This is an attractive example of an early production Model 1903 Springfield rifle that was manufactured in 1907 that has been fitted with a fully figured, tiger stripped pattern walnut buttstock. These fully figured stocks are seldom encountered as they had a tendency to warp and/or split over time, so they were not favored for service rifles. It has the standard five-line receiver markings over serial number "182222" and the original barrel is marked "SA/3-07", indicating manufacture in early 1907. The stock is the correct early, NO-Bolt "S" pattern with finger grooves on the sides, with the correct early no-clip handguard without the sighting groove down the top. It is correctly stamped with a small "s" at the rear in front of the rear sight. It has the standard front sight with the early pattern 2,400 yard rear sight with the bright polish face with the small platinum sighting line at the bottom, with the grooved windage and elevation knobs. All correct early features. It has the correct all milled components with a late 1918/19 pattern RIA manufactured bolt that is stamped with "NS" on the under side of the safety lug with the slightly swept back handle. It comes with a original 1918 dated leather sling and a early M1905 pattern bayonet and first pattern scabbard. The bayonet is stamped "SA/1906" at the hilt and the obverse is stamped "U.S./270215" and the scabbard is stamped "RIA/1906/US" on the back side. Provenance: The George Moller Collection