight. A Lyman folding combination rear sight with "PAT. May 6/84" dated base is mounted on the receiver tang. The rifle has an iron crescent buttplate with sliding brass trap. The barrel, magazine and forearm cap have a blue finish. The loading lever, hammer and buttplate are casehardened and the loading gate and trigger have a niter blue finish. The walnut stock and forearm have a varnished finish. The rifle is complete with a three-piece, jointed steel, cleaning rod with brass tip that was furnished with Model 1866 Rifles. The top barrel flat is roll-stamped with the two-line address: "WINCHESTER'S-REPEATING ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29, 1866. OCTOBER 16.1860." ahead of the rear sight. The serial number is located on the lower receiver tang between the loading lever latch and the tang screw.

Antique

Caliber / Gauge: 44 RF

Price Realized:

Lot 5

Box of Winchester .44 Flat Rimfire Ammunition

Offered here is an extraordinary two piece box of Winchester .44 Flat Rimfire cartridges, with a green picture label featuring a cartridge illustration and orange end labels. This highly desirable ammo was produced for the Henry rifle and the Winchester Model 1866. Provenance: The Joe Marlin Hilliard Collection

Price Realized:

Charles Lancaster London Retailer Marked Winchester Model 1876 Lever Action Short Rifle with Factory Letter

Lot 6

London Retailer Marked Winchester Model 1876 Short Rifle

The included factory letter (copy) lists this Winchester Model 1876 short rifle with a 22 inch round barrel, plain trigger, and shotgun buttplate when it was received in the warehouse on December 1, 1884, and shipped on December 9 with 17 other arms to order number 16933. In the data discussed on page 253 of "The Winchester Book ," George Madis notes that only one of each 800 had a shorter than average barrel. The left side plate has a London retailer marking: "CHARLES LANCASTER/151 NEW BOND STREET/LONDON" above the number "7621." Many Model 1876 rifles were shipped to England and then found their way to Africa and India, where they were often employed against big cats. The rifle is fitted with a dovetail German silver blade front sight and an "1876" marked folding ladder rear sight. The barrel and receiver are stamped with London proofs at the breech. The receiver is a third model. The top of the barrel has the two-line Winchester legend ahead of the rear sight and "CAL./45-75" at the breech. The cartridge elevator is marked "45-75." The upper tang is marked "MODEL 1876." The straight grip stock is fitted with a steel shotgun buttplate.

Documentation

Antique

Caliber / Gauge: 45-75

Price Realized:

Lot 7

Winchester Model 1873 Lever Action Rifle in .22 Long Caliber

Manufactured in 1890, this is a high condition example of a Winchester Model 1873 small bore rifle. Winchester only manufactured approximately 19,552 Model 1873s in .22 short or .22 long between 1884 and 1904. It is a third model with integral dust cover rail and dust cover with serrations at the rear. The rifle is fitted with a dovetail blade front sight and an elevation adjustable buckhorn rear sight. The top barrel flat is stamped with the two-line Winchester legend ahead of the rear sight and "22 LONG" at the breech. The cartridge elevator is marked "22 CAL/LONG." The upper tang is marked with the model designation and the serial number is on the lower tang. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. The Model 1873 is one of the most famous of all American firearms and has been popularly known as "the Gun that Won the West" due to its popularity with pioneers. Today the Model 1873 holds a special place for modern collectors, especially those in high condition like this example. The Model 1873 was the first Winchester lever action to be chambered in .22 caliber. Rifles chambered in .22 long are scarcer than those in .22 short. As a "working man's gun" these models are becoming difficult to find in high condition.

Antique

Caliber / Gauge: 22 L

Price Realized:

Lot 8

Winchester Model 1886 Lever Action Rifle

The accompanying factory letter (copy) states the rifle was received in the warehouse on May 7, 1896 and shipped on October 30, 1897 and confirms the octagon barrel in .45-90 caliber and plain trigger. The rifle has the desirable early casehardened receiver found only on Model 1886 rifles manufactured prior to 1902. It is fitted with a dovetail blade front sight and an elevation adjustable rear sight. The top barrel flat is stamped with the two-line Winchester address and caliber designation. The upper tang is stamped "-MODEL 1886-," and the lower tang has the two-line patent dates marking and serial number. Mounted with a smooth forearm and straight grip stock. The buttstock is fitted with a crescent buttplate.

Documentation

Antique

Caliber / Gauge: 45-90 WCF

Price Realized:

Lot 9

Winchester Model 1886 Deluxe Takedown Lever Action Rifle

The powerful Winchester Model 1886 remains one of the most iconic lever action rifles. It was the first lever action rifle designed by John Moses Browning. Special order '86s remain especially popular, and examples in high condition like this one are highly sought after. This stunning takedown rifle was manufactured in 1894 and features a combination bead and globe front sight, rear sight dovetail filler block, a Lyman peep sight, full-length magazine tube, the two-line address and patent marking on top of the barrel, "40-65 W.C.F." on top at the breech, the patent marking and serial number on the lower tang, a checkered forearm and beautifully figured pistol grip stock with horn grip inlay and casehardened rifle buttplate.

Antique

Caliber / Gauge: 40-65 WCF

Price Realized:

Highly Desirable Winchester Repeating Arms Co. "Double W" 1897 Pattern Cartridge Bullet Board

Lot 10

Winchester Repeating Arms Co. "Double W" Cartridge Bullet Board

This is a very desirable 1897 pattern Winchester bullet board showing the iconic "Double W" pattern of cartridges. A gold painted border is mounted around the green board which measures approximately 31 1/4 x 49 inches and a wood frame outside that. The board displays a dark green background, red and white lettering and vignettes of a duck, bear hunting scene, and a moose bust (see photograph). The display consists of various cartridges and shotgun shells and nine containers of primers, each described below in white lettering. Except for the "32 Protector" round, all of the cartridges appear to be present and attached. The back of the board has the paper label stamped with the compliments of the factory, hanging instructions, and the number "1590". Including the original frame it measures approximately 39 1/2 x 57 1/4 inches.

Price Realized:

Lot 11

Special Order Deluxe Winchester Model 1873 Lever Action Rifle

This is an outstanding example of a very desirable Special Order Deluxe Winchester Model 1873 rifle. The factory letter confirms this rifle was received in the warehouse on November 8, 1887, and shipped as part of order number 24036 the next day in rifle configuration with a .38 caliber "1/2 Octagon" barrel, set trigger, checkered pistol grip stock, and desirable casehardened receiver. This Third Model rifle has integral dust cover rail and dust cover with serrated rear edges. The barrel, magazine, dust cover, bolt, and loading gate are blue, and the forearm cap, receiver, hammer, lever, and trigger are color casehardened. The stock and forearm have a high polish piano finish. Special order features on this rifle include the 24 inch part-round/part-octagon barrel, single set trigger, tang mounted adjustable peep sight, and fancy grain walnut forearm and pistol grip stock. The stock and forearm have Winchester "Style H" checkering. The pistol grip has an ebony inlay. The barrel has a Lyman folding combination front sight with colored bead and buckhorn, sporting style, rear sight with serrated edges. The crescent steel buttplate has a sliding brass trap. The top barrel flat is roll-stamped: "WINCHESTER'S REPEATING ARMS. NEW HAVEN. CONN. U.S.A./-KING'S IMPROVEMENT PATENTED MARCH 29. 1866. OCTOBER 16. 1860.-" in two lines ahead of the rear sight. The caliber "38 W.C.F." is stamped on the top barrel flat just in front of the receiver. "38 CAL" is stamped in script letters on the bottom of the cartridge elevator. The serial number is stamped in digits across the lower tang behind the lever latch. Provenance: The Joe Marlin Hilliard Collection

Antique

Caliber / Gauge: 38 WCF

Price Realized:

Exceptional Documented Winchester Model 1886 Lever Action Rifle in Desirable .45-90 W.C.F. with Factory Letter

Lot 12

Winchester Model 1886 .45-90 WCF Rifle

The John Moses Browning designed Winchester Model 1886 is one of the most popular Winchester lever actions. Browning's design, refined by Winchester's team, was capable of firing more powerful cartridges than any Winchester repeater before, making it an excellent big game rifle, but production was still very limited compared to Winchester's smaller rifles like the Model 1892 and 1894. Only 160,000 were manufactured between 1886 and the end of production in 1935, compared to 1,000,000 Model 1894s already manufactured by 1927, and 1,004,675 Model 1892s were manufactured before production was halted in 1941. The earlier 1886s, especially high condition rifles with stunning original case colors like this one, are highly sought after and valuable firearms. This beautiful Winchester Model 1886 comes with a factory letter (copy) stating it was received in the warehouse on November 18, 1892, shipped on May 2, 1893, and confirms the round barrel in .45-90 caliber and plain trigger. The barrel is fitted with a dovetail blade front sight and an elevation adjustable rear sight, and is marked with the two-line Winchester address and the caliber designation. The upper tang is marked "-MODEL 1886-." The lower tang has the two-line patent dates marking and serial number. It has the desirable early casehardened receiver found only on Model 1886 rifles manufactured prior to 1902. Mounted with a plain walnut forearm and straight grip stock. The buttstock is fitted with a crescent buttplate.

Documentation

Antique

Caliber / Gauge: 45-90 WCF

Price Realized:

Documented Special Order Winchester Deluxe Model 1894 Extra Lightweight Lever Action Takedown Rifle with Factory Letter

Lot 13

Winchester Deluxe Model 1894 Extra Lightweight Rifle

Manufactured prior to 1898, shipped subsequently in 1901, this is a very desirable documented special order Winchester Model 1894 rifle. The included factory letter lists the rifle in .30 caliber, with a round barrel, plain trigger, half magazine, oil finished checkered pistol grip stock, and in extra light configuration when received at the warehouse on 28 September,1901, and shipped on 30 September, 1901. It has the standard two-line address on top of the barrel and the caliber marking at the breech, with the two-line nickel steel marking offset to the left by the rear sight. The upper tang is marked with the three-line model, patent, and trademark information, and the serial number is on the bottom of the receiver. The left side of the lower tang is marked "12802 XXX R", with "12802" repeated in the stock inlet. It is fitted with a ramped Lyman beaded blade front sight (bead absent), elevation adjustable buckhorn rear sight, and a tang mounted peep sight. There are two extra drilled/tapped holes with filler screws in place on the left of the receiver, likely for sight mounting. It is mounted with an H-pattern checkered forearm and pistol grip stock with a hard rubber grip cap and shotgun buttplate (lower buttplate screw fits loosely).

Documentation

Antique

Caliber / Gauge: 30 WCF

Price Realized:

Desirable Framed Winchester Repeating Arms Co. Henry R. Poore "Bear Dogs" Advertising Print

Lot 14

Winchester Repeating Arms Co. Henry R. Poore "Bear Dogs" Print

This Winchester print was used in a variety of Winchester advertisements and depicts a barn setting with white "bear dogs" in the foreground and two large brown dogs that may be bloodhounds in the background. These dogs were reportedly part of the Winchester family hunting pack. The lower left corner is signed by the artist "H. R. Poore/Philadelphia". It is mounted in an ornately molded frame with floral/rose motifs throughout. It measures 33 3/4 x 41 1/2 inches including the period, elaborately carved frame.

Price Realized:

Exceptional New Haven Arms Company Henry Second Model Lever Action Rifle Formerly of the Legendary Mac McCroskie Collection

Lot 15

New Haven Arms Company Henry Second Model Rifle

This late production Henry rifle was manufactured by the New Haven Arms Company in 1866. The rifle has the features typically found on late production Henry rifles which include: (1) square back, nickel-silver, front sight blade, (2) folding leaf rear sight with 900 yard center notch and elevator bar stop screw, (3) large diameter magazine follower, (4) beveled follower cut in the receiver, (5) second style receiver without the alternative rear sight dove-tail, (6) brass buttplate with sharply pointed heel, and (7) larger, second style, New Haven Arms barrel legend with all serif letters. The rifle has a sling swivel on the left side of the stock and screw-mounted loop for a sling hook on the left side of the barrel. The sling swivel and loop were standard features on later production Henry rifles. The buttplate has a hinged brass trap door and the butt trap contains the four piece, jointed, steel cleaning rod with steel eyelet and brass tip furnished with Henry rifles after serial number 4000. The rifle has the distinctive brass "gun-metal" receiver and buttplate with blued barrel and integral 15-shot magazine. The bolt and screws are blued. The rear sight, hammer, trigger and sling swivel are color casehardened. The stock is oil-finished, straight grain, American walnut. The top of the barrel is roll-stamped with the legend: "HENRY'S PATENT. OCT. 16. 1860/MANUFACT'D BY THE NEWHAVEN ARMS. CO." in two lines ahead of the rear sight. The second line of the legend appears to have been factory rolled twice (legitimate error) and very faint outlines of the marking are visible below it. The roll marking legend error was performed by New Haven Arms and is interesting to say the least! The serial number is stamped: (1) on the top barrel behind the rear sight, (2) on the left side of the lower receiver rail underneath the stock, (3) in the upper stock inlet, and (4) on the inside of the buttplate below the lower screw hole. All of the visible serial numbers match. The buttplate and tang screws are the later cap head style and are correctly not serial numbered. Oliver Winchester's "W" inspection mark is stamped on the lower receiver tang behind the lever latch. The Henry lever action rifle was the most advanced firearm manufactured during the Civil War. Most of the Civil War production Henry rifles were privately purchased by individual Federal soldiers who appreciated the firepower of the 15-shot lever action magazine rifle. Following the Civil War, Henry rifles were popular on the frontier. Provenance: The Mac McCroskie Collection; The Joe Marlin Hilliard Collection

Antique

Caliber / Gauge: 44 Henry RF

Price Realized:

Early Production Antique Winchester Model 1886 Lever Action Rifle in Desirable .45-90 W.C.F.

Lot 16

Antique Winchester Model 1886 Rifle in .45-90 W.C.F.

Manufactured in 1887, the second year of production, with the desirable early casehardened receiver found only on Model 1886 rifles manufactured prior to 1902. As the spiritual successor to the Model 1876, these rifles were highly prized in the American west for their stunning firepower and rugged dependability. Standard two-line address and "45-90 W.C.F." on the top barrel flat, model designation on the upper tang, and two-line patent marking and serial number on the lower tang. Fitted with Lyman beaded blade front, elevation adjustable notch rear, and tang mounted peep sights. Mounted with a smooth forearm and straight grip stock with a crescent buttplate.

Antique

Caliber / Gauge: 45-90 WCF

Price Realized:

Winchester Model 1892 Lever Action Saddle Ring Carbine in .25-20 W.C.F.

Lot 17

Winchester Model 1892 Saddle Ring Carbine in .25-20 W.C.F.

The Model 1892 was a prized arm on the western frontier due to its firepower in a small package, and that popularity continued well into the early 20th century in a west that was far from tamed. This example was manufactured in 1919 with standard markings including Winchester factory oval proofs on the barrel and receiver at the breech. Fitted with square base pinned blade front and folding ladder rear sights, and a staple and saddle ring on the left of the receiver. Mounted with a smooth forearm and straight grip stock with a carbine buttplate.

Curio and Relic

Caliber / Gauge: 25-20 WCF

Price Realized:

Lot 18

Antique Winchester Model 1873 Lever Action Rifle

The Model 1873 became one of a handful of firearms that became synonymous with the American west due to their widespread use on the frontier and their ruggedness. This example was manufactured in 1883 as a Third Model with integral dust cover rail on top of the receiver and dust cover with gripping serrations at the rear. The standard two-line address/King's patent marking is on the top barrel flat along with the caliber marking. The upper tang is marked with the model designation and the lower tang has the serial number. It is fitted with German silver blade front and elevation adjustable buckhorn rear sights. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. The included factory letter confirms the current configuration as well as receipt at the warehouse on 28 March 1883, and shipment on 1 June 1883.

Documentation

Antique

Caliber / Gauge: 32 WCF

Price Realized:

Lot 19

Colt Model 1877 Lightning Double Action Revolver

The Colt Model 1877 revolvers were Colt's first double action revolvers and were designed by William Mason who also helped design the Single Action Army. Like the latter, these revolvers were popular with gun slingers in the Old West, and remained popular into the early 20th century. Manufactured in 1909, the top of the barrel has the standard two-line address and the left is marked with "COLT D.A. 38". The three-line patent dates marking is on the left of the frame followed by the circled Rampant Colt. The matching serial number is visible on the frame and trigger guard, and the assembly number "801" is inside the loading gate. The period replaced back strap is numbered "165768". It has standard features and is fitted with a pair of checkered grips.

Curio and Relic

Caliber / Gauge: 38 Long Colt

Price Realized:

Exceptional Special Order Casehardened Winchester Deluxe Model 1876 Lever Action Rifle with Factory Letter

Lot 20

Special Order Casehardened Deluxe Winchester Model 1876 Rifle

The Winchester "Centennial" Model 1876 is one of the rarest classic Winchesters. Only 63,871 were made c. 1876-1898. The model was fairly quickly supplanted by the Model 1886, but the Model 1876 has that classic early Winchester appeal with its side plates, dust cover, toggle link action, and combination of blued and casehardened metal and oil finished American walnut wood. The included factory letter confirms this rifle in .40-60 caliber with an octagon barrel, plain trigger, checkered pistol grip stock, and casehardened finish. It also lists the rifle as being received in the warehouse on September 4, 1886, and then shipped on September 11, 1886, in order 10113. The rifle features a Beach combination blade and globe front sight, notch and folding ladder rear sight, the standard two-line address and patent marking ahead of the rear sight, "CAL. 40-60" on top at the breech, a long range tang peep sight, plain trigger, deluxe checkered forearm and pistol grip stock with contrasting grip inlay, and crescent rifle buttplate with assembly number "2640". The stock compartment is empty. The forend cap, frame, hammer, lever, and buttplate are casehardened. The barrel, magazine tube, and dust cover are blued. The loading gate is niter blued.

Documentation

Antique

Caliber / Gauge: 40-60 WCF

Price Realized:

Exceptional and Rare Burgess Gun Company "Folding Gun" Slide Action Shotgun with Waist Holster

Lot 21

Burgess "Folding Gun" Slide Action Shotgun

This is an exceptional example of a rare Burgess "Folding Gun" slide action shotgun manufactured by the Burgess Gun Co. of Buffalo, New York, circa 1892 to 1899. It is unknown what the total number manufactured was, but it is estimated to be only a few thousand were made. This shotgun has the unique design invented by American inventor Andrew Burgess who established himself in business in 1892 to manufacture this unusual repeating shotgun which has an iron sleeve over the stock wrist that activates the bolt and breech mechanism when slid backwards. Burgess was also noted for his lever action rifles made by Colt and Whitney. This particular "Folding Gun" has a 19 1/2 inch barrel and is hinged on the underside of the receiver with a lift lever on top which releases the barrel so that it can be folded in half. A unique contemporary "quick draw" waist holster accompanies the shotgun. The shotgun was advertised as being especially adapted for police service, express messengers, U.S. Marshals, prison and bank guards. Most notably, a similar example was recovered at the scene of Lawman Pat Garrett's murder, reportedly Garrett's sidearm at the time. The underside of the receiver is marked with the three-line patent and reissue dates. The top is marked "BURGESS GUN COMPANY" flanked by light scroll on the right side and "-> BUFFALO, N.Y. U.S.A.<-" on the left side, and the matching serial number is stamped on the front left edge of the receiver, on the underside of the receiver, and on two in two places on the rear of the barrel assembly. Blade front sight and there is a dished out area in the top of the barrel release lever that serves as the rear sight. All blue finish and mounted with a multi-point checkered walnut forearm and pistol grip stock with a checkered hard rubber Burgess Gun Co. Dog's head logo buttplate. The choke gauges at modified and the length of pull is 13 5/8 inches.

Documentation

Antique

Caliber / Gauge: 12

Price Realized:

Deluxe Documented Acevedo Engraved Winchester Model 1873 Lever Action Saddle Ring Carbine

Lot 22

Deluxe Documented Acevedo Engraved Winchester 1873 SRC

This Winchester Third Model 1873 Carbine was manufactured in 1882, and subsequently Master engraved. The carbine is accompanied by a letter from Master Engraver Horacio Q. Acevedo that states he engraved this carbine in 1960-1961. Horacio Acevedo was a native of Mexico who began work as an engraver at age 13. He came to the United States in 1959, and worked as a custom gunsmith and engraver until his death in 2010. He specialized in the intricate engraving of antique Winchester and Colt firearms. The carbine has a deluxe finish with high polish blue on the barrel, magazine, barrel bands, receiver, and buttplate. The hammer and lever are color casehardened. The stock and forearm are highly figured fancy grain walnut with a satin finish. The top of the barrel at the breech, the receiver, upper tang, and heel of the buttplate are decorated with deeply cut 19th century style scrollwork on a punch-dot background. The left sideplate is engraved with a highly detailed scene that depicts a mule-drawn Army supply train with cavalry escort. The right sideplate is engraved with a mounted civilian scout and cavalry patrol skirmishing with Native American warriors on a desert hillside. Both scenes are in the style of classic Fredrick Remington works. The carbine has the Third Model receiver with integral dust cover rail and dust cover with serrated edges. A staple-mounted saddle ring is located on the left side of the receiver. The barrel has a block front sight mounted behind the barrel band and early non-adjustable leaf rear sight. The carbine style buttplate has a sliding brass trap door. The top of the barrel is roll-stamped "WINCHESTER'S-REPEATING-ARMS. NEW HAVEN. CT./KING'S- IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860." in two lines ahead of the rear sight. "44 CAL." is engraved in script on the bottom of the brass cartridge elevator. The upper tang is roll-stamped "-MODEL. 1873.-" in fancy letters with foliate devices at either end. The serial number is roll-stamped in script behind the lever latch. Provenance: The Joe Marlin Hilliard Collection

Documentation

Antique

Caliber / Gauge: 44 WCF

Price Realized:

Lot 23

Winchester Third Model 1866 Lever Action Carbine

This exceptional Winchester Model 1866 carbine was manufactured in 1877. The included factory letter lists it as Type: carbine, Received in warehouse on September 25, 1877, and shipped from warehouse on October 11, 1877, on order number 9704. The carbine has the distinctive brass receiver and buttplate with blued barrel, magazine, barrel bands, and loading gate. The hammer and lever are color casehardened. The stock and forearm are oil-finished straight grain American walnut. The carbine has the Third Model, moderately curved receiver shape, and serial number located on the lower tang behind the lever latch. The front sight blade is an integral part of the upper barrel band. The barrel has a dovetail mounted two-leaf fixed rear sight with "1, 3," and "5" markings. The magazine has the earlier style threaded cap. The left side of the receiver has a staple-mounted saddle ring. The upper tang is not drilled and tapped for a rear sight. The buttplate has a sliding brass trap door and the butt trap contains a three-piece, jointed steel cleaning rod with brass tip. The top of the barrel is roll-stamped with the legend: "WINCHESTER'S-REPEATING-ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860." in two lines ahead of the rear sight. A small Winchester "S" inspection mark is stamped on the top of the barrel between the rear sight and the receiver. The serial number is stamped in script numerals on the lower tang between the loading latch and the tang screw. A cartouche that consists of the script letters "AOS" in a banner is stamped on the underside of the stock behind the lower tang. A round monogram with the intertwined letters "AOS" is stamped on the left side of the stock near the butt-plate. The cartouche is pictured on page 65 of "THE WINCHESTER BOOK" by George Madis who states that nearly 12,000 Model 1866 carbines in the 135,000-148,000 serial number range were sold to Argentina in 1877. Madis states that the Argentine Model 1866 carbines were stamped with the AOS marking. Provenance: The Joe Marlin Hilliard Collection

Documentation

Antique

Caliber / Gauge: 44 rimfire

Price Realized:

Lot 24

Antique Winchester Model 1873 Lever Action Rifle in .44 W.C.F.

The Winchester Model 1873 rifles are known as one of the "guns that won the West", and these rifles in .44 W.C.F. were very popularly paired with a Colt Frontier Six Shooter in the same caliber, so that only one type of ammunition needed to be sourced and carried on the frontier. Manufactured in 1884 as a Third Model with integral dust cover rail and dust cover with serrations at the rear. Two-line address/King's patent marking and "44 W.C.F." on the top barrel flat, model designation on the upper tang, serial number on the lower tang, and "44 CAL." on the bottom of the cartridge elevator. Fitted with Lyman beaded blade front and elevation adjustable notch rear sights. Mounted with a smooth forearm and a straight grip stock with a trapdoor crescent buttplate (cleaning rod not included).

Antique

Caliber / Gauge: 44 WCF

Price Realized:

Winchester Model 1892 Lever Action Saddle Ring Trapper's Carbine with Highly Desirable 16 Inch Barrel

Lot 25

Winchester Model 1892 Trapper's Carbine with 16 Inch Barrel

These shorter than standard, utilitarian carbines often saw hard use by those who carried them, such as the trappers from whom they got their name, or western ranchers in need of compact firepower. Many of these guns spent their life exposed to the elements along with their owners, and used as a tool with little thought of being viewed favorably in a future collectors market. Thus, these carbines are, more often than not, seen with very little finish remaining and wearing all of the scars of their working life. This example was manufactured circa 1921-1928 and features a 16 inch barrel, which is extremely desirable due to not requiring an exemption letter from the ATF for the barrel length. The carbine also has standard markings including the Winchester factory oval proofs on the barrel and receiver at the breech, pinned blade front and folding ladder rear sights, saddle ring and staple mounted on the left side of the receiver, and carbine stock. Provenance: The Brandhorst Collection

Curio and Relic

Caliber / Gauge: 25-20 WCF

Price Realized:

Lot 26

Winchester Model 1876 Lever Action Rifle

Manufactured in 1878, the larger caliber Model 1876 was popular among those in the West who believed .44-40 wasn't quite enough stopping power for whatever they might encounter. This example is a Second Model, with dust cover guide retained by two screws and a dust cover with checkered "thumbprint" grip. The round barrel is marked with the two-line Winchester address/King's patent marking. The rifle correctly lacks caliber markings, as the only caliber initially offered for the Model 1876 was .45-75 W.C.F. The upper tang is marked with the model designation, and the serial number is on the lower tang. It is fitted with a German silver blade front sight and "1876" marked folding ladder rear sight. It is mounted with a smooth forearm and straight grip stock with a trapdoor crescent buttplate (cleaning rod not included).

Antique

Caliber / Gauge: 45-75

Price Realized:

Lot 27

Antique Black Powder Frame Colt Single Action Army Revolver

The factory letter lists this revolver in blue finish and .45 caliber (grips and barrel length not listed) when part of a shipment of 50 guns of this type to J.P. Moore's Sons in New York City on March 30, 1876. The revolver has a blade front sight, "-COLT'S PT. F. A. MFG. Co HARTFORD. CT. U.S.A.-" on top of the barrel in serifed letters, the early two-line "PAT. SEPT. 19. 1871/PAT. JULY 2. 1872." patent marking on the left side of the frame, "45 CAL" on the left side of the trigger guard, matching visible serial numbers, and "2158" on the loading gate. The revolver is accompanied by a single loop holster with lined interior, tooled borders and an illegible rectangular bordered maker's mark on the body.

Documentation

Antique

Caliber / Gauge: 45 Long Colt

Price Realized:

Excellent, Rare and FRESH, Special Order, Antique Winchester Deluxe Model 1892 Lever Action Takedown Fancy Sporting Rifle with Factory Letter

Lot 28

Antique Winchester Deluxe Model 1892 Lever Action Takedown Rifle

Offered here is a highly sought after rarity in lever action collecting: an antique deluxe Winchester Model 1892 takedown rifle. Legendary Winchester expert and author George Madis calculated, "Only 1 of each 700 models 92 had pistol grips; only one of each 800 hand checkering or carving. When you consider the comparative rarity of many Winchesters, it is not surprising that all Winchesters are so eagerly collected." Model 1892s were considered a "working man's gun," and customers were not inclined to spend extra money for special features, thus making them a rarity in today's collector market, especially high condition examples. This high condition Model 1892 certainly ranks as one of the finest antique deluxe variations we have had the pleasure of cataloging. It is a must have for the serious Winchester collector! The accompanying factory letter confirms the 24 inch octagon barrel in .25-20 caliber, plain trigger, takedown configuration, and checkered pistol grip stock as well as serial number applied on July 7, 1898. The factory letter also states the rifle was received in the warehouse on October 4, 1898 and shipped the next day. The rifle has the standard two-line address and "25-20 W.C.F." marked on the top barrel flat, the three-line model/trademark/patent date on the upper tang, and the serial number on the bottom of the receiver. The left side of the lower tang is marked "5801 XXX", with the "5801" assembly number repeated on the buttplate and stock under the buttplate. Fitted with a dovetailed German silver blade front sight and elevation adjustable buckhorn rear sight. Mounted with a very finely figured, H-style checkered forearm and pistol grip stock with a hard rubber grip cap and crescent buttplate. Provenance: Wes Adams Collection, Property of a Gentleman

Documentation

Antique

Caliber / Gauge: 25-20 WCF

Price Realized:

Attractive, Rugged Winchester Model 1873 Lever Action Carbine with Frontier Repairs and Native American Style Tack Decoration

Lot 29

Antique Winchester Model 1873 Lever Action Carbine

Manufactured in 1883 as a Second Model, this carbine originally had the dust cover guide retained with two screws, and likely a dust cover with the "thumbprint" grip section, both of which are now absent. These carbines were incredibly popular in the American West due to their incredible firepower in a small, light, and mobile package. Carbines such as this were a favorite weapon of outlaw, ranchers, lawmen, settlers, and Native Americans for many decades, both for self protection and sustenance. This example certainly has the look of a gun that spent much of its life on the rugged frontier through its scars and makeshift repairs. The barrel has the two-line address and King's patent marking, with the caliber marking at the breech. The serial number is marked on the lower tang. It has a block blade front sight, and the rear sight dovetail is empty. The magazine plug is absent, with the end of the magazine showing signs of a potential incidental discharge of a round inside. There is a frontier style rawhide repair around the wrist, retaining the damaged stock to the receiver tangs. The original saddle ring staple is absent from the receiver with filler screws in the holes, and a new saddle ring and staple has been added to the stock at the base of the wrist. A rawhide sling has been tied to that and is retained on the forearm with another tightly wrapped band of rawhide. There are Native American style brass tacks decorating the stock throughout, all of which show the same weathered look as the rifle, and there are small brands stamped into both sides of the buttstock. The forearm has an interesting divot worn into the bottom side, a wear pattern that is often associated with guns that spent many years and miles rubbing against a saddle. Overall the carbine shows aging, wear, and repairs consistent with a gun that was used hard on the frontier for many years. Provenance: The Brandhorst Collection

Antique

Caliber / Gauge: 44-40 WCF

Price Realized:

Lot 30

Sharps Model 1874 Single Shot Sporting Rifle

These Sharps Model 1874 rifles were a highly valued arm on the frontier, not only due to their firepower but also their long range accuracy. These rifles were popular for both protection and hunting and saw widespread use throughout the turbulent American west. This specific example certainly has the "been there, done that" look of a western working gun. The top flat of the barrel has the "Old Reliable" marking, the Sharps Bridgeport address, and the caliber marking. The bottom of the barrel is marked with "4" and "12/16", and the serial number, which is also partially ("6483") inside the forearm. The left side of the receiver has the two-line Sharps patent marking. The main serial number on the upper tang is obscured. It is fitted with a German silver blade front sight and R.S. Lawrence folding ladder rear sight. It is mounted with a checkered Schnabel tip forearm and pistol grip stock. There is a period rawhide repair around the wrist area that appears to have been used to mend a large crack in the wrist that had temporarily put the rifle out of action. The buttplate is now also absent with some significant deformation on the buttstock, suggesting that the damage to the buttstock and crack in the wrist may have been due to the same impact.

Antique

Caliber / Gauge: 40-70

Price Realized:

Desirable Documented New Mexico Territory Shipped Acid Etched Panel Frontier Six Shooter Antique Black Powder Frame Colt Single Action Army Revolver with Factory Letter

Lot 31

Antique Frontier Six Shooter Colt Single Action Army Revolver

The factory letter lists this revolver in .44-40 with a 4 3/4 inch barrel, blue finish, and wood stocks when shipped to Manzanares & Company in Las Vegas, Territory of New Mexico, on June 18, 1887, in a shipment of 100 guns of this type. Browne, Manzanares & Co. had stores in Las Vegas and Socorro, New Mexico, in 1887. Francisco Antonio Manzanares (1843-1904) was an influential figure in territorial New Mexico in the late 19th century and was also the founder of the First National Banks in Las Vegas, Santa Fe, and Raton and represented the territory in Congress in March 1884-March 1885. 100 revolvers is a large shipment for what is still a rather small city today, but it was a rather lawless town in the 1870s and 1880s. Historian Ralph Emerson Twitchell wrote, "Without exception, there was no town that harbored a more disreputable gang of desperadoes and outlaws than did Las Vegas." It was also home to twenty-one of Theodore Roosevelt's Rough Riders during the Spanish-American War. The revolver has a blade front sight, the smaller dished ejector rod button, "COLT FRONTIER SIX SHOOTER" etched on the left side of the barrel, the two-line "COLTS PT. F. A. MFG. Co/HARTFORD. CT. U.S.A." on top of the barrel, the three-line patent marking on the left side of the "black powder" frame, "44 CAL" on the left side of the trigger guard, assembly number "698" on the loading gate, and matching serial numbers visible on the frame, trigger guard, and back strap.

Documentation

Antique

Caliber / Gauge: 44-40

Price Realized:

Lot 32

U.S. Colt Cavalry Model Single Action Army Revolver

The included factory letter states that this revolver was originally shipped to the U.S. government inspector at the Colt plant on 3 July 1890. Having escaped conversion to Artillery Model configuration and considering its look, one can easily theorize that this particular revolver may have been "liberated" from government stores by a deserter. The barrel has the one-line Hartford address (faint). The frame has the three-line patent dates marking followed by "US." Matching serial numbers are on the frame, trigger guard, back strap, barrel, and faintly on the cylinder. Rinaldo Carr's inspector initials "R.A.C." are on the barrel, frame, and cylinder. A "K" is below the serial number on the back strap and trigger guard. There is a very faint partial outline of a cartouche on the right of the grip, which has also been hand carved with initials that appear to be "WH". It was not uncommon in the American west for these desirable revolvers to be carried off by cavalry troopers who had decided to seek their fortunes elsewhere, and this example certainly has the look!

Documentation

Antique

Caliber / Gauge: 45 Long Colt

Price Realized:

Outstanding Documented Antique Early 1895 Production Winchester First Model 1894 Lever Action Rifle Serial Number 3079 with "10 O'Clock" Screw Frame in Desirable .38-55 W.C.F. with Factory Letter

Lot 33

First Year Production Winchester Model 1894 Lever Action Rifle

Manufactured in February of 1895, the second month of the second year of production. This Model 1894 rifle features the early "First Model" receiver featuring the "10 o'clock" screw by the loading gate. These First Model receivers are only found on Model 1894s as late as the early 7000 serial number range, but become very rare after around serial number 5220. From serial number 828 to serial number 5220, Model 1894 receivers are approximately split half and half between the First Model and Second Model receivers. It is believed that early on in Model 1894 production, these First and Second Model receivers were produced and assembled simultaneously in different parts of the Winchester plant, leading to this mix of receiver types on these early rifles. Many of these early First Model 1894s saw hard use in the untamed American West, and they remain a desirable collectible in almost any condition, making an example in outstanding condition like this an incredibly scarce, benchmark piece for a Winchester collection. The two-line Winchester address and caliber marking are on the top barrel flat. It is believed that nearly all of these First Model 1894 rifles were chambered in the early and desirable .38-55 caliber. The upper tang is marked with the three-line model, trademark, and patent information, and the serial number is on the bottom of the receiver. It is fitted with a combination front sight, an elevation adjustable buckhorn rear sight, and a Lyman peep sight mounted on the upper tang. It's mounted with a smooth forearm and straight grip stock with a crescent buttplate. The included factory letter confirms the current configuration as well as receipt at the warehouse on 18 March 1895 and shipment on 18 June 1895 in order number 13927.

Documentation

Antique

Caliber / Gauge: 38-55 WCF

Price Realized:

Very Fine Presentation Winchester Model 1894 Lever Action Rifle with Inscribed Plaque

Lot 34

Presentation Winchester Model 1894 Rifle with Plaque

Manufactured in 1919, with Winchester factory oval proofs on the barrel and receiver at the breech. The barrel has the standard two-line address/patent date marking and the caliber marking at the breech, as well as an importer mark on the bottom ahead of the forend cap. The standard three-line model and trademark information is on the upper tang, and the serial number is on the bottom of the receiver. It is fitted with Lyman beaded bade front sight (bead absent), blank filler in the rear sight dovetail, and a Lyman tang mounted peep sight. Import marked on underside of barrel. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. There is a silver plaque mounted on the left of the buttstock marked "PRES TO/W.E. LEARNED/By/FRIENDSHIP LODGE/#66 COOKSHIRE/SEPT-26-19". Cookshire is a town located in Quebec, Canada, and this plaque appears to be a presentation from a Masonic lodge. Provenance: The Wayne Connor Collection

Curio and Relic

Caliber / Gauge: 38-55 WCF

Price Realized:

Unusual Documented Antique Winchester First Model 1873 Carbine Conversion Lever Action Musket with Factory Letter

Lot 35

Winchester First Model 1873 Carbine Conversion Musket

Originally manufactured in 1876 as a First Model carbine with dual integral dust cover guide grooves on top of the receiver and a "thumbprint" checkered dust cover. The included factory letter states that the carbine was then altered at the factory to musket configuration with an angular bayonet on 7 March 1879 and shipped from the warehouse three days later in order number 14808. There are two visible filler screws on the left of the receiver where the saddle ring staple was removed. The barrel has the standard two-line address and King's patent marking on top and British proofs on the upper left of the barrel and receiver at the breech. There is a faint J. Kerr London Armoury stamp on the right side of the buttstock. Interestingly, the bottom of the cartridge elevator is marked "38 CAL." a caliber not introduced until 1879, and not the caliber that the musket is chambered in, indicating that this musket maybe have been somewhat of a factory "parts" conversion, potentially for submission for a military contract (Spanish military contract Model 1873 muskets also shipped in 1879). The model designation is on the upper tang and the serial number is on the lower tang. It is fitted with a block blade front sight and folding ladder rear sight, as well as sling swivels. It is mounted with a smooth forearm and straight grip stock with a carbine/military buttplate.

Documentation

Antique

Caliber / Gauge: 44-40 WCF

Price Realized:

Lot 36

Winchester Model 1895 Takedown .405 WCF Rifle

This is a desirable example of a Winchester Model 1895 .405 WCF Takedown rifle that was manufactured in 1914. The rifle is chambered for the very desirable .405 W.C.F. cartridge and has the takedown barrel seldom found on Model 1895 Rifles. The 24 inch round barrel has a "Winchester Express" front sight with bead and a rare Winchester Express rear sight with one-fixed and three folding leaves graduated from 100-400 yards. The rifle has a blued barrel, receiver, lever and checkered steel shotgun buttplate. The stock and forearm are straight grain walnut with a varnish finish. The forearm tip has an ebony inlay. The left side of the barrel is roll-stamped: "-NICKEL STEEL BARREL-/ESPECIALLY FOR SMOKELESS POWDER" in two lines below the rear sight. The caliber designation "405 W.C.F." is stamped on the upper left side of the barrel. Oval Winchester "W/P" proof marks are stamped on the top of the barrel and the receiver. The elongated, two-line, Winchester legend and patent dates are roll-stamped on the left side of the receiver. The upper tang is roll-stamped: "MODEL 1895/-WINCHESTER-/TRADE MARK REG.IN U.S.A.PAT. OFF" in three lines. The serial number is stamped across the bottom of the lower tang. British Nitro Proof marks and London "Crown/V" and "Crown/CP" proof and view marks are stamped on the left side of the barrel and on the takedown collar, left upper side of the receiver and on the top of the bolt. The number "56006" and some un-identified markings are stamped on the bottom of the stock behind the tang. The significance of the number and markings is unknown.

Curio and Relic

Caliber / Gauge: 405 WCF

Price Realized:

Lot 37

Engraved Winchester Model 1866 Lever Action Rifle

The custom engraving on this Winchester Model 1866 rifle from 1869 was inspired by patterns from renowned 19th century master engraver L.D. Nimschke. These patterns are similar to the Nimschke's smoke pulls, published in R.L. Wilson's "L.D. Nimschke Firearms Engraver" on pages 55 and 56. An autographed copy of Wilson's book is included. The frame is decorated with beautifully executed scrollwork on punch dot background. In the center of the scroll is a large screaming eagle head on the left side plate. The right side of the frame is engraved to match at the front and rear with a large blank scroll on the right side plate. Behind the blank inscription scroll is a shield divided between stars and stripes. The inscription scroll and shield pattern is found on Nimschke's signed engraved Model 1866 rifle no. 35383 as pictured in "L.D. Nimschke Firearms Engraver" on page xxviii. The same star pattern is used in two details on the underside of the frame. Light scroll engraving is on the buttplate tang and forend. Floral blossoms are engraved on the top and bottom of the frame and behind the hammer. The rifle is fitted with a dovetailed blade front sight and a folding ladder rear sight graduated to 900 yards. The top barrel flat is stamped "HENRY'S PATENT-OCT. 16. 1860/KING'S-PATENT-MARCH 29, 1866" ahead of the rear sight. The buttstock and buttplate are numbered to the gun. Sling swivels are mounted on the underside of the forend and buttstock. With a four piece cleaning rod.

Documentation

Antique

Caliber / Gauge: 44 RF

Price Realized:

Lot 38

Spencer Repeating Sporting Rifle

Very few sporting rifles were manufactured by Spencer, and educated estimates put total production well under a few thousand. The action first went into production in 1860, and, as soon as the Civil War started, all of the machinery and manpower was devoted to turning out rifles and carbines for the Civil War. George Armstrong Custer and others are known to have taken Spencer sporters to the West. It is chambered for the 56-46 Spencer cartridge (.44 rimfire) which was suitable for small to medium game. The matching serial number is marked on the top of the frame (the "1" is taken out by a screw hole) hidden underneath the tang peep sight and on the bottom of the barrel under the forearm. Marked "SPENCER REPEATING/RIFLE CO. BOSTON MASS./PAT'D MARCH 6, 1860." on top of the receiver. The assembly number "72" is stamped on various parts including the barrel, forearm, lever, breech block, buttplate, and buttstock (some require disassembly for viewing). Blade front sight, folding leaf rear sight, and tang mounted peep sight both without graduation markings. Mounted with a smooth walnut forearm with pewter tip secured by two screws and straight grip stock with steel buttplate.

Antique

Caliber / Gauge: 56-46

Price Realized:

Lot 39

Blued Finish Remington Model 1875 Single Action Army Revolver

While limited in production to only approximately 25,000-30,000 revolvers between 1875-1889, many of these "Improved Army" or "Frontier Army" revolvers saw hard use in the hands of Native Americans, settlers, and lawmen in the West. The Model 1875 was Remington's answer to the Colt Single Action Army and is arguably a more solid firearm with fewer main components than Colt's revolver, but it simply suffered in the famous "Peacemaker's" shadow. Handling one of these revolvers, it is easy to see that a gunslinger in the American West that truly knew their firearms might prefer one of these over the hype of the Colt Single Action Army. "E. REMINGTON & SONS. ILION.N.Y. U.S.A." marked on top of the barrel. There is a lanyard ring and stud fitted to the butt. The serial number "5615" is marked on the left of the grip frame and loading gate. The assembly number "30" is marked on the rear face of the cylinder, left of the grip frame, and stamped inside each grip.

Antique

Caliber / Gauge: 44 Remington CF

Price Realized:

Lot 40

Antique Colt Black Powder Frame Single Action Army Revolver

The Colt Single Action Army Revolver is arguably the most iconic handgun of Americana. In the hands of ranchers, cavalrymen, Native Americans, lawmen, and outlaws, the Peacemaker’s legacy was forged out in the hostile American West and continues to gain popularity among today's collectors. This example was manufactured in 1883, when the West was yet to be tamed. The included factory letter confirms the current configuration, grips not listed, as well as shipment on August 28, 1886 to Lee Fried & Company of Omaha, Nebraska, a distributor that was often merely a stop for guns on their way headed farther west. The top of the barrel is marked with the standard one-line address, three-line patent dates on the left of the frame, and "45 CAL" on the left of the trigger guard. Matching full serial numbers are visible on the frame, trigger guard, and back strap, and the partial matching number is on the cylinder. The inside of the loading gate has the assembly number "6648". It has standard features and is fitted with a pair of later production replacement, checkered hard rubber grips with Rampant Colt logos at the top.

Documentation

Antique

Caliber / Gauge: 45 Long Colt

Price Realized:

Fine Remington Hepburn No. 3 Single Shot Rifle with Special Order Heavy Barrel

Lot 41

Remington Hepburn No. 3 Single Shot Rifle with Heavy Barrel

Manufactured from 1883-1907, these Remington-Hepburn rifles would have made a very desirable long range hunting rifle on the American western frontier. The rifle features a special order heavy octagon barrel with a wind gauge globe front sight with spirit level, no rear seat, marked "REMINGTON ARMS CO. ILION N.Y." on top, "45.2 6/10" on the bottom, the serial number "7231" behind the forend lug on the bottom of the barrel, rear of the forend, and on the lower tang. "1463" on the bottom of the barrel at the breech. The frame is marked with the Hepburn patent marking on the left, and the serial number on the lower tang. A peep sight base is mounted to the upper tang. The rifle has a Schnabel tip forearm with contrasting tip inlay, and a semi-pistol grip stock with a checkered wrist. The consignor indicated the original owner was John D. McDonald, a major Jones Co. land owner in the late 1800s. A rifle such as this would have been highly valued by a western land owner or rancher for its long range accuracy and firepower to protect a herd.

Curio and Relic

Caliber / Gauge: 45-100

Price Realized:

Lot 42

New Haven Arms Company Henry Lever Action Rifle

This late production Henry rifle was manufactured by the New Haven Arms Company in 1866 and features the square-back, nickel-silver, front sight blade, a folding leaf rear sight with 900 yard center notch and elevator bar stop screw, the large diameter magazine follower, the beveled follower cut in the receiver, the second style receiver without the alternative rear sight dovetail, a rounded heel on the buttplate, and the larger, second style "HENRY'S PATENT. OCT. 16. 1860/MANUFACT'D BY THE NEWHAVEN ARMS. CO." address in two lines ahead of the rear sight in all serif letters. The rifle has a sling swivel on the left side of the stock and screw-mounted loop for a sling hook on the left side of the barrel. The sling swivel and loop were standard features on later production Henry rifles. The buttplate has a hinged brass door, and the stock has an empty compartment for a takedown cleaning rod. The serial number is stamped on the top barrel behind the rear sight. The Henry lever action rifle was the most advanced firearm manufactured during the Civil War, and late examples like this one remained in demand after the war and continued to be used alongside the new Winchester Repeating Arms Co. Model 1866. Both models were well-represented on the western frontier in the hands of both pioneers and various Native American nations, including the Lakota and Northern Cheyenne during the Great Sioux War of 1876.

Antique

Caliber / Gauge: 44 Henry RF

Price Realized:

Lot 43

Four-Piece Wood Henry Lever Action Rifle Cleaning Rod

This is a four-piece takedown cleaning rod for a Henry lever action rifle. The wooden rod sections have iron fittings, and one end is shaped for use as a jag for use with cleaning patch. It measures 26 3/4 inches when assembled. Provenance: The Joe Marlin Hilliard Collection

Price Realized:

Desirable Winchester Repeating Arms Co. 50 Count Box of .44 Henry Flat Rimfire Cartridges

Lot 44

Winchester 50 Count Box of .44 Henry Flat RF Cartridges

The box is constructed of plain cardboard with a green label on top with black lettering including the Stetson's patent, New Haven address, and a picture of a cartridge in the bottom left. The green wraparound label/seal is marked on three sides in black ink "44 FLAT. R.F." The factory seal is broken but the box contains its full compliment of cartridges which all appear to be "H" headstamped. Provenance: The Joe Marlin Hilliard Collection

Price Realized:

Rare Factory Engraved Winchester Deluxe Model 1890 Slide Action Rifle in .22 Short

Lot 45

Factory Engraved Winchester Deluxe Model 1890 Rifle

Manufactured in 1919. Beaded blade front and elevation adjustable rear notch sights, modified sixth style barrel inscription that includes the caliber marking, Winchester "WP" proofs on the barrel and receiver, flourishes of light scroll engraving on the top and upper left and right barrel flats, Third Model receiver with exposed locking lugs, standard markings on the upper tang, and matching numbers on the receiver and lower tang. The receiver is fully engraved with flowing American scroll designs, heart shaped borders, and small game panel scenes of a bounding rabbit on the right, and a raccoon in a tree on the left. Scarce fancy figured deluxe checkered slide handle and pistol grip stock with Winchester hard rubber grip cap, and blue steel crescent buttplate with light scroll engraving around the upper screw. The lower tang, end of the buttstock, and inside of the buttplate are marked with matching assembly number "208".

Curio and Relic

Caliber / Gauge: 22 RF Short

Price Realized:

Lot 46

Winchester Deluxe Model 1885 High Wall Schuetzen Rifle

Documented with several special order features, this exceptional deluxe Model 1885 rifle represents the apex of Winchester single shot craftsmanship at the end of the 19th century. The condition alone makes this Model 1885 worthy of the finest collections. Add the special order features, this rifle reaches a category of collectability that only a few firearms reach. The accompanying factory letter confirms the no. 5 octagon barrel in .32-40 caliber, Schuetzen set trigger, checkered pistol grip stock, mid-range and windgauge sights, no rear seat, Helm buttplate, palm rest, and spur lever. The letter lists a 26 inch barrel, but this is a factory error as the barrel is 36 inches, a rare barrel length for this model. The letter also confirms the rifle was received in the warehouse on January 11, 1898 and shipped the same day. This high condition single shot was the 2013 Winchester Arms Collectors Association winner of Best Single Weapon Display at the Western Show, Reno, Nevada. The WACA recognition plaque for this award is included. The No. 5 heavy barrel is original as it still lacks a rear sight seat. The no. 5 is a scarce barrel as the No. 3 barrel was considered the standard type of a Schuetzen. The top barrel flat is stamped with the two-line Winchester New Haven address and "32-40" caliber designation. The lower tang has the patent dates marking and the serial number. The casehardened receiver is fitted with double set triggers. The deluxe XXX walnut forearm and pistol grip stock are checkered. The forearm has an ebony tip insert. The left side of the lower tang is marked "5121 XXX CPM." The assembly number "5121" is repeated on the buttplate and butt of the stock. The stock features a Helm buttplate and factory hard rubber grip cap. Provenance: Property of a Gentleman; 2013 Winchester Arms Collectors Association winner of Best Single Weapon Display

Documentation

Antique

Caliber / Gauge: 32-40

Price Realized:

Lot 47

Evans New Model Lever Action Sporting Rifle

The rare New Model Evans Lever Action Repeater is first and only in multiple categories: it is the only repeating rifle to be manufactured in Maine, and it is the highest capacity repeating rifle made with a 28 round integral magazine to the buttstock. The Evans Repeating Rifle Company marketed this rifle to politicians, celebrity types, and famous shooters of the time in an effort to win military contracts in the Americas and even with the Russian Tsar. The company did not secure any contracts, however, and the Evans fell into obscurity. This high condition New Model Sporting Rifle is one of an estimated 3,000 manufactured circa 1877 to 1879 divided into 26, 28, and 30 inch barrel variants. The top barrel flat is marked with "EVANS REPEATING RIFLE MECHANIC FALLS, ME PAT. DEC 8, 1868 & SEP. 16, 1878 U.S.A.". It has a dovetailed triangular front sight, a notch and ladder folding rear sight graduated to 1100 yards, a smooth forend with a steel cap and a two piece buttstock with a crescent steel buttplate (a screw is absent from the right side of the buttplate).

Antique

Caliber / Gauge: 44 Evans

Price Realized:

Incredible "Evans Sporting Rifle" Marked Nickel Plated Evans Repeating Rifle Co. New Model Lever Action Rifle

Lot 48

Evans New Model Lever Action Sporting Rifle

The Evans Repeating Rifle Co. manufactured Evans repeaters in several variations based upon designs by Warren R. Evans and his brother George F. Evans in the 1870s. It was tested by the U.S. military and some were also purchased by the Russian Empire. The early Evans held up to 38 rounds of ammunition, and the later examples still held an impressive 26-28 rounds in the integral magazine in the butt. These rifles received some renewed attention in recent years thanks to stunning high art examples sold by Rock Island Auction Company, including one now in the Metropolitan Museum of Art, and the distinctive Evans rifle's inclusion in the award winning western video game Red Dead Redemption. Like Winchester, they offered carbines, sporting rifles, and military "muskets" and offered special presentation pieces to various popular figures to promote the guns. They manufactured both "Old Model" and "New Model Rifles." The company started to fold in 1879 and its entire stock was purchased by E.G. Ridout & Co. of Boston in August of 1881. The distinctive New Model Evans rifles with "EVANS SPORTING RIFLE" marked on their barrels are believed to have been assembled after the company went bankrupt by/for E.G. Ridout & Co. Most of these examples have the 30 inch round musket barrels fitted with sporting rifle style forends and have the sling swivels removed. E.G. Ridout & Company ran advertisements for Evans rifles with either 28 or 30 inch barrels and "saddle rifles" with 22 inch barrels in 1881 (see for example The Leavenworth Times on August 18, 1881). They made some rather fantastic claims about their safety and capabilities but did note that these rifles held more than double the number of cartridges as competing rifles. The advertisement included "unsolicited testimonials" from several western figures, including Kit Carson Jr. claiming "I have shot 60 Buffaloes at one run, and pennies from between my wife's fingers, at for paces." They offered a "$40 Rifle For Only $15." This rifle has a shorter octagon barrel than even the standard sporting rifles and carbines rather than a long "musket" barrel and has a full nickel plated finish aside from the casehardened components of the action. It may be truly one-of-a-kind. The barrel has a blued dovetailed blade front sight with brass blade and set screw, "EVANS SPORTING RIFLE." stamped in large letters on top, and a blued Evans notch and folding ladder rear sight. The Schnabel tip forearm is secured by a single screw and has triangular panels of checkering on the sides and an "88" inside. There is a "0" marked on the bottom of the frame to the left of the trigger. The bottom of the lower buttstock panel has traces of where a sling swivel was mounted. The version has the tail end of the lever curled forwards and no thumb screw catch.

Antique

Caliber / Gauge: 44 Evans

Price Realized:

Lot 49

Marlin Deluxe Model 1889 Lever Action Rifle

This is a high condition, highly desirable deluxe variation of Marlin's Model 1899 rifle. The accompanying factory letter confirms the 26 inch octagon barrel in .32 caliber and pistol grip stock. High end finishes were rarely noted in the Marlin factory records. The deluxe stock is factory original. Very few Model 1889s left the factory with special order features. The rifle is equipped with a German silver blade front sight and an elevation adjustable rear sight. The top barrel flat carries the two-line address/patent date marking ahead of the rear sight and "32-W" at the breech. "MARLIN SAFETY" is stamped on top of the casehardened frame. The serial number is stamped on the underside of the frame. The forearm and pistol grip stock are checkered. The stock is fitted with a crescent buttplate. Provenance: The Tom Selleck Collection

Documentation

Antique

Caliber / Gauge: 32 WCF

Price Realized:

Lot 50

Marlin Deluxe Model 1893 Lever Action Rifle

This highly attractive deluxe variation of Marlin's famed Model 1893 lever action rifle was manufactured in 1904. Model 1893s were a "working man's gun" and few customers were willing to pay extra for deluxe features. These deluxe models are becoming difficult to find, especially those in high condition like this example. The rifle is fitted with a German silver blade front sight and an elevation adjustable rear sight on a barrel stamped with the two-line address/patent dates marking and "30-30" on the top flat and "SPECIAL SMOKELESS STEEL" on the upper left flat. "MARLIN SAFETY" is stamped on top of the casehardened frame. The upper tang is marked "MODEL/1893." The serial number is on the underside of the frame. The rifle has a half magazine tube. It is mounted on a checkered forearm and pistol grip stock. The stock is fitted with a crescent buttplate.

Curio and Relic

Caliber / Gauge: 30-30

Price Realized:

Page 1 of 38