Premier Firearms Auction #88

May 19, 2023 to May 21, 2023

This auction has ended.

Premier Firearms Auction #88

May 19, 2023 to May 21, 2023

This auction has ended.

Page 1 of 1

Showing 1-32 of 32 results

Factory G. Bertella Signed Engraved Beretta Model S3 EELL Special Skeet Hand Detachable Sidelock Over/Under Shotgun

Lot 500

Bertella Engraved Beretta Model S3 EELL Hand Detachable Sidelock

Blued Bohler steel barrels with dual bead sights on the matted vent rib which is marked at the base with a gold inlaid "I", 1968 dated Italian proofs, and 2 3/4 inch chambers with automatic ejectors. The coin finished hand detachable sidelock action displays highly attractive near full coverage broad leafy scroll engraving over a darkened matted background extending to the tangs, triggerguard, and nicely pierced toplever which also shows a gold inlaid crown. The gun features gas checked firing pins, a single gold trigger, and a tang mounted safety with gold inlaid "S". The triggerplate is signed "G. BERTELLA" to the right of the triggerguard. Beautifully figured, multi-point checkered forend with engraved fittings and straight wrist stock with a Pachmayr rubber recoil pad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech proved at 18.5/18.4mm (.728/.724 inches) and measured .733/.730 inches; choke constriction .002(jug)/.003(jug) inches; minimum wall thickness .033/.033 inches; 1 7/16 inch drop at comb; 2 inch drop at heel; 14 5/16 inch length of pull; weight 7 lbs. 5 oz.

Curio and Relic

Caliber / Gauge: 12

Factory Dario Candito Signed and Engraved Beretta S3 EL Hand Detachable Sidelock Over/Under Shotgun with Case

Lot 501

Candito Engraved Beretta S3 EL Sidelock Over/Under Shotgun

Blued Bohler steel barrels with dual bead (rear bead broken) sights on the matted vent rib, 1967 dated Italian proofs, import mark under the forend, 2 3/4 inch chambers with automatic ejectors, and chokes marked modified/full. The coin finished hand detachable sidelock action displays exceptionally fine floral scroll engraving over a nicely matted background which extends to the toplever, the tangs, and the triggerguard. The triggerplate is signed "Candito" to the right side of the trigger for Italian Engraver Dario Candito, known for his work on Beretta's famous Dante Alighieri tribute shotgun. The gun features gas checked firing pins, a single non-selective trigger, and a tang mounted manual safety switch. Beautifully figured, multi-point checkered forend with engraved fittings and a straight grip stock with blank inscription oval and brown rubber recoil pad. Included is a wood and leather takedown case containing a set of double triggers. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .724/.728 inches; choke constriction .020/.040 inches; minimum wall thickness .036/.038 inches; 1 1/4 inch drop at comb; 2 inch drop at heel; 14 3/8 inch length of pull; weight 7 lbs. 6 oz.

Has Box

Curio and Relic

Caliber / Gauge: 12

Price Realized:

Lot 502

Factory Engraved Beretta Model SO4 Trap Over/Under Shotgun

Blued Bohler Antinit Steel barrels with provision for a front bead (absent) on the matted vent rib, standard 1972 dated Italian proofs, some light engraving near the breech, and chambers marked 2 3/4 inches with automatic ejectors. The coin finished sidelock action displays very tasteful light scroll engraving with "SO-4" on the lower tang and "TRAP" inlaid in silver on the triggerguard. The gun features a single trigger and tang mounted safety/selector switch. Nicely figured, multi-point checkered forend with engraved fittings and pistol grip stock with right hand palm swell and a ventilated Beretta recoil pad. Includes a Beretta takedown case. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved at 18.5/18.4 mm (.728/.724 inches) and measured .731/.730 inches; choke constriction .031/.039 inches; minimum wall thickness .028/.031 inches; 1 5/16 inch drop at comb; 1 13/16 inch drop at heel; 14 9/16 inch length of pull; weight 7 lbs. 10 oz.

Has Box

Curio and Relic

Caliber / Gauge: 12

Price Realized:

Lot 503

Engraved Beretta 20 Gauge Model AS-20EL Over/Under Shotgun

Blued Bohler steel barrels with a single brass bead sight on the matted vent rib, 1961 dated Italian proofs, import mark beneath the forend, and 2 3/4 inch chambers with ejectors. The coin finished action displays attractive scroll engraving with floral flourishes extending to the toplever, tangs, and triggerguard. The gun features a single trigger and a tang mounted manual safety switch. Beautifully figured, multi-point checkered forend with engraved fittings and slender straight grip stock with checkered bare butt. Includes a Beretta canvas and leather takedown case and a pair of snap caps. Barrel and stock measurements (U/O): bore diameter nine inches from the breech proved at 15.9/15.8mm (.626/.622 inches) and both measured .637 inches; choke constriction .026/.036 inches; minimum wall thickness .026/.028 inches; 1 3/8 inch drop at comb; 2 1/4 inch drop at heel; 14 5/8 inch length of pull; weight 5 lbs. 7 oz.

Has Box

Curio and Relic

Caliber / Gauge: 20

Price Realized:

Lot 504

Factory Engraved Beretta Model S3 Sidelock Over/Under Shotgun

Blued Boehler steel barrels with a single steel bead sight on the matted vent rib, standard Beretta markings, import mark under forend, and 2 3/4 inch chambers with automatic ejectors. The coin finished sidelock action displays extensive floral and scroll engraving extending to the toplever and triggerguard. The gun features gas checked firing pins, double triggers, and tang mounted manual safety. Nicely figured multi-point checkered forend with engraved fittings and straight grip stock with ventilated brown rubber recoil pad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech proved at 18.5/18.4mm (.724/.728 inches) and measured .731/.727 inches; choke constriction .027/.039 inches; minimum wall thickness .027/.033 inches; 1 3/8 inch drop at comb; 2 1/16 inch drop at heel; 14 11/16 inch length of pull; weight 7 lbs. 8 oz.

Curio and Relic

Caliber / Gauge: 12

Price Realized:

Lot 505

Factory Engraved Beretta S2 Sidelock Over/Under Shotgun

Blued Bohler Steel barrels with a single white bead sight on the matted vent rib, 1966 dated Italian proofs, import mark under forend, 2 3/4 inch chambers with automatic ejectors, and chokes marked modified/full. The coin finished sidelock action displays scroll engraving surrounding floral flourishes and features a single trigger and a tang mounted manual safety switch. Nicely figured, multi-point checkered forend with engraved fittings and pistol grip stock with rubber recoil pad. Includes a leather bound takedown case. Stock measurements: 1 3/16 inch drop at comb; 1 3/8 inch drop at heel; 14 5/16 inch length of pull; weight 7 lbs. 10 oz.

Has Box

Curio and Relic

Caliber / Gauge: 12

Price Realized:

Fantastic Factory Giustacchini Signed and Engraved Beretta 28 Gauge Giubileo II Sideplated Boxlock Double Barrel Shotgun with Case

Lot 551

Giustacchini Engraved Beretta 28 Gauge Sideplated Shotgun

Blued Excelsior steel barrels with single steel bead sight on the matted flat solid rib, 2006 dated Italian proofs, standard markings, 2 3/4 inch chambers with automatic ejectors, and interchangeable chokes (modified/modified installed). The coin finished sideplated boxlock action displays exceptionally fine near full coverage scrolling sunflower designs over a beautifully contrasting matted background surrounding a Beretta banner on the underside. The engraving also includes a mirrored set of mallard and pheasant busts on the frame ahead of the sideplate. The engraving extends to both tangs, the pierced toplever, and the trigger guard, which shows off a highly attractive sunflower starburst design. The gun features a single trigger, rolled right hand trigger guard, and tang mounted safety/selector switch. The triggerplate is signed "Giustacchini 06", with a cat design incorporated into the "G". Highly figured exhibition quality multi-point checkered forend with engraved fittings, including the Anson button release, and straight grip stock with checkered wood buttplate. The included copy of a Beretta letter of authenticity confirms the model and caliber as well as a completion date of December 10, 2007. Also includes leather bound trunk style takedown case. Stock and barrel measurements (R/L): bore diameter nine inches from the bore both proved 13.9mm (.547 inches) and measured .584/.549 inches; 1 7/16 inch drop at comb; 2 5/16 inch drop at heel; 14 7/16 inch length of pull; weight 6 lbs. 1 oz.

Documentation

Has Box

Modern

Caliber / Gauge: 28

Factory Engraved Beretta Model SO5 Sporting Sidelock Over/Under Shotgun

Lot 563

Factory Engraved Beretta Model SO5 Sidelock Over/Under Shotgun

Blued Bohler Antinit steel barrels with single orange fiber optic bead sight on the matted vent rib, Beretta factory markings, 2001 dated Italian proofs, 2 3/4 inch chambers with automatic ejectors, muzzles threaded for Mobil Choke tubes (improved cylinder/improved cylinder installed), and light engraving surrounding the upper breech and chamber. The bright coin finished bolstered sidelock action displays highly attractive light scroll engraving tastefully dispersed around the receiver, lockplates, tangs, trigger guard, and toplever. The markings on the action are beautifully hand cut, reading "P. Beretta" on either lockplate, "SPORTING" on the trigger guard, "SO5" on the lower tang, and another "P. Beretta" on the underside of the action which has been filled by fine gold inlay. The gun features a single trigger and a tang mount manual safety/selector switch. Highly figured, exhibition quality Schnabel tip forend with coin finished engraved fittings, including the Deeley style release latch. The pistol grip stock is of equally exceptional quality and features a red rubber recoil pad with black spacer. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved at 18.4 mm (.724 inches) and measured .725/.725 inches; minimum wall thickness .034/.033 inches; 1 1/2 inch drop at comb; 2 3/8 inch drop at heel; 14 5/8 inch length of pull; cast-off; weight 8 lbs. 1 oz. Provenance: The Joe Marlin Hilliard Collection

Modern

Caliber / Gauge: 12

Fantastic Factory Ferraglio Signed, Game Scene Engraved, and Gold Inlaid Beretta 20 Gauge SO10 EELL Hand Detachable Sidelock Over/Under Shotgun with Case

Lot 564

Ferraglio Engraved Beretta 20 Ga SO10 EELL Shotgun

Blued steel barrels with a single brass bead sight on the matted flat solid rib which is marked with a panel of light engraving around "Beretta", 2006 dated Italian proofs, interchangeable choke system (modified/full installed), and 3 inch chambers with automatic ejectors. The coin finished hand detachable pinless sidelock action displays exquisitely executed tight scroll interspersed with heart shaped motifs of intertwining lines over a blackened backgrounds surrounding game bird scenes. The left lockplate shows a pair of snipe with one on the ground and the other in flight cut in two separate panels set into the scroll, the right lockplate shows two pheasants one standing in a field and the other appears to be flushing in two separate scenes, and the underside has a pigeon in flight and a grouse in the grass with one in flight and the other on the ground in the same fashion as the other scenes with all of the scenes being cut in outstanding detail. The engraving continues onto the pierced toplever which is adorned with a gold coronet, the trigger guard which has a blank area for inscription, and both tangs with the top showing the serial number inlaid in gold. The engraving is signed at the bottom of the scene on the underside "Ferraglio Inc. 06" for Italian Master Engraved Gabriele Ferraglio. The gun features a single trigger, right hand rolled trigger guard, and a tang mounted automatic safety/selector switch with gold inlaid "S". Beautiful highly figured, multi-point checkered forend with engraved fittings and a fancy gold Beretta emblem inlaid into the underside and a pistol grip stock with teardrop carved flats and a checkered bare butt. Included is a wood and black leather case with a pair of ebony snap caps, two nickel oilers, and a set of cleaning tools. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved and measured at 16.0mm (.630 inches); minimum wall thickness .027/.027 inches; 1 3/8 inch drop at comb; 2 1/4 inch drop at heel; 14 5/8 inch length of pull; cast-off; weight 6 lbs. 2 oz.

Has Box

Modern

Caliber / Gauge: 20

Price Realized:

Factory F. Bielli Signed Bulino Game Scene Engraved Beretta SSO Sidelock Over/Under Double Rifle with Zeiss Scope and Case

Lot 566

Bielli Game Scene Engraved Beretta SSO Sidelock O/U Double Rifle

Blued steel barrels with a ramped beaded blade front sight, two position (one standing, one folding) rear sight, and German claw mounts holding a Zeiss Diatal-Z 4x32mm T* scope on the partially matted solid rib. The barrels show light engraving, standard Beretta marking, import mark under the forend, 1986 dated Italian proofs, and chambers with automatic ejectors. The bright coin finished bolstered sidelock action displays attractive light scroll borders surrounding three incredibly detailed hand cut bulino engraved animals. The left lockplate shows a fierce lion with a rippling main, the right shows a large imposing brown bear, and the underside has an impressive bull moose. The lion and the bear are signed "F. BIELLI". The rifle features double triggers, double rolled trigger guard, and tang mounted manual safety switch. Beautifully figured, multi-point checkered forend with blue engraved fittings, including the Deeley style release, and pistol grip stock with engraved blue trapdoor grip cap, raised cheekpiece, engraved blued cartridge trap, and red rubber recoil pad. Included is a wood and leather takedown case. Length of pull 14 1/2 inches. Weight 12 lbs. 2 oz. including scope.

Has Box

Modern

Caliber / Gauge: 375 H&H magnum

Price Realized:

Bottega C. Giovanelli Game Scene Engraved Beretta .410 Bore Giubileo Over/Under Shotgun with Case

Lot 569

Giovanelli Game Scene Engraved Beretta .410 Giubileo Shotgun

Blued Excelsior steel barrels with a single bead sight on the matted vent rib, standard Beretta markings, light engraving around the breech, 2007 dated Italian proofs, interchangeable choke system (modified/full installed), and 3 inch chambers with automatic ejectors. The coin finished sideplated boxlock action displays beautifully executed floral scroll engraving surrounding a trio of game scenes with a mated pair of snipe in their nest on the left, a pair of pointers on the underside under a "BERETTA/GALLERY" banner, and a covey of quail in flight over a field on the right. The floral scroll also envelopes Beretta shields on either side of the action and extends to the trigger guard, both tangs, and the toplever. The engraving was carried out by the renowned firm Bottega C. Giovanelli, who have signed the work on the triggerplate to the right of the trigger. The gun features a single trigger and a tang mounted automatic safety/selector switch. Highly figured, multi-point checkered forend with engraved fittings, gold "PB" shield inlaid in the underside, and "Beretta/Gallery" in gold on the latch as well as a straight grip stock with a thick leather covered recoil pad. Included is a factory takedown case, a pair of nickel snap caps, and three extra choke tubes (cylinder, improved cylinder, and improved modified). Stock measurements: 1 5/16 inch drop at comb; 2 inch drop at heel; 15 1/2 inch length of pull; weight 6 lbs. 15 oz.

Has Box

Modern

Caliber / Gauge: 410

Price Realized:

Consecutive Pair of Gold Inlaid Beretta DT10 Trident Over/Under Shotguns -A) Beretta DT10 Trident Shotgun

Lot Contains 2 Items

Lot 570

Consecutive Pair of Beretta DT10 Trident Over/Under Shotguns

Blued Excelsior steel barrels with red fiber optic front sight on the vent rib with gold inlaid "1" at the breech, 2000 dated proofs, chambers marked 2 3/4" with ejectors, chokes marked improved modified/full, a band of wavy line engraving at the front of the chamber and at the breech, and importer marking under the forearm. Blued action with "P. Beretta" inlaid in gold on either side as well as Beretta's trident logo on the underside above "DT10/Trident", carved fences, gold inlaid "1" on the trigger guard, crossbolt, and manual tang safety. Mounted in a magnificently contrasted, checkered walnut forend and pistol grip stock with gold inlaid "1" on the forend latch and "MG" on the bottom of the buttstock, and Decelerator buttpad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .726/.726 inches; choke constriction .031/.041 inches; minimum wall thickness .038/.041 inches; 1 5/16 inch drop at comb; 1 7/16 inch drop at heel; 14 5/16 inch length of pull; weight 8 lbs. 2 oz.

Modern

Caliber / Gauge: 12

Price Realized:

Factory Engraved Beretta 20 Gauge Model 687 Silver Pigeon III Over/Under Shotgun Two Barrel Set with Case

Lot 572

Beretta 20 Ga Model 687 Silver Pigeon III Shotgun 2 Barrel Set

Blued steel barrels with dual bead sights on the matted vent rib which has a silver "1" at the base, 3 inch chambers with ejectors, and interchangeable chokes (modified/improved modified installed). The coin finished action displays a pair of quail on the left, a pair of woodcocks on the right, and a single pigeon with model markings on the underside all surrounded by floral scroll. The gun features a single gold trigger and tang mounted safety/selector. Beautifully figured, upgraded checkered forend with engraved fittings and pistol grip stock with blank inscription oval and factory recoil pad. Includes an extra matching numbered 30 inch barrel set with its own forend, silver "2" at the base of the rib, 2 3/4 inch chambers, and interchangeable chokes (improved cylinder/modified installed). Also included is a Joel Etchen Guns canvas and leather takedown case and six extra choke tubes (20 gauge cylinder, skeet, and improved cylinder, and 28 gauge cylinder, skeet, and improved modified). Stock measurements: 1 1/2 inch drop at comb; 2 1/4 inch drop at heel; 14 3/4 inch length of pull; cast-off; weight 6 lbs. 5 oz.

Has Box

Modern

Caliber / Gauge: 20/28

Price Realized:

Lot 574

Engraved Beretta Model 687 Silver Pigeon III Over/Under Shotgun

Blued steel barrels with dual bead sights on the matted vent rib, 3 inch chambers with ejectors, and interchangeable chokes (none installed). The coin finished action displays a pair of mallards on the left, a pair of pheasants on the right, and a gold Beretta logo with model markings on the underside all surrounded by floral scroll. The gun features a single gold trigger and tang mounted safety/selector. Beautiful, highly figured, upgraded checkered forend with engraved fittings and pistol grip stock with right hand palm swell, adjustable comb, and Kick-Eez recoil pad. Included is a factory takedown case. Stock measurements: 1 13/16 inch drop at comb; 2 inch drop at heel; 14 7/8 inch length of pull; weight 7 lbs. 12 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Superb "C. Tomasoni" Signed African Big Five Game Scene Bulino Engraved Beretta 455 EELL Sidelock Double Rifle in 470 Nitro Express with Case

Lot 1517

African Big 5 Bulino Engraved Beretta 455 EELL Double Rifle

Massive blued Bohler Antinit Steel chopperlump barrels with a ramped brass beaded blade front sight, two position (one standing, one folding) rear sight with gold inlaid center lines on the matted rear quarter rib, 1996 dated Italian proofs, light engraving at either breech, and chambers with selective ejectors. The coin finished bolstered hand detachable pinless sidelock action displays three exceptional game scenes depicting five of Africa's famous Big Five. The left lockplate shows a rhinoceros standing firm in a savanna scene, the right lockplate has a cape buffalo standing on alert looking over the high grass, the underside of the action shows a massive bull elephant ready to charge, the toplever has a bust of a majestic lion, and the trigger guard shows a leopard preparing to strike under a set of three letter initials. All three scenes have been carried out in highly detailed bulino style engraving with the balance of the surface covered by broad leafy scroll over a matted background. The triggerplate is signed "C. Tomasoni", for Italian Master Engraver Claudio Tomasoni. The rifle features double triggers (front is articulated), bushed firing pins, a right hand rolled trigger guard, and a tang mounted manual safety switch. Beautiful highly figured, multi-point checkered splinter forend with coin finished engraved fittings and rotary lever release. The pistol grip stock is of the same exceptional quality with coin finished and engraved trapdoor grip cap, raised cheek piece, coin finished and engraved cartridge trap, and Pachmayr Old English rubber recoil pad. Includes a factory Beretta takedown case. Length of pull 14 3/4 inches. Weight 11 lbs. 13 oz.

Has Box

Modern

Caliber / Gauge: 470 Nitro Express

Price Realized:

Factory "ML Engraving" Signed and Engraved Beretta DT11L Sporting Over/Under Shotgun with Box and Case

Lot 1520

ML Engraving Signed and Engraved Beretta DT11L Sporting Shotgun

Blued steel barrels with dual bead sights on the matted vent rib, standard Beretta barrel markings, 2014 dated Italian proofs, interchangeable chokes (improved cylinder/modified installed), and 3 inch chambers with automatic ejectors. The action is covered in attractive broad scroll with interspersed flowers over a darkened background continuing onto the toplever, both tangs, and the triggerguard which has a blank oval for inscription. The gun features a single adjustable trigger and a tang mounted manual safety/selector switch. The triggerplate is signed "ML Engraving" for the firm that performed this cutting edge laser engraving with their propriety technology for Beretta. Beautifully figured, upgraded panel checkered Schnabel tip forend with matching engraving on the shoe and Deeley style release and pistol grip stock with adjustable comb and factory recoil pad. Includes the original factory box, factory case, extra firing pins, stock removal tool, and three extra choke tubes (cylinder, skeet, and improved modified). Barrel and stock measurements (U/O): bore diameter nine inches from the breech proved at 18.6mm (.732 inches) and measured .755 inches (tapers to .732 during the length of the barrel); minimum wall thickness .037/.036 inches; 1 1/2 inch drop at comb; 2 5/16 inch drop at heel; 14 1/2 inch length of pull; weight 8 lbs. 12 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Factory Master Giancarlo Turrini Signed and Engraved Beretta Model S3EL Hand Detachable Sidelock Over/Under Shotgun

Lot 1522

Turrini Engraved Beretta S3EL Hand Detachable Sidelock Shotgun

Blued steel barrels with a single orange sight on the matted vent rib, import mark under forend, 1969 dated Italian proofs, light engraving at the breech and end of the chamber, and 2 3/4 inch chambers with automatic ejectors. The coin finished hand detachable sidelock action displays extensive beautifully cut broad floral scroll engraving over a nicely matted background extending to the toplever, both tangs, and the triggerguard. The triggerplate is signed "G. TURRINI" to the right of the trigger for Italian Master Engraver Giancarlo Turrini. The gun features gas checked firing pins, a single trigger, and a manual tang mounted safety switch. Beautifully figured, multi-point checkered forend with engraved fittings and pistol grip stock with right hand palm swell, "ODD" in the inscription oval, and a brown rubber recoil pad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved at 18.4mm (.724 inches) and measured .727/.726 inches; choke constriction .018/.035 inches; minimum wall thickness .023/.033 inches; 1 9/16 inch drop at comb; 2 inch drop at heel; 15 7/8 inch length of pull; cast-off; weight 7 lbs. 10 oz.

Curio and Relic

Caliber / Gauge: 12

Price Realized:

Factory Engraved Beretta Model SO4 Special Skeet Over/Under Shotgun

Lot 1523

Factory Engraved Beretta Model SO4 Special Skeet O/U Shotgun

Blued Bohler Antinit steel barrels with orange front sight on the matted vent rib, standard 1987 dated Italian proofs, some light engraving near the breech, and chambers marked 2 3/4 inches with automatic ejectors. The coin finished sidelock action displays very tasteful light scroll engraving with "S.O.4" on the lower tang and "SKEET" inlaid in silver on the triggerguard. The gun features a single trigger and tang mounted safety/selector switch. Beautifully figured, multi-point checkered forend with engraved fittings and pistol grip stock with right hand palm swell and a Pachmayr Decelerator recoil pad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved at 18.4 mm (.724 inches) and measured .727/.726 inches; choke constriction .000/.000 inches; minimum wall thickness .035/.035 inches; 1 5/16 inch drop at comb; 2 1/8 inch drop at heel; 14 9/16 inch length of pull; weight 7 lbs. 14 oz. Provenance: The Joe Marlin Hilliard Collection

Modern

Caliber / Gauge: 12

Price Realized:

Factory Game Scene Engraved Beretta 28 Gauge Model S687 EELL Diamond Pigeon Sporting Over/Under Shotgun with Case and Extra Barrel

Lot 1524

Factory Engraved Beretta 28 Gauge Model S687 EELL Shotgun

Blued Excelsior steel barrels with a single steel bead sight on the matted vent rib, 1998 dated proofs, 2 3/4 inch chambers with automatic ejectors, and interchangeable chokes (improved cylinder/modified installed). The coin finished action displays scroll engraving surrounding a pair of mallards on the left, a trio of woodcocks on the right, and a woodcock on the underside and features a single gold trigger and tang mounted safety/selector. The triggerplate is signed "Bottega C. Giovanelli". Beautifully figured, multi-point checkered Schnabel forend with engraved fittings and pistol grip stock with Beretta recoil pad. Includes a factory takedown case, three extra choke tubes (28 gauge improved cylinder and full as well as a .410 bore full), and an extra non-matching set of .410 bore barrels with 3" chambers and interchangeable chokes (full/modified installed) Bore and stock measurements: Bore 9 inches from the breech .549/.549 inches; 1 9/16 inch drop at comb; 2 3/8 inch drop at heel; 14 3/8 inch length of pull; weight 6 lbs. 4 oz.

Has Box

Modern

Caliber / Gauge: 28

Price Realized:

Bottega C. Giovanelli Game Scene Engraved Beretta 20 Gauge Model 687 EELL Over/Under Shotgun

Lot 1525

Giovanelli Engraved Beretta 20 Gauge Model 687 EELL O/U Shotgun

Blued Excelsior steel barrels with single bead sight on the matted vent rib, standard Beretta markings and 1991 dated Italian proofs, interchangeable chokes (skeet/improved cylinder installed), and chambers marked 3 inches with automatic ejectors. The coin finished sideplated action displays extensive floral scroll engraving surrounding a trio of pheasants in an upland scene on the left side and a pair of woodcocks on the right. The trigger plate is signed "Bottega C. Giovanelli" for the famous engraving firm. The gun features a single gold trigger and a tang mounted safety/selector switch. Nicely figured, multi-point checkered forend with engraved fittings and pistol grip stock with blank inscription oval and Pachmayr Decelerator recoil pad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved 15.8 mm (.622 inches) and measured at .625 inches; minimum wall thickness .033/.034 inches; 1 7/16 inch drop at comb; 2 3/16 inch drop at heel; 14 9/16 inch length of pull; weight 6 lbs. Provenance: The Joe Marlin Hilliard Collection

Modern

Caliber / Gauge: 20

Price Realized:

Lot 1567

Engraved Beretta Model 471 Silver Hawk Double Barrel Shotgun

Blued steel barrels with a single bead sight on the smooth concave solid rib, 3 inch chambers with automatic ejectors, 2006 dated Italian proofs, and interchangeable chokes (improved cylinder/cylinder installed). The coin finished boxlock action shows scroll engraving with a gold hawk on the toplever and features a single trigger and a tang mounted safety/selector. Beautifully figured, multi-point checkered beavertail forend with lightly engraved fittings and pistol grip stock with Pachmayr Decelerator recoil pad. Includes a factory takedown case and three extra choke tubes (light modified, modified, and full). Stock measurements: 1 9/16 inch drop at comb; 2 3/8 inch drop at heel; 14 3/4 inch length of pull; cast-off; weight 7 lbs. 3 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Factory G. Bertella Engraved Beretta Model S3 EL Sidelock Over/Under Shotgun

Lot 3552

Bertella Engraved Beretta Mod. S3 EL Sidelock Over/Under Shotgun

Blued Bohler Antinit steel barrels with a single steel bead sight on the matted vent rib, import mark under forend, 1969 dated Italian proofs, light engraving at the breech and end of the chamber, and 2 3/4 inch chambers with automatic ejectors. The coin finished hand detachable sidelock action displays extensive beautifully cut broad floral scroll engraving over a nicely matted background extending to the toplever, both tangs, and the trigger guard which has a blank inscription oval. The triggerplate is signed "G. BERTELLA" to the right of the trigger. The gun features gas checked firing pins, a dual triggers, and a manual tang mounted safety switch. Beautifully figured, multi-point checkered forend with engraved fittings and straight grip stock with checkered bare butt. Barrel and stock measurements (U/O): bore diameter nine inches from the breech proved at 18.5/18.3mm (.728/.720 inches) and measured .730/.723 inches; choke constriction .023/.036 inches; minimum wall thickness .031/.037 inches; 1 3/8 inch drop at comb; 2 1/16 inch drop at heel; 14 1/4 inch length of pull; cast-off; weight 7 lbs. 6 oz.

Curio and Relic

Caliber / Gauge: 12

Price Realized:

Bottega C. Giovanelli Game Scene Engraved Beretta 20 Gauge Model 687 EELL Over/Under Shotgun Two Barrel Set

Lot 3562

Engraved Beretta 20 Ga Model 687 EELL Shotgun Two Barrel Set

Blued Excelsior steel barrels with single bead sight on the matted vent rib which is marked with a "1" at the base, standard Beretta markings, 1988 dated Italian proofs, chokes marked modified/full, and chambers marked 3 inches with automatic ejectors. The coin finished sideplated action displays extensive floral scroll engraving surrounding a flock of mallards in a water scene on the left side, a covey of quail in flight on the right, and a single woodcock on the underside. The triggerplate is signed "Bottega C. Giovanelli" for the famous engraving firm. The gun features a single gold trigger and a tang mounted safety/selector switch. Beautifully figured, multi-point checkered forend with engraved fittings and a "1" on the release latch and pistol grip stock with blank inscription oval and serrated wood buttplate. Included is an extra matching numbered 26 inch 28 gauge barrel set with a "2" on the rib, its own forend, 2 3/4 inch chambers, and chokes marked improved cylinder/modified. Also included is an aluminum takedown Americase that houses the entire set. Barrel measurements for the 28 gauge set (U/O): bore diameter nine inches from the breech both proved 13.8 mm (.543 inches) and measured at .551/.550 inches; choke constriction .006/.012 inches; minimum wall thickness .035/.033 inches. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proved 16.0 mm (.630 inches) and measured at .633/.631 inches; choke constriction .020/.032 inches; minimum wall thickness .028/.026 inches; 1 3/8 inch drop at comb; 2 1/8 inch drop at heel; 14 1/2 inch length of pull; weight 5 lbs. 14 oz.

Has Box

Modern

Caliber / Gauge: 20/28

Price Realized:

Lot 3571

Factory Engraved Beretta S2 Sidelock Over/Under Shotgun

Blued steel barrels which appear to have been sleeved with a single white bead sight on the matted vent rib, 2013 dated Italian proofs, import mark under forend, 2 3/4 inch chambers with automatic ejectors, and chokes marked improved modified/full. The coin finished sidelock action displays scroll engraving surrounding floral flourishes and features double triggers and a tang mounted manual safety switch. Nicely contrasted, multi-point checkered forend with engraved fittings and straight grip stock with Beretta ventilated recoil pad. Stock measurements: 1 3/8 inch drop at comb; 2 3/16 inch drop at heel; 14 1/2 inch length of pull; weight 7 lbs. 5 oz.

Modern

Caliber / Gauge: 12

Factory Game Scene Engraved Beretta Model 687 EL Over/Under Shotgun

Lot 3572

Factory Engraved Beretta Model 687 EL Over/Under Shotgun

Single bead sight on the matted vent rib, 3 inch chambers with ejectors, 1990 dated Italian proofs, and interchangeable chokes (skeet I/skeet I installed). The coin finished sideplated action displays scroll engraving around a trio of pheasants on the left, a pair of mallards on the right, and a grouse on the underside. Single gold trigger with tang mounted safety/selector. Nicely figured, multi-point checkered forend and pistol grip stock with Pachmayr Decelerator recoil pad. Stock measurements: 1 7/16 inch drop at comb; 2 5/16 inch drop at heel; 14 3/4 inch length of pull; weight 7 lbs. 9 oz. Provenance: The Joe Marlin Hilliard Collection

Modern

Caliber / Gauge: 12

Price Realized:

Lot 3575

Factory Engraved Beretta Silver Pigeon II Over/Under Shotgun

Blued Excelsior steel barrels with single white bead sight on the ventilated rib, a band of light wavy line engraving at the front and rear of the chamber, chambers marked 3 inches, and Mobilechoke system (modified/full) currently installed. The coin action displays floral scroll engraving on all sides with "P. BERETTA" in a scroll on both sides as well as relief chiseled game scenes of two pigeons on the left, and two ducks on the right. The underside of the action is also engraved with "P. Beretta" in a scroll above "SILVER PIGEON II". Mounted in a nicely contrasted multipoint checkered walnut Schnabel forend and pistol grip stock with silver initial escutcheon and Beretta recoil pad. Includes original box, choke tool, and two extra choke tubes (improved cylinder and skeet). Stock measurements: 1 7/8 inch drop at comb; 2 3/16 inch drop at heel; 14 1/2 inch length of pull; Weight 7 lbs. 15 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Lot 3578

Factory Engraved Beretta Model 686 Onyx Pro Over/Under Shotgun

Blued barrels with dual bead sights on the matted vent rib, 2013 dated Italian proofs, 3 inch chambers with automatic ejectors, and interchangeable chokes. The action shows light scroll engraving and gold filled maker and model makings and features a single trigger and tang safety/selector. Beautifully figured, Schnabel tip forend and pistol grip stock with factory recoil pad. Includes factory case, and three extra chokes (modified, light modified, and improved modified). Stock measurements: 1 1/2 inch drop at comb; 2 3/8 inch drop at heel; 14 10/16 inch length of pull; weight 7 lbs. 15 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Factory Engraved Beretta Model 687 Silver Pigeon III Over/Under Shotgun Two Barrel Set with Case

Lot 3580

Beretta Model 687 Silver Pigeon III O/U Shotgun Two Barrel Set

Dual bead sights, 3 inch chambers with ejectors, and interchangeable chokes (improved cylinder/improved modified installed). The action displays a pair of mallards on the left and pheasants on the right all surrounded by floral scroll. Single trigger and tang mounted safety/selector. Beautifully figured, upgraded checkered forend with engraved fittings and pistol grip stock with adjustable comb, blank inscription oval, and factory recoil pad. Includes an extra matching numbered 34 inch unsingle barrel with a 3 inch chamber and interchangeable chokes (modified installed). Also included is a Joel Etchen Guns canvas and leather takedown case and seven extra choke tubes (extended cylinder and skeet and flush improved cylinder, modified, two improved modified, and full). Stock measurements: 1 7/16 inch drop at comb; 2 1/4 inch drop at heel; 14 3/4 inch length of pull; weight 8 lbs. 7 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Lot 3582

Factory Engraved Beretta Silver Pigeon S Over/Under Shotgun

Single steel bead sight, 3 inch chambers with automatic ejectors, and interchangeable choke tubes (improved cylinder/skeet installed). The coin action displays floral scroll engraving on all sides and features a gold washed single trigger and automatic tang safety/selector. Multipoint straight grain walnut Schnabel forend with engraved fittings and pistol grip stock with a solid Beretta buttplate. Includes a Beretta hard case, a choke tool, an extra recoil pad, and an extra modified choke. Stock measurements: 1 9/16 inch drop at the comb, 2 3/8 inch drop at the heel, 14 5/8 inch length of pull, weight 7 lbs. 4 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Lot 3586

Beretta AL 391 Urika Semi-Automatic Shotgun with Case

White bead front and steel mid bead sights, chamber marked 3 inches, and Mobilechoke system (modified installed). Receiver features floral scroll engraving. Nicely contrasted checkered forend and pistol grip stock with Beretta recoil pad. Includes a Beretta hard case, choke tool, and four extra choke tubes (full, improved modified, skeet, and improved cylinder). Stock measurements: 1 3/8 inch drop at the comb; 2 7/16 inch drop at heel; 14 5/8 inch length of pull, and weight 7 lbs. 9 oz.

Has Box

Modern

Caliber / Gauge: 12

Price Realized:

Factory Master F. Bielli Game Scene Engraved Beretta Model 689E Over/Under Double Rifle with Scope

Lot 3590

F. Bielli Engraved Beretta Model 689E Over/Under Double Rifle

Blued steel barrels with a brass beaded blade front sight, two position (one standing, one folding) rear sight, and scope mounts holding a Leupold VX-II 2-7x33mm Shotgun scope on the partially matted solid rib. The barrels show light engraving at the upper breech, a gold inlaid "1" at the base of the rib, and 1986 dated Italian proofs. The bright coin finished action displays three big game busts with a bugling elk on the left, a red stag on the right, and a wild boar on the underside, all surrounded by light border engraving with flourishes around the bolts and pivot pin. The triggerplate is signed "Bielli" to the right and ahead of the trigger guard. The rifle features a pair of gold washed triggers and a tang mounted manual safety switch. Nicely figured, multi-point checkered Schnabel forend with engraved shoe and a gold inlaid "1" on the release lever and pistol grip stock with cheekpiece, blank inscription oval, and factory ventilated brown rubber recoil pad. Length of pull 14 3/8 inches. Weight 8 lbs. 12 oz. including scope.

Modern

Caliber / Gauge: 9.3x74R

Rare and Desirable Beretta Model 92FS Billennium Semi-Automatic Pistol with Box and Case

Lot 3757

Beretta Model 92FS Billennium Pistol with Box and Case

Manufactured in 2001 per the Italian "BP" proof. The Billennium pistol was limited to 2000 units, with only half of those making their way to the United States as a celebration of two million pistols manufactured. The slide is marked with a futuristic series of lines and dots to give an alien appearance with "billennium" and a cave painting style picture of a man with sword and shield ready for combat, as well as fish scale serrations at the rear. It is fitted with a set of adjustable three dot sights. The frame features a single action only trigger, extended magazine release, redesigned checkering on the gripstraps, and a set of carbon fiber grips. Included with the pistol is the original box, Billennium hard case, and an extra magazine.

Has Box

Modern

Caliber / Gauge: 9 mm para

Price Realized:

Page 1 of 1